Canon S300 S300 Easy Setup Instructions
Canon S300 - S 300 Color Inkjet Printer Manual
 |
UPC - 013803006315
View all Canon S300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Canon S300 manual content summary:
- Canon S300 | S300 Easy Setup Instructions - Page 1
computer, the other to the printer. 2 Insert the black ink tank into the slot on the right. Press down gently until the ink tank locks into place. Documentation and Software Kit S300 BJ (Bubble Jet) Printhead Power Cord 3 Press the POWER button. POWER Button POWER Light 3 Raise the gray lock - Canon S300 | S300 Easy Setup Instructions - Page 2
. Windows: a. Click Start, then Settings, then Printers. b. Right-click the Canon S300 icon, then click Properties. c. Click the Maintenance tab, then click the Print Head Alignment icon. d. When asked to start printhead alignment, click OK. e. Follow the on-screen instructions to complete printhead
-
1 -
2
 |
 |
Color Bubble Jet
™
Printer
S300
Start Here
Easy Setup Instructions
Carefully remove all items from the box.
1
S300 Series
Color Bubble Jet Printer
Documentation
and Software Kit
Power Cord
S300 BJ (Bubble Jet) Printhead
Paper Rest
Output Tray
Ink Tanks
BCI-24 Black BCI-24 Color
POWER
Light
POWER
Button
Serial number
Shipping Tape
1
Remove the printhead from its package.
NOTE:
Do not touch the electrical contacts.
Raise the gray lock lever.
3
Gently slide the printhead into the holder
until it is securely seated.
Do not press it down.
4
5
Lower the lock lever until it locks into place.
Protective cap
1
Remove the black ink tank (BCI-24 Black)
from its packaging and pull off the orange
protective cap.
2
NOTE:
To avoid spilling ink, do not touch the
bottom of the tank once you have removed
the protective cap.
Insert the black ink tank into the slot on the
right. Press down gently until the ink tank
locks into place.
3
Repeat the procedure for the color ink tank
(BCI-24 Color), inserting it into the remaining
slot.
4
Close the front cover and attach the
paper rest and output tray.
Turn the printer off.
1
Connect one end of a USB cable (not
included) to the computer, the other to
the printer.
2
IMPORTANT:
Be sure printer is
off before continuing, or the
computer will attempt to install
the printer driver before the
printer is ready.
Continue with Step 6
on side two.
USB Port
USB Cable
Turn the printhead over, then remove
the orange protective cap.
2
Electrical contacts
Open the front cover. The printhead holder
automatically moves to the center.
4
Press the POWER button.
3
Plug the power cord into the back of the
printer and connect the other end to a
power outlet.
2
1
Remove the shipping tape from the front
and sides of the printer.
Write down the serial number located to
the right of the printhead. You will need
this later to register the product.
5
2
Prepare the Printer
1
Unpack the Printer
3
Install the Printhead
4
Install the Ink Tanks
5
Connect the Printer
To Your Computer