Canon SELPHY CP800 SELPHY CP800 Printer User Guide - Page 29

Using the Battery Pack Use the battery pack NB-CP2L (sold separately) for printing images in places without a power outlet. With a fully charged battery, you can print approximately 36 sheets* of Postcard size paper. * The number of possible prints is based on Canon testing standards, and may change depending on printing conditions. Installing the Battery 1 Remove the battery cover.  Slide and hold the cover lock (), then remove the cover towards (). Air Vents 2 Remove the battery terminal cover. 3 Attach the battery.  Insert the tab (), then push the battery () until it clicks and locks into place. Charging the Battery Plug in SELPHY (p. 10).  Charging starts and appears on the screen.  Charging completes after approximately 4 hours. and disappears.  If you press the q button while the battery is charging (p. 11), SELPHY can be used; however, charging will stop. When you turn SELPHY off (p. 11), appears and charging resumes.  For cautions concerning the battery, refer to the user guide included with the battery.  When is displayed and you press any button other than the q button for 3 seconds or longer, will disappear. When the screen is turned off while the battery is charging and you press any button other than the q button, will appear after approximately 10 seconds.  If SELPHY is not used for more than five minutes, it will automatically turn off to save power.  If a red appears, the battery has reached the end of its life span. Purchase a new battery. 29