Canon RP10 for CR-120/150 CR-120/150 User Guide

Canon RP10 for CR-120/150 Manual

Get Canon RP10 for CR-120/150 PDF manuals and user guides View all Canon RP10 for CR-120/150 manuals
Add to My Manuals
Save this manual to your list of manuals

Canon RP10 for CR-120/150 manual content summary:

  • Canon RP10 for CR-120/150 | CR-120/150 User Guide - Page 1
    User Manual Please read this manual before operating this scanner.
  • Canon RP10 for CR-120/150 | CR-120/150 User Guide - Page 2
    and used in accordance with the instructions, may cause harmful interference to radio service. For more information regarding return and recycling of WEEE products, please visit www.canon- CR-150: Model M112010/M112030 CR-150N: Model M112020 CR-120: Model M112040/M112060 CR-120N: Model M112050 CR-
  • Canon RP10 for CR-120/150 | CR-120/150 User Guide - Page 3
    Inc. in the United States and may also be trademarks or registered trademarks in other countries. • imageFORMULA is a trademark of CANON ELECTRONICS INC. • Microsoft, Windows, Windows 7, Windows 8.1 and Windows 10 are registered trademarks or trademarks of Microsoft Corporation in the United States
  • Canon RP10 for CR-120/150 | CR-120/150 User Guide - Page 4
    you have removed from the box. If any items are missing, contact your local authorized Canon dealer. Disc AC Adapter CR-150/CR-120 Card Guard Power Cord*1 Warranty Card*2 USB Cable Setup & Operation Guide *1 The power cord varies, according to the country of purchase. *2 For the United States
  • Canon RP10 for CR-120/150 | CR-120/150 User Guide - Page 5
    Use This chapter describes how to prepare the scanner to scan documents. Setting Up the Scanner Perform the following steps to set up the CR-150/CR-120. Refer to the section for each step for details about that step. A Check your operating environment. (See "Checking Your Operating Environment" on
  • Canon RP10 for CR-120/150 | CR-120/150 User Guide - Page 6
    computer system requirements are recommended for using the CR-150/CR-120. Operating Systems: • Microsoft Windows 7 (32/64bit) SP1 or later • Microsoft Windows 8.1 (32/64bit) • Microsoft Windows 10 (32/64bit) • Microsoft Windows Server 2008 R2 Service Pack 1 or later • Microsoft Windows Server 2012
  • Canon RP10 for CR-120/150 | CR-120/150 User Guide - Page 7
    For the latest software support information, go to the Products page on the Canon website. ISIS / TWAIN / Canon Driver The ISIS/ CR-150/CR-120 to the computer. • Some functions mentioned in this manual may not be operated in some applications. Installing the Scanning Utility Follow the instructions
  • Canon RP10 for CR-120/150 | CR-120/150 User Guide - Page 8
    , see p. 23. • *This USB port can only be used when connected to the network. • *USB Port (CR-150N/120N only) The scanner can be connected to a dedicated port of an optional device. Refer to the manual of the optional device for details. NOTE Connect the type B plug (square) to the scanner and
  • Canon RP10 for CR-120/150 | CR-120/150 User Guide - Page 9
    Wired LAN Connection Ethernet connection (CR-150N/120N only) Allows the use of this scanner such as routers vary depending on the environment in which they are being used. Refer to the manual of the network device for details. WARNING When connecting the power cord, follow these precautions. Failure
  • Canon RP10 for CR-120/150 | CR-120/150 User Guide - Page 10
    The CR-150/CR-120 will be registered as "CANON CR-150 USB" or "CANON CR-120 USB" in the Imaging Device directory. When you turn ON the power, the Power Button flashes slowly and then turns solid blue. IMPORTANT If the scanner does not work, or the power LED continues to flash, there is a problem
  • Canon RP10 for CR-120/150 | CR-120/150 User Guide - Page 11
    Turning OFF the Power A Press and hold the Power Button to turn off the power. CAUTION For your safety, disconnect the power plug from the power outlet if you are not using the scanner for a long period of time. NOTE The scanner's auto power off setting is enabled by default, and the scanner will
  • Canon RP10 for CR-120/150 | CR-120/150 User Guide - Page 12
    Guide. For details on the CR-150/CR-120, refer to the User Manual (electronic manual). User Manual (Electronic Manual): This Manual Describes how to use the scanner, and includes instructions for configuring the scanner settings, as well as handling, maintenance, and troubleshooting information
  • Canon RP10 for CR-120/150 | CR-120/150 User Guide - Page 13
    Manuals for the CR-150/CR-120 12 Symbols Used in This Manual 12 Important Safety Instructions 15 Handling 15 Installation Location 16 Power Supply 17 Moving the Scanner 18 Introduction to the CR-150/CR-120 19 Features of the CR-150/CR Settings (CR-150N/120N only 34 imageFORMULA Utility 34
  • Canon RP10 for CR-120/150 | CR-120/150 User Guide - Page 14
    Troubleshooting 58 When the Scanner Is Not Recognized 58 Network Trouble 58 Clearing Paper Jams 59 Feeding Trouble 61 When the Scanned Image Is Not Normal 63 ...64 Maintenance 64 Daily Cleaning 64 Cleaning the Main Unit 64 Cleaning the Feed Path 64
  • Canon RP10 for CR-120/150 | CR-120/150 User Guide - Page 15
    Important Safety Instructions Handling WARNING ■ Never install and operate the scanner near flammable substances the power cord from the power outlet. Contact your local authorized Canon dealer or service representative to have the scanner serviced. ■ Before you move the scanner, always turn OFF the
  • Canon RP10 for CR-120/150 | CR-120/150 User Guide - Page 16
    ■ When you remove the power cord, grip it by the power plug head. Never attempt to disconnect the power cord from the power outlet by pulling on the power cord. Doing so may damage or expose the cord's internal wiring, and cause a fire or electrical shock. ■ Keep the area around the power outlet
  • Canon RP10 for CR-120/150 | CR-120/150 User Guide - Page 17
    is rated for the current requirements of the scanner. • If you are unsure of anything relating to the power supply, contact your local authorized Canon dealer or service representative for further information. • Never place an object on top of the power cord or step on the power cord. • Never bundle
  • Canon RP10 for CR-120/150 | CR-120/150 User Guide - Page 18
    Moving the Scanner When you move the CR-150/CR-120, hold it firmly with both hands and carry it carefully. Do not hold the scanner by the eject stopper or the Card Guard. The
  • Canon RP10 for CR-120/150 | CR-120/150 User Guide - Page 19
    of parts on the scanner. Features of the CR-150/CR-120 The Canon Check Reader CR-150/CR-120 is a scanner with magnetic heads that can mm (5.98" x 2.76")) CR-150: 150 cpm CR-150N: 150 cpm CR-120: 120 cpm CR-120N: 120 cpm CR-120 UV: 120 cpm (UV Scan mode) Supports Large Documents Documents up to
  • Canon RP10 for CR-120/150 | CR-120/150 User Guide - Page 20
    Drop-Out Color This function enables drop-out scanning of a specific color in the document. Imprinter Is Standard Equipment An imprinter mechanism, which prints text (5 lines) or a bitmap on documents as they are scanned, comes standard equipped with the scanner. The imprinter's ink cartridge is not
  • Canon RP10 for CR-120/150 | CR-120/150 User Guide - Page 21
    off the power. Function Button You can assign this button to any function from an application. When using the accompanying Scanning Utility for CR-120/CR-150, switches the double feed detection ON/OFF. Start Button Starts scanning operations. Press and hold this button during a paper jam to eject
  • Canon RP10 for CR-120/150 | CR-120/150 User Guide - Page 22
    Scanner Unit This unit scans the documents. Built-in Nozzle Cleaning Unit Eject Pocket Card Slot Eject Stopper Pull out the Eject Stopper to prevent documents from falling off the output tray. Document Feed/Eject Tray Document Feeder Adjustment Dial Cover Ultrasonic Sensor When this sensor detects
  • Canon RP10 for CR-120/150 | CR-120/150 User Guide - Page 23
    this connector to connect the scanner to a computer. (See "USB Connections," on p. 8.) USB Port (CR-150N/120N only) The scanner can be connected to a dedicated port of an optional device. Refer to the manual of the optional device for details. CAUTION To avoid overheating and causing a fire, never
  • Canon RP10 for CR-120/150 | CR-120/150 User Guide - Page 24
    Exterior Dimensions Units: millimeters (units in parenthesis are inches) 360.4 mm (14.2") (with the eject stopper open) 298.5 mm (11.8") 238.2 mm (9.4") 56 mm (2.2") Remove and attach the Eject Stopper The Eject Stopper can be extended or removed as shown in the figure. Adjust the stopper in
  • Canon RP10 for CR-120/150 | CR-120/150 User Guide - Page 25
    not included with the scanner. Purchase an ink cartridge separately, as shown below. Compatible ink cartridges: Region North America/ South America EU Asia/ Oceania Canon Ink Cartridge PG-145/ 145XL, 245/ 245XL PG-445/ 445XL, 545/ 545XL PG-645/ 645XL, 745/ 745XL A Remove the Top Cover. B When you
  • Canon RP10 for CR-120/150 | CR-120/150 User Guide - Page 26
    C Remove the ink cartridge from its bag. Ink Jet Nozzle Tag Contacts IMPORTANT Do not touch the ink cartridge contacts. This can cause a bad electrical contact and reduced print quality. D Grasp the tag and then peel off the tape covering the ink jet nozzle. E Place the ink cartridge shown in the
  • Canon RP10 for CR-120/150 | CR-120/150 User Guide - Page 27
    F Push the ink cartridge in the direction of the arrow until it clicks into place. IMPORTANT Make sure that the ink cartridge is securely in place. G Close the Nozzle cleaning Unit. H Carefully replace the Top Cover. 27
  • Canon RP10 for CR-120/150 | CR-120/150 User Guide - Page 28
    Utility A Click the Start button, and then click [All Programs]. The procedure in Windows 8.1/10 is different from the ones described in this manual. Refer to the Windows 8.1/10 "Help and Support Center" to select [Run]. B Click [Scanning Utility for CR-120&150]. C Start the Scanning Utility. 28
  • Canon RP10 for CR-120/150 | CR-120/150 User Guide - Page 29
    NOTE The basic operation of the Scanning Utility is noted in the Scanning Utility help file. On the [Help] menu, click [Help] to view the explanation. IMPORTANT Confirm that your scanner is correctly connected to the computer, and that the scanner and computer are both turned on. B Select a
  • Canon RP10 for CR-120/150 | CR-120/150 User Guide - Page 30
    Scanning Methods A Select [Scanner Setting] from the [File] menu. NOTE For information about the settings for the scan conditions, click [Help] on the Settings dialog box to open the Help file. C Select the scanning method from the [File] menu and start scanning. The Settings dialog box appears. B
  • Canon RP10 for CR-120/150 | CR-120/150 User Guide - Page 31
    , and start Windows. IMPORTANT Be sure to Log On as the administrator. B Download usable software from the Canon Website. After executing the downloaded file, follow the instructions on the screen to complete the installation. IMPORTANT • The displayed screen, type, file name, and folder name
  • Canon RP10 for CR-120/150 | CR-120/150 User Guide - Page 32
    sure to Log On as the Administrator. • The procedure in Windows 8.1/10 is different from the ones described in this manual. Refer to the Windows 8.1/10 "Help and Support Center" to uninstall the software. A Click the Start button, and then click [Control Panel]. B Click [Uninstall a program]. The
  • Canon RP10 for CR-120/150 | CR-120/150 User Guide - Page 33
    Driver for CR-120/CR-150." • If you uninstall the Ranger, select the "Ranger for CR-120/CR-150." D The Confirm File Deletion dialog box appears. If you selected "Canon Driver for CR-120/CR-150," the above dialog box appears. E Click [Yes], and the uninstaller starts. Follow the instructions on the
  • Canon RP10 for CR-120/150 | CR-120/150 User Guide - Page 34
    ) assigned to all network devices (hardware). A Click the Start button, and then click [All Programs], [Canon CR-150] or [Canon CR-120], and [Canon imageFORMULA Utility]. imageFORMULA Utility starts. B Click [CANON CR-150 (or CR-120) USB] and click [Properties]. Scanner properties are displayed
  • Canon RP10 for CR-120/150 | CR-120/150 User Guide - Page 35
    [Scanner Name] Set an original name for the scanner so that it can be correctly identified on the network. NOTE • Scanner Name must be 1 to 15 characters in length. The following arbitrary characters can be entered. Numerals: 0 to 9* Alphabetic characters: A to Z , a to z and hyphen (-) * * The
  • Canon RP10 for CR-120/150 | CR-120/150 User Guide - Page 36
    scanner and the computer are connected via USB. IMPORTANT Log On to Windows as an Administrator. A Click the Start button, and then click [All Programs], [Canon CR-150] or [Canon CR-120], and [Canon imageFORMULA Utility]. imageFORMULA Utility starts. 36
  • Canon RP10 for CR-120/150 | CR-120/150 User Guide - Page 37
    B Click [CANON CR-150 (or CR-120) USB] and click [Properties]. Scanner properties are displayed. How to import the SSL Server certificate file You can import the SSL server certificate to
  • Canon RP10 for CR-120/150 | CR-120/150 User Guide - Page 38
    B When the [Import Certificate] screen is displayed click [Browse]. D Enter the password. C The Import screen will display. Select the SSL server certificate file (xxxx.pfx) from the displayed list, and then click [Open]. NOTE Password must be 1 to 128 characters in length. IMPORTANT Make sure
  • Canon RP10 for CR-120/150 | CR-120/150 User Guide - Page 39
    . B When the [Login] screen is displayed, enter the admin password and click [Login]. NOTE For details on the admin password, see "imageFORMULA Utility [Password Setting]" on p. 35. C The Home screen is displayed. [Scanner Name Setting] [Scanner Name Setting] screen is displayed. [Network Setting
  • Canon RP10 for CR-120/150 | CR-120/150 User Guide - Page 40
    [Maintenance Setting] [Maintenance Setting] screen is displayed. [Scanner Name Setting] A • When searching for scanners on the network to select a scanner with Scanning Utility, the Scanner Name is displayed here. For details, see "How to Use the Scanning Utility" on p. 28 [Network Setting] A B C D
  • Canon RP10 for CR-120/150 | CR-120/150 User Guide - Page 41
    [mDNS Setting] A B [mDNS] A Check (ON) to automatically search scanners. NOTE If not checked (OFF), enter the IP address of the scanner when selecting a scanner in Scanning Utility. [OK] B Click [OK] to send settings to the scanner. [MAC Address Filtering] A B C [MAC Address Filtering] A Check (ON)
  • Canon RP10 for CR-120/150 | CR-120/150 User Guide - Page 42
    [Password Setting] A B C [Maintenance Setting] A B D The admin password for logging into "WEB MENU" can be set and changed. [Current Password] A Enter the current admin password. [New Password] B Enter the new password. [New Password(Confirmation)] C Enter the new password again for confirmation.
  • Canon RP10 for CR-120/150 | CR-120/150 User Guide - Page 43
    DHCP IP Address Subnet Mask Default Gateway Password Setting MAC Address Filtering mDNS The first two characters are displayed as "CR" and the "CR" is followed by "MAC Address". EX. CR112233445566 "112233445566" is the examples of MAC Address. ON --- --- --- canoncr150 OFF ON [Import] B Import
  • Canon RP10 for CR-120/150 | CR-120/150 User Guide - Page 44
    B When the [Import certificate] screen is displayed click [Browse]. D Enter the password. C The Import screen will display. Select the SSL server certificate file (xxxx.pfx) from the displayed list, and then click [Open]. NOTE Password must be 1 to 128 characters in length. IMPORTANT Make sure
  • Canon RP10 for CR-120/150 | CR-120/150 User Guide - Page 45
    E Click [Send]. The import of the SSL server certificate to the scanner will start. How to check the version information You can check the version information of the scanner. A Click button while the Home screen is displayed. see "How to open the WEB MENU and Log On" on p. 39 IMPORTANT Import will
  • Canon RP10 for CR-120/150 | CR-120/150 User Guide - Page 46
    B Version information is on page. 3. A B [Version] A The scanner's device version information is displayed. [No.] B The serial number of the scanner is displayed. 46
  • Canon RP10 for CR-120/150 | CR-120/150 User Guide - Page 47
    of documents that can be used and how to place them. CAUTION Treat the documents carefully. The paper edges may cut your fingers. Document The CR-150/CR-120 can feed a wide variety of document sizes. The ranges of height and length for a document are: Height : 60 to 108 mm (2.4" to 4.3") Length : 90
  • Canon RP10 for CR-120/150 | CR-120/150 User Guide - Page 48
    Wrinkled or creased paper Curled paper Carbon backed paper Coated paper or fax recording paper Torn paper Extremely thin paper Paper with clips or staples Paper with binding holes NOTE • Note that mixing documents of different thickness may cause a malfunction during feeding. • Curled,
  • Canon RP10 for CR-120/150 | CR-120/150 User Guide - Page 49
    same time. If false detections happen too often, disable the double feed detection function. NOTE When Using the Accompanying Scanning Utility for CR-120/CR-150: You can disable the double feed detection function to push the Function Button. When the function is disabled, the light of the Function
  • Canon RP10 for CR-120/150 | CR-120/150 User Guide - Page 50
    scanning to start from the software application. NOTE • When Using the Accompanying Scanning Utility for CR-120/CR-150: There are three scanning methods as follows. Follow the each instruction. Scan 1 page Click [Scan Page] from the [File] menu. Scan Batch to File A Click [Scan Batch to File
  • Canon RP10 for CR-120/150 | CR-120/150 User Guide - Page 51
    Scan Batch to Printer A Click [Scan Batch to Printer] from the [File] menu. B Select Simplex or Duplex, and then click [Start Scanning]. • You can also start scanning with pressing the Start Button. F Scanning starts. When printing with the imprinter, ink may get on the leading edge of the document
  • Canon RP10 for CR-120/150 | CR-120/150 User Guide - Page 52
    Loading cards About the Card Guard When scanning plastic cards, use of card guard is recommended. Attach the card guard to the back of the unit (Rear Card Slot) as shown in the figure below. A Orient the front side of the card toward the left, and insert the card straight into the card slot. B
  • Canon RP10 for CR-120/150 | CR-120/150 User Guide - Page 53
    CAUTION • Keep the area around the rear card slot clear of objects. • When you want to insert a card in the card slot, remove any documents from the feed tray. • Embossed cards may not be scanned correctly, depending on the type of embossment. C After a plastic card is scanned, it is ejected into
  • Canon RP10 for CR-120/150 | CR-120/150 User Guide - Page 54
    as an Administrator. A Click the Start button, and then click [All Programs], [CANON CR-150] or [CANON CR-120], and [Canon imageFORMULA Utility]. imageFORMULA Utility starts. B Click [CANON CR-150(or CR-120) USB] and click [Properties]. Scanner properties are displayed. IMPORTANT For duplicate
  • Canon RP10 for CR-120/150 | CR-120/150 User Guide - Page 55
    C Select or clear the [Turn off automatically after 4 hours] check box. Example (CR-150/120/120UV): Example (CR-150N/120N): D Click [OK] to close the scanner properties. 55
  • Canon RP10 for CR-120/150 | CR-120/150 User Guide - Page 56
    On to Windows as an Administrator. A Click the Start button, and then click [All Programs], [CANON CR-150] or [CANON CR-120], and [Canon imageFORMULA Utility]. imageFORMULA Utility starts. B Click [CANON CR-150 USB] and click [Properties]. Scanner properties are displayed. C When [HID] check box is
  • Canon RP10 for CR-120/150 | CR-120/150 User Guide - Page 57
    Example (CR-150N/120N): NOTE The [HID] check box is displayed when you are using a USB connection. D Click [OK] to close the scanner properties. 57
  • Canon RP10 for CR-120/150 | CR-120/150 User Guide - Page 58
    Troubleshooting This chapter describes the problems that might occur in the CR-150/ CR Canon CR-150/CR-120 turns OFF automatically. Remedy Check whether the Auto Power OFF function of the CR-150/ CR-120 is enabled. If it is enabled, disable it. Network Trouble refer to the manual of each device.
  • Canon RP10 for CR-120/150 | CR-120/150 User Guide - Page 59
    and turn it back on again. The "WEB MENU" does not display, or a message saying "This page cannot be displayed" is displayed. Check Canon imageFORMULA Utility and set the correct IP address. Clearing Paper Jams If paper has jammed, open the Maintenance Cover and remove the jammed paper. CAUTION
  • Canon RP10 for CR-120/150 | CR-120/150 User Guide - Page 60
    D Press the Open Button, and push the Left Maintenance Cover open to the left. NOTE If the above procedure does not clear the paper jam, perform the following to remove the jammed document. C Pull the Open Button, and pull the Right Maintenance Cover open to the right. E Remove the paper that has
  • Canon RP10 for CR-120/150 | CR-120/150 User Guide - Page 61
    click. Feeding Trouble If the document is not fed properly or the detection functions do not work properly, remedy the problem by checking the are not replaceable, contact your local authorized Canon dealer or service representative to have the scanner serviced. • The Separation Roller gap is too
  • Canon RP10 for CR-120/150 | CR-120/150 User Guide - Page 62
    local authorized Canon dealer or service representative to have the scanner serviced. • The problem. The imprinter is not printing correctly (missing imprint dots). Ink is clogged in the ink jet nozzle. Clean the ink jet nozzle. Cleaning the ink jet nozzle is recommended before using the CR-150/CR
  • Canon RP10 for CR-120/150 | CR-120/150 User Guide - Page 63
    7. For details on how to install the application, see the applications instruction manual. Memory becomes insufficient and scanning stops. If you configure scanning conditions that do not rectify the problem, contact your local authorized Canon dealer or service representative to have the scanner
  • Canon RP10 for CR-120/150 | CR-120/150 User Guide - Page 64
    Maintenance This chapter describes how to clean and maintain the scanner. Daily Cleaning To ensure high-quality image scanning, regularly clean your CR-150/ CR-120 as described below. CAUTION • Before you clean the scanner, turn OFF the scanner and computer, and disconnect the power cord from the
  • Canon RP10 for CR-120/150 | CR-120/150 User Guide - Page 65
    IMPORTANT If you notice paper dust in the feed path when you open the Maintenance Cover, clean it out with a clean dry cloth or cotton swabs. B Press the Open Button, and push the Left Maintenance Cover open to the left. D Close the Left Maintenance Cover. Make sure that it is completely closed
  • Canon RP10 for CR-120/150 | CR-120/150 User Guide - Page 66
    Cleaning the Scanning Glass and Rollers If stripes appear on scanned images or if dirt appears on scanned documents, clean the scanning glass and rollers. Clean the scanning glass and rollers regularly. A Remove the Top Cover. C Press the Open Button, and push the Left Maintenance Cover open to the
  • Canon RP10 for CR-120/150 | CR-120/150 User Guide - Page 67
    E Spin the rollers while wiping them clean with a firmly wrung cloth dampened with water. There are 14 roller positions, as shown in the diagram below. F Use a clean dry cloth to clean the entire scanning glass. Scanning Glass չ ո շ վ ս ճ պ ջռ ն յ ձ ղ մ G Close the Left Maintenance
  • Canon RP10 for CR-120/150 | CR-120/150 User Guide - Page 68
    rollers need to be changed. Some rollers are replaceable. (See "Replacing the Rollers," on p. 77.) If the rollers are not replaceable, contact your local authorized Canon dealer or service representative to have the scanner
  • Canon RP10 for CR-120/150 | CR-120/150 User Guide - Page 69
    Cleaning the Magnetic Head If the magnetic head is dirty, then MICR characters cannot be scanned correctly. Periodically, clean the magnetic head with a commercially available audio head cleaner. A Pull the Open Button, and pull the Right Maintenance Cover open to the right. B Use a commercially
  • Canon RP10 for CR-120/150 | CR-120/150 User Guide - Page 70
    Cleaning the Ink Jet Nozzles Ink that collects around the ink jet nozzles may stain your documents or cause the text or bitmap to appear as scratched. Clean the area around the ink jet nozzles periodically. Cleaning the ink jet nozzles is also efficient action when the printed text or bitmap becomes
  • Canon RP10 for CR-120/150 | CR-120/150 User Guide - Page 71
    your Canon CR-Series scanner as needed with a cleaning card. Using a cleaning card will minimize the frequent cleaning as instructed in this manual. It in the United States. • Contact your local authorized Canon dealer or service representative for the available cleaning card. Prepare for the
  • Canon RP10 for CR-120/150 | CR-120/150 User Guide - Page 72
    OFF Mode Button C Place the cleaning card (for Check Path Cleaning) in the document tray. NOTE Allow 1 to 2 minutes for the moisture on the Canon CR-Series scanner from the cleaning card to thoroughly dry before scanning documents. Card Path Cleaning Follow the procedures below to perform card path
  • Canon RP10 for CR-120/150 | CR-120/150 User Guide - Page 73
    scanner is extremely dirty, you may need to use another cleaning card. F Turn OFF the scanner. NOTE Allow 1 to 2 minutes for the moisture on the Canon CR-Series scanner from the cleaning card to thoroughly dry before scanning documents. 73
  • Canon RP10 for CR-120/150 | CR-120/150 User Guide - Page 74
    unpacked ink cartridge as soon as possible. More frequent cleaning of the ink cartridge is required if long time elapses after unpacking. NOTE • Use a Canon ink cartridge. (See "About the Ink Cartridge," on p. 25.) • Do not use more than one cartridge by rotation. If you do so, applications cannot
  • Canon RP10 for CR-120/150 | CR-120/150 User Guide - Page 75
    C Push the ink cartridge backward, and then remove the ink cartridge. Replacing the Ink Disposal Tank When the following conditions appear, you have to replace the ink disposal tank according to the following procedure. • When the ink cartridge is replaced. • When clumpy ink appears on the ink
  • Canon RP10 for CR-120/150 | CR-120/150 User Guide - Page 76
    B Remove the ink disposal tank. C Attach the ink disposal tank. Ink Disposal Tank WARNING Do not print without the ink disposal tank. Doing so may cause a malfunction. NOTE • Be careful not to get dirty with ink. • When you discard the ink disposal tank, put it in the plastic bag in the box of
  • Canon RP10 for CR-120/150 | CR-120/150 User Guide - Page 77
    Replacing the Rollers When rollers are worn, paper jams and double feeds tend to occur. You can replace the rollers (Pickup Roller, Feed Roller, and Separation Roller) according to the following procedure. The exchange roller kit is not included with the scanner. Purchase an exchange roller kit
  • Canon RP10 for CR-120/150 | CR-120/150 User Guide - Page 78
    D While pushing up the Separation OFF Lever, pinch the edge of the Feed Roller and the fixing lever, and then remove the roller. Fixing Lever E Pinch the Separation Roller at the rim and the fixing lever, and then remove it. Fixing Lever NOTE If the Feed Roller (Separation Roller) is not removed
  • Canon RP10 for CR-120/150 | CR-120/150 User Guide - Page 79
    G Attach the Pickup Roller. Align the notch on the roller axis with the hole on the roller. I Attach the Feed Roller. Align the notch on the roller axis with the hole on the roller. IMPORTANT Push down the roller until it clicks into place. H Attach the Separation Roller. Align the notch on the
  • Canon RP10 for CR-120/150 | CR-120/150 User Guide - Page 80
    Adjusting the Separation Roller Gap If double feed should occur too often, adjust the Separation Roller gap according to the following procedure. A Pull up the Adjustment Dial Cover. CAUTION Do not use the Adjustment Dial any other time except when adjusting the Separation Roller gap. Turning the
  • Canon RP10 for CR-120/150 | CR-120/150 User Guide - Page 81
    x 600 dpi Scanning speed (200 dpi Personal Check - 152 x 70 mm (5.98" x 2.76")) Automatic feeder capacity Automatic document feed capacity Network Connector (CR-150N/120N only） Interface CR-150: 150 cpm CR-120: 120 cpm CR-120UV: 120 cpm (UV Scan mode) Load limit of less than 15 mm (0.59") Up to
  • Canon RP10 for CR-120/150 | CR-120/150 User Guide - Page 82
    238.2 mm (D) (8.0" (H) x 6.7" (W) x 9.4" (D)) CR-150: Approximately 3.2 kg (7.05 lb) CR-120: Approximately 3.2 kg (7.05 lb) AC 100-120V the functions noted above if your software supports them. ■ These functions may not Canon dealer or service representative for detailed information about the replacement parts
  • Canon RP10 for CR-120/150 | CR-120/150 User Guide - Page 83
    Option Magnetic Swipe Reader (MSR) (Product code: 1732C003) This is the optional item to scan the magnetic card. 83
  • Canon RP10 for CR-120/150 | CR-120/150 User Guide - Page 84
    documents 49 Double Feed Detection 49 E Eject Pocket 22 Eject Stopper 22 Exterior Dimensions 24 F Features of the CR-150/CR-120 19 Feeding Trouble 61 H Handling 15 I imageFORMULA Utility 34 Ink Cartridge 22, 25, 74 Ink Disposal Tank Pocket 23, 75 Ink Jet Nozzle 70 Installation Location
  • Canon RP10 for CR-120/150 | CR-120/150 User Guide - Page 85
    54 Separation OFF Mode Button 21, 54, 72 Software How to Use the Software 28 Install 7 Uninstall 32 Specifications 81 T Top Cover 21 Troubleshooting 58 Turning OFF the Power 11 Turning ON the Power 10 U Ultrasonic Sensor 22 Unpacking the scanner 4 USB Connections 8, 58 USB Connector 23
  • Canon RP10 for CR-120/150 | CR-120/150 User Guide - Page 86
    Safety-related markings on the machine Marquages de sécurité sur la machine Marcature di sicurezza sulla macchina Sicherheitshinweise auf der Maschine Marcas de la máquina relacionadas con la seguridad Veiligheidsmarkeringen op de machine Makine üzerindeki güvenlik iġaretleri [English] [Français] [
  • Canon RP10 for CR-120/150 | CR-120/150 User Guide - Page 87
    [English] [Français] [Italiano] [Deutsch] [Español] [Nederlands] [Türkçe] Switch (Push-On/Push-Off) Commutateur (Appuyer pour mettre en marche/Appuyer pour arrêter) Interruttore a pulsante bistabile (On/Off) Schalter (Ein- und Ausschalten durch Drücken) Interruptor (pulsado para encendido/apagado)
  • Canon RP10 for CR-120/150 | CR-120/150 User Guide - Page 88
    [English] [Français] [Italiano] [Deutsch] [Español] [Nederlands] [Türkçe] DC symbol Indicates direct current Symbole CC Indique qu'il s'agit de courant continu Simbolo corrente continua (C.C.) Indica la corrente continua Gleichstrom-Symbol Kennzeichnet Gleichstrom Símbolo CC Indica
  • Canon RP10 for CR-120/150 | CR-120/150 User Guide - Page 89
    AUSTRALIA PTY. LTD. BUILDING A, THE PARK ESTATE, 5 TALAVERA ROAD, MACQUARIE PARK, NSW 2113, AUSTRALIA CANON SINGAPORE PTE. LTD. 1 FUSIONOPOLIS PLACE, #15-10, GALAXIS, SINGAPORE 138522 CANON INDIA PVT. LTD 7TH FLOOR, TOWER B DLF CYBER TERRACES DLF PHASE III GURGAON-122002 HARYANA, INDIA PUB. CE
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
Please read this manual before operating this scanner.
User Manual