Canon PowerShot SX260 HS PowerShot SX260 HS / SX240 HS Camera User Guide - Page 15
Inserting the Battery and Memory Card - green
View all Canon PowerShot SX260 HS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
CB-2LY CB-2LYE Initial Preparations Charge the battery. z For CB-2LY: Flip out the plug ( ) and plug the charger into a power outlet ( ). z For CB-2LYE: Plug the power cord into the charger, then plug the other end into a power outlet. X The charging lamp turns orange and charging begins. X When the charging is finished, the lamp turns green. Remove the battery. z After unplugging the battery charger, remove the battery by pushing it in ( ) and up ( ). • To protect the battery and keep it in optimal condition, do not charge it continuously for more than 24 hours. • For battery chargers that use a power cord, do not attach the charger or cord to other objects. Doing so could result in malfunction or damage to the product. • For details on charging time and the number of shots and recording time possible with a fully charged battery, see "Specifications" in the Getting Started guide. Inserting the Battery and Memory Card Insert the included battery and a memory card (sold separately). Note that before using a new memory card (or a memory card formatted in another device), you should format the memory card with this camera (p. 185). Check the card's write-protect tab. z Recording is not possible on memory cards with a write-protect tab when the tab is in the locked (downward) position. Slide the tab up until it clicks into the unlocked position. 15