Canon PowerShot SD4000 IS PowerShot SD4000 IS / IXUS 300 HS Camera User Guide - Page 129
Trimming
View all Canon PowerShot SD4000 IS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 129 highlights
Trimming You can cut out a portion of a recorded image and save it as a new image file. Trimming Area Trimming Area Display Recorded pixels after trimming Choose [Trimming]. ∆ Press the n button, choose the 1 tab and [Trimming], then press the m button. Choose an image. ∆ Press the qr buttons or turn the - dial to choose the image and press the m button. Adjust the trimming area. A frame will appear around the portion of the image to be trimmed. The original image will display in the upper left and the trimmed image will display in the lower right. ∆ If you move the zoom lever to the left or right, you can change the frame size. ∆ If you press the opqr buttons, you can move the frame. ∆ If you press the m button, you can change the frame orientation. ∆ In an image with detected faces, gray frames appear around the faces located in the upper left image. The frames can be used for trimming. You can switch between frames by turning the - dial. ∆ Press the n button. Save as a new image and display. ∆ Follow Steps 4 and 5 on p. 128. 129