Canon PowerShot SX230 HS PowerShot SX230 HS / SX220 HS Camera User Guide - Page 95
Shooting with Servo AF
View all Canon PowerShot SX230 HS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
Shooting with Servo AF What if the display does not magnify? The display will not appear magnified in [Face Detect] if a face cannot be detected or is too big in relation to the screen. In [Center], it will not appear magnified if the camera cannot focus. The magnified display will not appear when using the digital zoom (p. 55), digital tele-converter (p. 56), Tracking AF (p. 92), Servo AF (see below) or when using a TV as a display (p. 101). Shooting with Servo AF While the shutter button is pressed halfway, the focus and exposure will continue to adjust, allowing you to take pictures of moving subjects without missing a shot. Choose [Servo AF]. z Press the n button to choose [Servo AF] from the 4 tab, then press the qr buttons to choose [On]. Focus. z The focus and exposure will be maintained where the blue AF frame appears while you press the shutter button halfway. • The camera may not be able to focus in some conditions. • In low light conditions, AF frames may not turn blue even after pressing the shutter button halfway. In this case, you can set the focus and exposure with the AF frame setting. • If a correct exposure cannot be obtained, the shutter speed and aperture value appear in orange. Release your finger from the shutter button, then press it again halfway. • You cannot shoot with the AF lock in this mode. • The [AF-Point Zoom] option in the 4 tab is not available in Servo AF mode. • Not available when using the self-timer (p. 58). 95