Canon PowerShot SX230 HS PowerShot SX230 HS / SX220 HS Camera User Guide - Page 111
Adjusting the Flash Output
View all Canon PowerShot SX230 HS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 111 highlights
Adjusting the Flash Output In D mode, you can choose 3 levels of flash output. Set the mode dial to D. Choose the flash output level. z After pressing the m button, press the op buttons or turn the  dial to choose ~, then press the m button. Complete the setting. z Press the op buttons or turn the  dial to choose the flash output, then press the m button. X Once set, ~ will appear on the screen. • You can also set the flash output by pressing the n button to choose [Flash Settings] (p. 100) from the 4 tab, then choose [Flash Output] and press the qr buttons to choose a setting. • In M and B modes, you can set the flash output if you press the n button to choose [Flash Settings] from the 4 tab, then set [Flash Mode] to [Manual]. • With the flash raised, if you press the r button and immediately press the n button, the setting screen will appear. 111