Canon PowerShot SX50 HS User Guide - Page 228

Using Optional Accessories 3 Choose shooting mode , , , or . zzFlash settings can only be configured in these modes. In other modes, the flash is adjusted and fired automatically, as needed. 4 Set the white balance to [h] (= 122). 5 Configure the external flash. zzPress the button, choose [Flash Control] on the [4] tab, and then press the button. XXOptions already set on the flash itself are displayed. zzPress the buttons or turn the dial to choose an item, and then adjust the setting by pressing the buttons. zzAvailable settings vary depending on the shooting mode and the flash attached (= 229). • Settings for the built-in flash cannot be configured while a Speedlite EX series flash is attached, because that setting screen is no longer accessible. • You can also access the setting screen by pressing the button for at least one second. • Flash settings in [ ] shooting mode can be configured just as they are in mode. • 580EX II only: [Flash Control] is not available if the external flash has been set up for stroboscopic flash. • 320EX only: Auto LED lighting is only available in low-light movie recording or in Movie mode. In this case, the [ ] icon is shown. 228