Canon PowerShot SX260 HS PowerShot SX260 HS / SX240 HS Camera User Guide - Page 98
Using the Wink Self-Timer - pictures
View all Canon PowerShot SX260 HS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
Specific Scenes Using the Wink Self-Timer Aim the camera at a person and press the shutter button all the way down. The camera will shoot about two seconds after a wink is detected. Choose . z Follow steps 1 - 2 on p. 93 and choose , and then press the l button. z Press the qr buttons or turn the 5 dial to choose , and then press the l button. Compose the shot and press the shutter button halfway. z Make sure a green frame is displayed around the face of the person who will wink. Press the shutter button all the way down. X The camera now enters shooting standby mode, and [Wink to take picture] is displayed. X The lamp blinks and the self-timer sound is played. Face the camera and wink. X The camera will shoot about two seconds after detecting a wink by the person whose face is inside the frame. z To cancel shooting after you have triggered the self-timer, press the n button. • If the wink is not detected, wink again slowly and deliberately. • Winking may not be detected if eyes are obscured by hair, a hat, or glasses. • Closing and opening both eyes at once will also be detected as a wink. • If winking is not detected, the camera will shoot about 15 seconds later. • To change the number of shots, press the op buttons after choosing in step 1. [Blink Detection] (p. 86) is only available for the final shot. • If no one is in the shooting area when the shutter button is pressed all the way down, the camera will shoot after a person enters the shooting area and winks. 98