Canon PowerShot SX40 HS PowerShot SX40 HS Camera User Guide - Page 140
Trimming
View all Canon PowerShot SX40 HS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 140 highlights
Trimming You can cut out a portion of a recorded image and save it as a new image file. Trimming Area Trimming Area Display Recorded pixels after trimming Choose [Trimming]. z Press the n button to choose [Trimming] in the 1 tab, then press the m button. Choose an image. z Press the qr buttons or turn the 5 dial to choose an image, then press the m button. Adjust the trimming area. X A frame will appear around the portion of the image to be trimmed. X The original image will display in the upper left and the trimmed image will display in the lower right. z Move the zoom lever to change the frame size. z Press the opqr buttons to move the frame. z Press the l button to change the frame orientation. z In an image with detected faces, gray frames appear around the faces located in the upper left image. The frames can be used for trimming. You can switch between frames by turning the 5 dial. z Press the m button. Save as a new image and display. z Follow Steps 4 and 5 on p. 139. • Images recorded at a pixel setting of (p. 57), or images resized to (p. 139) cannot be edited. • Images that can be trimmed will have the same width and height ratio after trimming. • The number of recorded pixels in a trimmed image will be smaller than before trimming. • Movies cannot be edited. 140