Canon PowerShot ELPH 115 IS User Guide - Page 295
Wi-Fi
View all Canon PowerShot ELPH 115 IS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 295 highlights
ç Contents ç Chapter Contents 295 ELPH 130 IS IXUS 140 ELPH 120 IS IXUS 135 Wi-Fi Connection failed • No access points were recognized. Check the access point settings (= 218). • A device could not be found. Turn the camera off and on again, and retry the connection. • Check the device you want to connect to and make sure it is ready for connection. Cannot determine access point • The WPS buttons on numerous access points were pressed simultaneously. Try reconnecting again. No access points found • Check to make sure that the access point is turned on. • When connecting to an access point manually, make sure that you entered the correct SSID. Incorrect Wi-Fi encryption key/Incorrect Wi-Fi security settings • Check the access point security settings (=216). IP address conflict • Reset the IP address so that it does not conflict with another. Disconnected/Receiving failed/Sending failed • You may be in an environment where Wi-Fi signals are obstructed. • Avoid using the camera's Wi-Fi function around microwave ovens, Bluetooth devices, and other devices that operate on the 2.4 GHz band. • Bring the camera closer to the other device you are trying to connect to (such as the access point), and make sure there are no objects between the devices. • Check the connected device to make sure it is not experiencing errors.