Canon PowerShot SX260 HS PowerShot SX260 HS / SX240 HS Camera User Guide - Page 143
Adjusting the Flash Output
View all Canon PowerShot SX260 HS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 143 highlights
Specific Shutter Speeds and Aperture Values (M Mode) • D: Manual • Calculation of standard exposure is based on the specified metering method (p. 117). Adjusting the Flash Output Choose from the three flash levels in D mode. Enter D mode. z Set the mode dial to D. Configure the setting. z Press the m button, choose X in the menu, and adjust the setting by either pressing the op buttons or turning the 5 dial (p. 39). • You can also set the flash level by accessing n (p. 40) and choosing [Flash Output] in [Flash Settings] on the 4 tab. • You can set the flash level in M or B mode by accessing n (p. 40), choosing [Flash Settings] on the 4 tab, and then setting [Flash Mode] to [Manual]. • You can also access the [Flash Settings] n screen as follows. - When the flash is up, press the r button and immediately press the n button. 143