Canon RP10 for CR-120/150 RP10 User Guide
Canon RP10 for CR-120/150 Manual
 |
View all Canon RP10 for CR-120/150 manuals
Add to My Manuals
Save this manual to your list of manuals |
Canon RP10 for CR-120/150 manual content summary:
- Canon RP10 for CR-120/150 | RP10 User Guide - Page 1
RP10 User Manual Please read this manual before operating this printer. - Canon RP10 for CR-120/150 | RP10 User Guide - Page 2
and used in accordance with the instructions, may cause harmful interference to or modifications to the equipment unless otherwise specified in the manual. If such changes or modifications should be made, you scheme or your household waste disposal service. For more information regarding return and - Canon RP10 for CR-120/150 | RP10 User Guide - Page 3
Für EMVG Dieses Produkt ist zum Gebrauch im Wohnbereich, Geschäfts-und Gewerbebereich sowie in Kleinbetrieben vorgesehen. Model Names The following name may be provided for the safety regulations in each sales region of the Thermal Receipt Printer. RP10: Model 6830010 Reproduction Warning This - Canon RP10 for CR-120/150 | RP10 User Guide - Page 4
receipt printer that supports high speed printing troubleshooting, etc. User Manual is included as a PDF file on the CD-ROM*. You need Acrobat Reader to view the manual Manual The following symbols are used in this manual to explain procedures, restrictions, handling precautions, and instructions - Canon RP10 for CR-120/150 | RP10 User Guide - Page 5
for the RP10 4 Symbols Used in This Manual 4 Important Safety Instructions 6 Handling 6 Installation Location 7 Power Supply 8 Moving of Time 24 Troubleshooting 25 When the Printer is Not Recognized 25 Feeding Trouble 25 Printing Trouble 25 Software Installation Trouble 26 Appendix 27 - Canon RP10 for CR-120/150 | RP10 User Guide - Page 6
Important Safety Instructions Handling WARNING ■ Never install and operate the printer near flammable cord from the power outlet. Contact your local authorized Canon dealer or service representative to have the printer serviced. ■ Note that when using the printer in an environment where temperature - Canon RP10 for CR-120/150 | RP10 User Guide - Page 7
Installation Location For operation, maintenance, and ventilation, make sure that there is enough space around the printer, as shown in the illustration below. 100 mm (3.9") 100 mm (3.9") 100 mm (3.9") When installing the Check Reader CR-150/CR-120 on top of the printer, make sure that the paper - Canon RP10 for CR-120/150 | RP10 User Guide - Page 8
the current requirements of the printer. • If you are unsure of anything relating to the power supply, contact your local authorized Canon dealer or service representative for further information. • Never place an object on top of the power cord or step on the power cord. • Never bundle the power - Canon RP10 for CR-120/150 | RP10 User Guide - Page 9
everything shown below. Check every item you have removed from the box. If any items are missing, contact your local authorized dealer. Setup Guide Power Cord*1 RP10 Warranty Card*2 USB Cable Disc*3 *1 The power cord varies, according to the country of purchase. *2 For the United States and - Canon RP10 for CR-120/150 | RP10 User Guide - Page 10
Part Names Front View Thermal Head This applies prints paper. Paper Sensor This sensor detects the status of paper. Platen Roller To feed paper. Warning Label This shows warning when using printer. Paper Output Section Status LED Displays status of the printer. Paper Cover Cover Open Lever To - Canon RP10 for CR-120/150 | RP10 User Guide - Page 11
Exterior Dimensions Units: millimeters (units in parenthesis are inches) 370 mm (14.6") (with the Paper Cover open) Status LED The Status LED on the front of the printer shows the status of the printer. The colors and patterns of the light indicate the following. Ready state: Lit green No paper: - Canon RP10 for CR-120/150 | RP10 User Guide - Page 12
the RP10 is available on the website. For the latest software support information, go to the Products page on the Canon website. downloaded software. The installation screen appears. D Follow the on-screen instructions to install the driver. Once the installation is complete, "RP10 Configuration" - Canon RP10 for CR-120/150 | RP10 User Guide - Page 13
or is lit red even when the paper is properly loaded, there is a problem with the printer. Turn OFF the power, and contact your local authorized Canon dealer or service representative to have the printer serviced. WARNING If you hear strange sounds, detect smoke or abnormal heat, sense a vibration - Canon RP10 for CR-120/150 | RP10 User Guide - Page 14
Turning OFF the Power Press and hold the Power Button to turn off the power. CAUTION For your safety, disconnect the power plug from the power outlet if you are not using the printer for a long period of time. NOTE The printer will turn off automatically if 4 hours elapse without printing being - Canon RP10 for CR-120/150 | RP10 User Guide - Page 15
• Use paper that is not deformed or loosened, as shown below. Normal Deformed paper (pushed down) Loading Paper A Press the Power Button to turn ON the power. B Push the Cover Open Lever down to open the Paper Cover. IMPORTANT Be careful not to apply excessive force to the Paper Cover. Doing so - Canon RP10 for CR-120/150 | RP10 User Guide - Page 16
D Slightly pull the edge of paper, and then close the Paper Cover while pulling the paper forward so that the paper will not be loosened. The Status LED is lit green, and the printer is ready to print. IMPORTANT • Make sure to close the Paper Cover completely by pushing the protrusion in its center - Canon RP10 for CR-120/150 | RP10 User Guide - Page 17
. IMPORTANT • Be sure to Log On as the Administrator. • The procedure in Windows 8.1/10 is different from the ones described in this manual. Refer to the Windows 8.1/10 "Help and Support Center" to select [Run]. [COM Port] Select the COM port that you want to use. [Paper Type] Select the type of - Canon RP10 for CR-120/150 | RP10 User Guide - Page 18
[View devices and printers] under [Hardware and Sound]. IMPORTANT The procedure in Windows 8.1/10 is different from the ones described in this manual. Paper/Output Specify the paper size and number of copies. Document Options Specify the halftone. Print settings [Quality] Select paper that you - Canon RP10 for CR-120/150 | RP10 User Guide - Page 19
[Standard Energy] Specify the print density in the range of 0 to 127. Lower values will result in lighter prints, while higher values will result in darker prints. NOTE The default value for [Standard Energy] differs depending on the [Quality] setting. If the [Quality] setting is changed and then - Canon RP10 for CR-120/150 | RP10 User Guide - Page 20
Cautions When Printing • Do not touch or pull paper during printing. Printing may not be performed properly, or paper jams may occur inside the printer. • Do not cover the paper output section during printing. Doing so may result in paper jams. • Do not apply external impact during printing. Doing - Canon RP10 for CR-120/150 | RP10 User Guide - Page 21
Maintenance This chapter describes to clean and maintain the printer. Daily Cleaning To ensure high-quality printing, regularly clean your RP10 as described below. About Cleaning Frequency It is recommended that you clean the printer at regular intervals However, if paper chips, foreign substances, - Canon RP10 for CR-120/150 | RP10 User Guide - Page 22
Thermal Head When using the printer with paper chips, foreign substances, or hand fats adhering to the thermal printhead, the function of the thermal printhead or Platen Roller may be deteriorated. If they adhere to the thermal printhead, follow the steps below to clean it. CAUTION Do not touch the - Canon RP10 for CR-120/150 | RP10 User Guide - Page 23
that the printer is functioning properly. Platen Roller If foreign substances such as paper chips adhere to the Platen Roller, paper feed or print quality problems may occur. If they adhere to the Platen Roller, follow the steps below to clean it. IMPORTANT • Do not wipe off the yellow grease - Canon RP10 for CR-120/150 | RP10 User Guide - Page 24
outside of the paper output section, and close the Paper Cover. D Turn ON the printer. If the Status LED is lit red, there may be a problem with the cutter. E Press the Paper Cutter Button to cut off the creased portion. Removing Paper Jammed in the Auto Cutter Section A Push the Cover - Canon RP10 for CR-120/150 | RP10 User Guide - Page 25
Troubleshooting When the Printer is Not Recognized The following causes and the printer. USB hub is not compatible with the printer. Remove the USB hub to use the printer. Feeding Trouble Cause Remedy Paper is not fed. A paper jam occurs. - Check that paper is loaded in the printer properly - Canon RP10 for CR-120/150 | RP10 User Guide - Page 26
type of paper with a feed shaft. Ribs Software Installation Trouble Cause Remedy The "Invalid Argument" message appeared during software installation [Service] in the [Administrative Tools] screen. 4. Double-click [Print Spooler] in the [Service] screen. 5. If [Startup type] is set to [Manual] - Canon RP10 for CR-120/150 | RP10 User Guide - Page 27
Appendix About Preprinted Paper When preprinting paper with the mark for position detection or a logo, note the following precautions. About Mark For Position Detection Print the mark for position detection on the heat-sensitive side of paper, as shown in the illustration below. The mark size - Canon RP10 for CR-120/150 | RP10 User Guide - Page 28
Others • When using a UV lamp frequently, take extra care about paper shrinking due to heat (in the feeding/sub-feeding (paper width) directions), or about color fogging. • The paper surface is slippery. Apply slightly stronger drive roller pressing force. • If you want a higher PCS value for the - Canon RP10 for CR-120/150 | RP10 User Guide - Page 29
Safety-related markings on the machine Marquages de sécurité sur la machine Marcature di sicurezza sulla macchina Sicherheitshinweise auf der Maschine Marcas de la máquina relacionadas con la seguridad Veiligheidsmarkeringen op de machine Makine üzerindeki güvenlik i㶆aretleri [English] [Français] [ - Canon RP10 for CR-120/150 | RP10 User Guide - Page 30
[English] [Français] [Italiano] [Deutsch] [Español] [Nederlands] [Türkçe] Switch (Push-On/Push-Off) Commutateur (Appuyer pour mettre en marche/Appuyer pour arrêter) Interruttore a pulsante bistabile (On/Off) Schalter (Ein- und Ausschalten durch Drücken) Interruptor (pulsado para encendido/apagado) - Canon RP10 for CR-120/150 | RP10 User Guide - Page 31
[English] [Français] [Italiano] [Deutsch] [Español] [Nederlands] [Türkçe] DC symbol Indicates direct current Symbole CC Indique qu'il s'agit de courant continu Simbolo corrente continua (C.C.) Indica la corrente continua Gleichstrom-Symbol Kennzeichnet Gleichstrom Símbolo CC Indica - Canon RP10 for CR-120/150 | RP10 User Guide - Page 32
CANON ELECTRONICS INC. 3-5-10 SHIBAKOEN, MINATO-KU, TOKYO 105-0011, JAPAN CANON U.S.A. INC. ONE CANON PARK, MELVILLE, NY 11747, U.S.A. CANON CANADA INC. 8000 MISSISSAUGA ROAD, BRAMPTON, ONTARIO L6Y 5Z7, CANADA CANON EUROPA N.V. BOVENKERKERWEG 59, 1185 XB AMSTELVEEN, THE NETHERLANDS CANON AUSTRALIA
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
 |
 |
Please read this manual before operating this printer.
User Manual
RP10