Canon PowerShot SX260 HS PowerShot SX260 HS / SX240 HS Camera User Guide - Page 131

Shooting Range and Focusing • [Servo AF] (see below) is set to [On] and cannot be changed. • Tracking may not be possible when subjects are too small or move too rapidly, or when subject color or brightness matches that of the background too closely. • [AF-Point Zoom] on the 4 tab is not available. • e is not available. • The camera can detect subjects even if you press the shutter button halfway without pressing the q button. After your shot, is displayed in the center of the screen. • When shooting in f mode (p. 125), press and hold the q button for at least one second. • If [Face ID] is set to [On], names will not display when registered people are detected, but the names will be recorded in the still images (p. 148). However, a name will display if the subject chosen to focus on is the same as a person detected with Face ID. Still Images Shooting with Servo AF This mode helps avoid missing shots of subjects in motion, because the camera continues to focus on the subject and adjust the exposure as long as you press the shutter button halfway. Configure the setting. z Press the n button, choose [Servo AF] on the 4 tab, and then choose [On] (p. 40). Focus. z The focus and exposure are maintained where the blue AF frame is displayed while you are pressing the shutter button halfway. 131