Canon S820 S820 Easy Setup Instructions

Canon S820 - S 820 Color Inkjet Printer Manual

Get Canon S820 - S 820 Color Inkjet Printer PDF manuals and user guides View all Canon S820 manuals
Add to My Manuals
Save this manual to your list of manuals

Canon S820 manual content summary:

  • Canon S820 | S820 Easy Setup Instructions - Page 1
    all items from the box. S820 Photo Printer 2 Prepare the Printer 1 Remove the shipping tape from the front and sides of the printer. Start Here Easy Setup Instructions 3 Install the Print Head 1 Remove the print head from its package. Shipping Tape 2 Turn the print head over, then remove the
  • Canon S820 | S820 Easy Setup Instructions - Page 2
    POWER Lamp off 5 When the Printer Port window appears, TURN THE PRINTER ON so the printer port (connection) can be automatically detected. 6 Install the Printer Driver (Macintosh®) Macintosh 1 Turn on your Mac and insert the "S820 Setup Software & User's Guide" CD-ROM. 7 After the computer
  • 1
  • 2
Install the Ink Tanks
Unpack the Printer
1
2
3
4
5
Prepare the Printer
Install the Print Head
Connect the Printer
To Your Computer
Start Here
Easy Setup Instructions
Photo Printer
S820
Insert the ink tank into the correct slot.
(Refer to the color guide on the print head.)
Press down gently until the ink tank locks
into place.
Electrical contacts
Gently slide the print head into the holder.
The print head will rest at a slight angle.
Do not press it down.
Remove the print head from its package.
Turn the print head over, then remove
the orange protective cap.
NOTE:
Do not touch the electrical contacts.
Lower the lock lever and gently press
it down until it locks into place.
Raise the gray lock lever.
Plug the power cord into the back of the
printer and connect the other end to a
power outlet.
Open the front cover. The print head holder
automatically moves to the center. Remove
the protective tape.
Write down the serial number located to
the right of the print head. You will need
this later to register the product.
Protective tape
Serial number
Press the POWER button.
POWER
Lamp
POWER
Button
Remove the shipping tape from the
front and sides of the printer.
Shipping Tape
Carefully remove all items from the box.
S820
Photo Printer
Documentation
and Software Kit
Paper Rest
Output Tray
Pull the orange tab off the yellow ink tank
(BCI-6Y), then remove and discard the
plastic wrapper.
Twist off and discard the orange
protective cap.
NOTE:
To avoid spilling ink, never press on
the sides of an ink tank.
Insert the remaining five ink tanks into
their assigned slots.
Close the front cover and attach the
paper rest and output tray.
Protective cap
Ink Tanks
BCI-6C Cyan
BCI-6M Magenta
BCI-6BK Black
Yellow
BCI-6PC Photo Cyan
BCI-6PM Photo Magenta
Power Cord
S820 Print Head
(IEEE 1284 compliant)
Parallel Cable
For USB Cables:
For Parallel Cables:
Parallel Port
Secure
Wire Clips
Parallel Cable
USB Port
USB Cable
Continue with Step 6
on side two.
Turn the printer off.
Connect one end of the USB cable
to the computer, the other to the printer.
Turn the printer off.
Connect one end of the parallel cable to
the computer, the other to the printer.
IMPORTANT:
Be sure the printer is
off before continuing, or the computer
will attempt to install the printer
driver before the printer is ready.
IMPORTANT:
Be sure the printer is
off before continuing, or the computer
will attempt to install the printer
driver before the printer is ready.
1
2
3
4
1
5
4
3
1
2
1
2
3
4
5
1
2
2
1