Canon PowerShot SX230 HS PowerShot SX230 HS / SX220 HS Camera User Guide - Page 178

Using an Eye-Fi Card • The power saving function does not work while transferring images (p. 52). • If mode is chosen, the Eye-Fi connection will be interrupted. Choosing another Shooting mode or entering Playback mode will reopen the Eye-Fi connection, but movies made with mode may be retransferred. Checking Connection Information You can check the Eye-Fi card's access point SSID, or connection status. Choose [Connection info]. z Press the n button to choose [Eye-Fi Settings] from the 3 tab, then press the m button. z Press the op buttons or turn the  dial to choose [Connection info], then press the m button. z The connection info screen will appear. Disabling Eye-Fi Transfer You can set the card to disable Eye-Fi transfer. Choose [Disable] in [Eye-Fi trans.]. z Press the n button to choose [Eye-Fi Settings] from the 3 tab, then press the m button. z Press the op buttons or turn the  dial to choose [Eye-Fi trans.], then press the qr buttons to choose [Disable]. What if [Eye-Fi Settings] does not appear? [Eye-Fi Settings] will not appear when an Eye-Fi card is not inserted in the camera, or when an Eye-Fi card's write-protect tab is in the locked position. For this reason, settings cannot be changed for Eye-Fi cards equipped with a writeprotect tab when the tab is in the locked position. 178