Canon VB-M720F Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62
Canon VB-M720F Manual
View all Canon VB-M720F manuals
Add to My Manuals
Save this manual to your list of manuals |
Canon VB-M720F manual content summary:
- Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 1
Network Camera NOetpwoerkraCatmioerna Guide Be sure to read this User Manual before using the network camera. ENGLISH - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 2
this guide carefully before using the camera to ensure correct use. Also, be sure to read the files in the LICENSE folder on the Setup CD-ROM. For the latest information on this product (firmware and included software, user manuals, operating environment, etc.), please refer to the Canon Web Site - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 3
this guide are VB-H43, VB-H630D, VB-H730F, VB-M42, VB-M620D, VB-M720F) Notes on the Included Software RM-Lite (Disclaimer) Flaws or other problems Camera Management Tool Camera Angle Setting Tool (Not used with the VB-H43/VBM42.) RM-Lite Network service or visit www.canon-europe.com/weee, or www.canon - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 4
product (camera and included RM-Lite) contains Open Source Software modules. For details, please refer to "ThirdPartySoftware-E.pdf" (Third , please contact us at [email protected] and provide the following information in English or Japanese: 1. Product name and firmware version. 2. Name of the - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 5
used to indicate those models. Icon Camera Model VB-H43 VB-H630VE and VB-H630D VB-H730F VB-M42 VB-M620VE and VB-M620D VB-M720F Symbols Indicating Safety Precautions This section explains symbols used in this "Operation Guide". This "Operation Guide" uses the following symbols to indicate - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 6
may apply. Therefore, please consult your legal advisor to determine whether FDA regulations apply. FCC NOTICE Network Camera, Model Name: VB-H43/VB-H630VE/ VB-H630D/VB-H730F/VB-M42/VB-M620VE/VB-M620D/ VB-M720F This device complies with Part 15 of the FCC Rules. Operation is subject to the - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 7
medical devices or other life-support systems. Depending on the PC and network environment, highprecision video transmission cannot be guaranteed due to video delay or loss. Canon will assume no liability for any accident or damage resulting from use of the camera in the aforementioned devices or - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 8
indoor dome housing and remove the dome. See steps in "Installing the Camera" in the "Installation Guide" included with the camera to remove the dome case. See "Using Camera Housing" in the "Installation Guide" included with the camera to remove the front cover. 2 Dampen a soft cloth with water or - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 9
This Operation Guide 5 User Manuals ...5 How to Use This Operation Guide 5 Icons Indicating Particular Camera Models 5 Network Video Recording Software (Sold Separately 15 RM-Lite (Please refer to the "Administrator Manual 17 Operating Environment 18 Camera Angle Setting Tool, Admin Viewer/VB - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 10
Setting Menu 48 Setting Menu ...48 Items Common to All Setting Pages 48 [Network] Setting Administrator Password, LAN, IP Address, DNS, etc 50 [Date and Time] Setting Date and Time 54 [Camera] Setting Initial Camera Settings and External Device Name 56 [Video] Setting Video Size, Quality and - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 11
98 Panorama Creation Tool 99 Display Screens of Panorama Creation Tool 100 Capturing a Panorama Image 100 Saving/Deleting a Panorama Image on the Camera 101 Saving a Panorama Image as Image Files/Opening from Image Files 101 View Restriction Setting Tool 102 Display Screens of View Restriction - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 12
Display Screens of Admin Viewer 139 VB Viewer ...140 Obtaining Camera Control Privileges 141 Controlling the Camera ...142 Magnifying Part of the Manually 159 Chapter 7 Appendix Memory Card Access 162 Modifiers ...164 Troubleshooting ...166 List of Log Messages 168 Log Messages on the Camera - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 13
1 Chapter Before Use ❏ Camera Features ❏ Software Information ❏ Operating Environment and Precautions - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 14
Waterproof Mechanisms (VB-H630VE/VB-M620VE only) Low Illumination Image Capture Smart Shade Control Auto Mode Video Size Video Distribution Custom Settings SD/SDHC/SDXC Memory Card Support* Intelligent Functions Small-Scale Video Monitoring via RM-Lite Software (Supplied) The camera is built with - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 15
VB Viewer allows users to configure basic camera controls and display images. The Admin Viewer lets you monitor all camera necessary. Canon H.264 Additional User network cameras to be used for multipoint surveillance, and for recording and playing back videos from the camera. The number of cameras - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 16
install RM-64/RM-25/RM-9 RM Manager and Viewer on multiple computers. Purchase the license to be able to view images captured by the camera from multiple sites and for other similar purposes. RM-Lite-V This additional license lets you install the RM-Lite Viewer and RM-Lite Manager on - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 17
Network Flow of Video from the Camera Flow of Recorded Video Supported cameras VB-R11VE, VB-R11, VB-R10VE, VB-M641VE, VB-M641V, VB-M640VE, VB-M640V, VB-M741LE, VB-M740E, VB-H43, VB-H630VE, VB-H630D, VB-H730F, VB-M42, VB-M620VE, VB-M620D, VB-M720F, VB-S30D, VB-S31D, VB-S800D, VB-S900F, VB-S805D, VB - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 18
firmware and included software, user manuals, operating environment, etc.), please refer to the Canon Web Site. Camera Angle Setting Tool, Admin Viewer/VB Windows Server 2008 R2 systems When using the camera's audio feature, the computer audio support feature is required. *1 Set the Control Panel - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 19
is set to [High] by default. Thus, when accessing the Admin Viewer/VB Viewer, the camera's Setting Page or the Admin Tools, a content block dialog box appears and the page fails to display correctly. To correct this problem, follow the procedure below to register the top page as a trusted site - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 20
Tools, it is recommended that you remove "about:internet" and the camera name as necessary and restore the original security level. Web Browser Startup of Admin Tools or Admin Viewer • Audio reception from VB Viewer This happens when Internet Explorer Enhanced Security Configuration (IE ESC - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 21
audio device has been installed. (If no audio device is installed, refer to your PC manual.) Enabling the Sound Function to Use Audio In Windows Server 2008/Windows Server 2012, the , double-click [Sound]. 2 Click [Sound]. 3 When the [Audio Service Not Running] message appears, click [Yes]. 21 - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 22
22 - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 23
2 Chapter Initial Settings ❏ Preparing the Camera for Use ❏ Installing the Necessary Software ❏ Initial Settings ❏ Access the Top Page of the Camera to Check Video - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 24
browser and check the video using the VB Viewer. "Access the Top Page of the Camera to Check Video" (p. 31) ▼ Installing the Camera Install the camera to suit the operating environment it will be used in. "Installation Guide" ▼ Setting the Camera Angle Use the Camera Angle Setting Tool to set the - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 25
fails to operate correctly, see the error message and log message information in "Chapter 7 Appendix". "Chapter 7 Appendix" Preparing the Camera for Use 2 Initial Settings Important Before starting operations, make sure that the setting page and Admin Tools settings are functioning correctly. 25 - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 26
for using Admin Viewer and Admin Tools • Camera Angle Setting Tool: Software to use for camera angle adjustments when installing the camera • .NET Framework 3.5 SP1/.NET Framework 4.5: The execution environment required for network camera software (not required if already installed on the - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 27
7 When the installation complete screen appears, click [Exit] or [Reboot]. The Camera Management Tool and Camera Angle Setting Tool icons appear on the desktop. Installing the Necessary Software 2 Initial Settings 27 - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 28
. 1 Connect the camera and computer to the network and turn on the power. Please refer to "Installation Guide" > "Connecting the Camera". 2 Double-click the [Camera Management Tool] icon on the desktop. Detected cameras will appear in the camera list. 2 Select a camera in the camera list and click - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 29
mask values for each network. (4) [Enter a default gateway address] checkbox Select this to manually set the default gateway address. (5) [IPv4 Default Gateway Address] Be sure to set this if you select [IPv4 Address Setting Method] > [Manual] and connect to the camera with a different subnet than - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 30
to [High] by default. As a result, it may be necessary to register the camera's IP address as a trusted site to access the Admin Viewer/ VB Viewer, Setting Page or Admin Tools. 1 Select a camera from the camera list. 2 Click [Maintenance] menu > [Add to Trusted Sites]. A confirmation message appears - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 31
Tool (p. 28) directly into the web browser. • If the camera top page does not launch, please refer to "Troubleshooting" (p. 166) Top Page From the top page of the camera, you can navigate to the Setting Page to configure various camera settings, launch Admin Tools, and access Viewers to view video - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 32
supported for IPv6 connections. Note • Only administrators can connect to a camera using the Setting Page and Admin Tools. • Authorized users with camera password (p. 31) and click [OK]. Checking Camera Video Check the camera video with a viewer. VB Viewer and Admin Viewer are available. This - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 33
Initial Settings Access the Top Page of the Camera to Check Video 2 33 - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 34
34 - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 35
3 Chapter Camera Angle Setting Tool ❏ Camera Angle Setting Method ❏ Creating a Camera Specification File to Manage Multiple Cameras - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 36
to connect to and click [OK]. Note You can also launch the Camera Angle Setting Tool from the Camera Management Tool. For details, please refer to the Camera Management Tool user manual. Connecting to the Camera 1 Click [Connect] from the [File] menu. The [Connection settings] dialog box will - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 37
[Yes] at the following message. Connecting with a Camera List Camera Angle Setting Tool When using multiple cameras, the camera connection information already entered into the camera specification 3 file can be read into the camera list used by the Camera Angle Setting Tool. This way you can - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 38
click [Open]. Connecting to the Camera From the camera list, select the camera to connect to and click [Connect]. The camera specification file will be loaded and camera names listed will be displayed under [Camera List]. Camera list Connecting to the Next Camera on the List Click [Next] to - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 39
Click [Disconnect] from the [File] menu to disconnect the currently connected camera. 2 Click [Exit] from the [File] menu to shut down the Camera Angle Setting Tool. Important Note that camera angle settings will be lost if you turn the camera on/off without performing the above steps. Setting the - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 40
(17) (7) (8) (9) (10) (2) (10) (1) (14) (15) (16) (17) (8) (9) (10) (1) Video Display Area The image captured by the camera is shown. (5) [Tilt] button Control the camera's tilt operation. (2) [Switch Screen Size] button Switches the display screen size between large display and small - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 41
(10)[Zoom] button The button to operate the zoom ratio. You can operate pan, tilt, rotation and zoom operations to set a desired camera angle. 3 Camera Angle Setting Tool (11)[Control Assist Display] selection box Select whether to [Enable] or [Disable] operation assist in the video display area - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 42
is focused whenever you restart the camera or use One-shot AF. • Focus ranges (rough guide) are shown in the table below. Focus Mode Day/Night Setting Day Mode Night Mode Manual Fixed at infinity 0.3 m (12 in.) - infinity 1.0 m (3.3 ft.) - infinity Focused at infinity* * When using an - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 43
default setting is 0). Registered Name Host Name 1st row Header row → From 2nd row Camera information for 1 camera per line (up to 30 cameras) ↓ RegisterName B1F VB-H730F 1Fa VB-H630VE 1Fb VB-H630D ..... ↓ HostName 192.168.100.1 192.168.100.2 192.168.100.3 ..... Port Number ↓ PortNumber - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 44
,192.168.100.3,80,root,camera3,0 2Fa VB-H630D,192.168.100.4,80,root,camera4,0 2Fb VB-H630D,192.168.100.5,80,root,camera5,0 3Fa VB-H730F,192.168.100.6,80,root,camera6,0 R VB-H630VE,192.168.100.7,443,root,camera7,0 Important If the camera specification file includes delimiters other than commas, such - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 45
4 Chapter Setting Page ❏ Administrator Password and Network Detailed Settings ❏ Camera Date and Time Settings ❏ Camera Name and Initial Camera Settings Related Settings ❏ Video Size and Quality Settings ❏ RTP Streaming Settings ❏ Upload and E-mail Notification Settings ❏ Video Server, Audio Server, - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 46
Network Administrator password, LAN, IPv4, IPv6, DNS, mDNS and SNMP Settings (p. 50) • Date and Time Camera date and time, time zone and daylight saving time settings (p. 54) • Camera Camera name, initial camera settings, camera (For details, contact your nearest Canon Customer Service Center.) 46 - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 47
Important Notes on Use with Internet Explorer 8/9/10/11 If the pop-up is blocked and an information bar appears when attempting to access [View Logs] or [View Current Settings] on the maintenance page, enable Pop-up by following the procedure explained in the information bar. Setting Menu 4 - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 48
31. Note Items Common to All Setting Pages You can also access the Setting Page from the Camera Management Tool. For details, please refer to the "Camera Management Tool User Manual". Applying New Settings Setting Menu (1) (2) When a setting is changed on any setting page, [Apply] shown on - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 49
page to return to the Setting Menu. Important • Do not open multiple setting pages at one time and try to change the settings of a single camera. • Do not use the [Back] or [Forward] buttons in the web browser to navigate between setting pages. The changed settings may return to the original - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 50
[Network] Setting Administrator Password, LAN, IP Address, DNS, etc The following can be set Address Setting Method] Select [Manual] or [Auto (DHCP)] in the address setting method. If [Manual] is selected, directly enter the values according to the environment in which the camera is used. If [Auto - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 51
[Network] Setting Administrator Password, LAN, IP Address, DNS, etc (4) [IPv4 Default Gateway Address] (5) [Prefix Length] Enter an appropriate value if [Manual] is specified in Enter a prefix length from 16 to 128 if [Disable] is (1). Be sure to set when connecting the camera to a specified - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 52
. If left blank, the following will be used by default: VB-H43 VB-H630VE or VB-H630D VB-H730F VB-M42 VB-M620VE or VB-M620D VB-M720F (5) [Installation Location] Set information regarding the installation location of this camera. Setting information can be referenced by the SNMP manager. SNMP v1 - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 53
[Network] Setting Administrator Password, LAN, IP Address, DNS, etc SNMP v3 Server (1) [User Name] [Security Level], set the encryption password. Note • The information set in the camera is read-only from the SNMP manager. • Use the SNMP Manager that supports SNMP MIB2 (supporting RFC1213). 53 - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 54
The date and time currently set in the camera are shown. Setting (1) [Setting Method] Select from [Set manually], [Synchronize with NTP server], [Synchronize from the DHCPv6 server. In order to set [Use DHCPv6], you must change [Network] > [IPv6] to [Enable], then set [Auto (DHCPv6)] to [Enable] - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 55
is selected, after clicking [Apply], [Setting Method] will change to [Set manually]. • If [Synchronize with NTP server] is selected and the IP address of will take time if the time difference is large. • The camera's NTP broadcast mode does not support IPv6. • If the [Time Zone] setting is changed, - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 56
set a negative value. The setting is not available if [Smart Shade Control] is set to [Auto]. (3) [Metering Mode] Set the metering mode when the camera starts. [Center-Weighted] The entire screen is metered by focusing on the center of the screen. Even when slightly darker/brighter areas are present - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 57
Smart Shade Control] Set the smart shade control strength when the camera starts. [Disable] The smart shade control function is not used decreased and resolution is increased, but the video file size becomes larger. [Manual] (8) [Sharpness] Set the smart shade control strength. Select a Select a - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 58
than 1/100 to see if the problem improves. • Setting a slow shutter the shutter speed. • The Day/Night Mode can be switched manually via the Day/ Night function of the Admin Viewer (p. 155), check the focus after rebooting the camera. • Focus ranges (rough guide) are shown in the following table - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 59
Setting Page Important • [AGC Limit] is disabled when [Exposure] is set to [Manual] or [Auto (Flickerless)] in the Admin Viewer. • Minimum subject illumination may to [Turn Off] if an optional indoor dome housing for the camera is used, if reflected LED light enters the capture area or otherwise - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 60
External Input Device 1, 2 / External Output Device 1, 2 [Device Name] for external input device/external output device Be sure to enter each device name in order to identify the corresponding external device being connected. Enter [Device Name (alphanumeric characters)] using up to 15 characters ( - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 61
Video Size, Quality and Frame Rate The following can be set here. Important • All Videos Specify the set of video sizes used by the camera. • Changing the [Video Size Set] setting will disconnect all connections and then change all the video sizes. 4 Setting Page • JPEG Set the video quality - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 62
using Admin Viewer and RM-Lite Viewer. It cannot be displayed using VB Viewer. (1) [Video Size] Select the size of the transmitted video. [0.5], [1], and [1.5] can be selected for [I Frame Interval (sec)]. • Network load will increase if a larger video size is set or higher video quality and - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 63
left] or [Lower right] for the position of time display information. (6) [Text display] Select [Display nothing], [Display designated string] or [Display camera name] for the text string to display over images. If [Display designated string] is selected, the [Text string display] set in (8) will be - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 64
[RTP] Setting RTP Server, Audio Multicast and RTP Streaming The following can be set here. • RTP Server Enable RTP, and set the RTSP authentication method and port number. • Audio Multicast Make settings for multicast audio transmission. • RTP Streaming 1 to 5 Make settings for RTP streaming of - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 65
, the bit rate control and video quality are determined by the settings in [Video] (p. 62). • Regardless of the [Server] > [Audio Server] > [Audio Transmission from the Camera] setting, RTP streaming audio will be used. However, to use audio settings, select [Enable] for [Audio Transmission from the - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 66
(p. 61) to a small size. • HTTP upload does not support SSL/TLS. • If the camera is set to perform upload or e-mail notification continuously, not all images that no messages appear in the event log. Note The server or network load may increase and the frame rate may drop, depending on the settings - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 67
disable [Active contact your nearest Canon Customer Service Center. Event Operation], [Inactive attached video, depending on the network camera event. (1) [Notification] Select password required for authentication. Digest authentication is not supported. (4) [Proxy Server] Enter the host name - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 68
[Maximum Number of Loops] If [Loop] is set under [File Naming], enter the maximum number of loops in the range of 0 to 9999. [User Setting] Images are uploaded according to the file naming method specified in [Subdirectory Name to Create] and [File Name to Create]. [Subdirectory Name to Create], [ - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 69
when no audio is output. This way, the load of the applicable network can be reduced. (4) [Audio Reception from Viewer] If [Enable] the connection time becomes unlimited. (4) [Camera Control Time (sec.)] Enter the maximum time VB Viewer can retain camera control privileges. The maximum number is 3600 - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 70
setting again. • Connect a speaker with amplifier to the camera ("Installation Guide" > "Audio Input/Output Terminals"). • If [Enable camera is used. • The video and audio may not be synchronized. • The audio may be temporarily interrupted, depending on the performance of the computer and the network - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 71
occurs. To record to a server selected on the [Upload] in the setting page, select [Upload] and to record to an memory card inserted in the camera, select [Record to Memory Card]. Important When using the upload function, or recording to the memory card, do not change the settings in the [Setting - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 72
see "Safety Precautions" in "Precautions for Use of Built-In Camera Functions and Included Software" (p. 7). • When Admin Viewer/VB Viewer has camera control privileges, those camera control privileges are released if the camera is moved to a preset position, specified in the [Preset] settings - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 73
control privileges are released if any of the following actions occur while the Admin Viewer/VB Viewer has camera (8) [E-mail Notification] Select the e-mail notification operation to be performed. If [Enable] is selected, e-mail notification will be performed when an external device input event - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 74
• [External Device Output] and [Day/Night Mode Switching] do not support [Repeat Interval]. • When [Day/Night] in the Admin Viewer is set Mode Switching] settings switch Day/Night Mode while the Admin Viewer/VB Viewer is assigned camera control, control will be released. Example: Timer [Timer 1] - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 75
password. • Authorized User Account Register who can access this camera. • User Authority Set the authorities for authorized users and [Yes] or [No]. You can specify the subnet and set access restrictions by network or host. If access is prohibited, access to all ports is restricted. Important • - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 76
restricted hosts and set IPv6 address access for each host to [Yes] or [No]. You can specify the prefix length and set access restriction by network or host. If access is prohibited, access to all ports is restricted. 76 - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 77
IPsec setting method. • Auto Key Exchange Settings Set auto key exchange. • IPsec Set IP security can be specified through auto key exchange or manual setting with up to five communicating devices. IPsec (6) [DH Group] Select the key generation information for the DH algorithm that will be used - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 78
it will take approximately 5 to 10 seconds before communication with the camera starts. IPsec Set (Manual) IPsec Sets 1 to 5 are available, and you can specify [AES], [3DES], [DES] or [NULL] according to the encryption algorithm supported by the device to connect to. Normally [AES] or [3DES] is - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 79
[HMAC_MD5_96] according to the authentication algorithm supported by the device to connect to. (17 camera IP address manually. For IPv4 addresses, use addresses set with [Network] > [IPv4 Address Setting Method] > [Manual]. For IPv6 addresses, use addresses set with [Network] > [IPv6 Address (Manual - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 80
[Create Self-Signed Certificate] After entering each of the following settings, click [Exec] to create a self-signed certificate. Follow the instructions in the message and reboot. The certificate created will take effect after rebooting. Note Creating a certificate takes time, so it is recommended - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 81
is not possible. Note • It may take a few minutes to generate an SSL key. • Depending on the type of the certificate being installed on the camera, a dialog box may appear indicating that the web browser has accepted the certificate and a connection can be made. If the dialog box does not appear - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 82
[802.1X] Network Port Authentication Settings The following can be set here. • 802.1X Authentication Display the 802.1X authentication enable/disable control and status. • Authentication Method Set - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 83
private key used for 802.1X authentication must be installed as separate items, irrespective of the installation status of certificates for SSL/TLS. [802.1X] Network Port Authentication Settings 4 Setting Page 83 - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 84
camera at the time of booting. For inserting and removing the MEMORY card, see "Installation Guide intelligent function event occurrence (p. 113) - When manually recorded to memory card from the Admin Viewer format is always 1 fps. • When a network error occurs during recording-mode stream, video is - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 85
the memory card. Failing to unmount first may result in management file problems or the memory card becoming inaccessible. You can use the Camera Management Tool (p. 28) to mount/ unmount memory cards from multiple cameras at the same time. (2) [Operation Settings], [Video Format], [Pre-event Buffer - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 86
Important Information recorded to the memory card may be regarded as "personal information". Take sufficient precautions for handling this information when releasing to third parties for disposal, transfer or repair. Note For accessing files saved to the memory card, see "Memory Card Access" (p. 162 - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 87
a single page. • LAN, IPv4, IPv6, Installation Conditions (VB-H43/ 4 VB-M42 only), HTTP Server Setting Page (1) [LAN] LAN interface, 70) Important These settings relate to network connectivity*. If any setting is changed to a value that may disable camera connection from the active web browser, - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 88
• If the restored settings were backed up from a different camera, note that an address conflict on the network may occur. • When restoring settings on a camera, do not use backup files that were created with firmware versions newer than that of the camera. Note • It is recommended that you back up - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 89
[Maintenance] Viewing Current Settings, Event Logs and Performing Maintenance e-mail when [Enable] is selected. For details on log messages, see [List of Log Messages] (p. 168). After entering a password, first click [Exec], then [Apply] the password. (2) [Notification Level] Select [Error], [ - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 90
90 - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 91
5 Chapter Admin Tools ❏ Privacy Mask Setting ❏ Panorama Image Registration ❏ View Restriction Setting ❏ Camera Preset Setting ❏ Intelligent Function Setting ❏ Viewing Logs ❏ Managing Memory Card Video - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 92
panorama image creation tool that shows the entire area that can be captured by this camera. Once a panorama image is captured and registered, it is shown in the panorama Restriction Tool restricts the viewable capture range in the VB Viewer. You can set the desired range with the mouse by referring to - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 93
preview in panorama or full image mode. You can also set [Preset Tour] whereby the camera tours and monitors multiple presets. This viewer shows the logs of operating conditions of the camera. 5 Admin Tools Intelligent Function Setting Tool (p. 113) This tool is used to set intelligent functions - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 94
] checkbox in Internet Explorer. • Any of the Admin Tools can also be launched from the Camera Management Tool. For details, please refer to the "Camera Management Tool User Manual". (4) (1) [Admin Viewer] Click to launch Admin Viewer. (2) [Setting Page] Click to launch Setting Menu. (3) [Back - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 95
mouse operation in the video display area changes. When the button is set to , privacy masks can be resized/moved. While in this mode, the camera orientation will not change. When the button is set to , pan/tilt operations can be performed. (3) [Switch Screen Size] button Each time this button is - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 96
, click [Restore settings]. 3 Click [Quick adding] to save the privacy mask area. The set privacy mask area is saved in the camera. You can set up to eight privacy masks. Repeat the setting operations to set multiple privacy mask areas. 4 Confirm privacy mask areas. Saved privacy mask - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 97
want to hide. Also, be sure to confirm that after setting a privacy mask, the area you want to hide does not become visible when the camera direction is altered by pan, tilt, or zoom operations. • If the privacy mask settings were changed after a panorama image was saved using the Panorama Creation - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 98
Enter a value for the [Privacy Mask Position and Size] and click [Preview settings] to check the position and size of the preview frame. Click [Get camera info] to load the current pan, tilt, and zoom settings. Note Select a disabled privacy mask and click [Quick change] to enable it. How to Delete - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 99
of the entire area the set area is occupying. 5 Admin Tools Create/capture a panorama image with the Panorama Creation Tool and save it in the camera. Admin Viewer Preset Setting Tool You can see at a glance which part of the entire area the displayed area is occupying. Important If the privacy - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 100
of Panorama Creation Tool (1) (2) (3) (5) (6) (7) (8) (11) (4) (12) (13) (14) (9) (1) [Load from camera] Show the panorama image saved in the camera. (2) [Save to camera] Save the currently shown panorama image in the camera. (3) [Load from file] Show JPEG files as a panorama image. (4) [Save - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 101
name in the displayed dialog box. Admin Tools Saving/Deleting a Panorama Image on the Camera How to Save Click [Save to camera], and then click [OK] in the displayed dialog box. The panorama image is saved to the camera. How to Open from Image Files Click [Load from file] and then select the - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 102
is a tool that limits the range that can be captured by the camera. If view restrictions have been set, you can limit the displayable capture Admin Viewer is accessed with authorized user authorities • When the VB Viewer is accessed • When accessed via the Intelligent Function Setting Tool • - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 103
] You can enter a value in each view restriction setting entry box to change the applicable setting. You can load the values for the current camera angle to the view restriction settings by clicking [Get value]. • View restriction settings [Upper Limit]: Top limit of the view restriction. Click [Get - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 104
. At this point, the settings are not yet saved in the camera. Be sure to click [Save settings]. (12)[Restore settings] Clear the settings sure to confirm with the VB Viewer that the view restrictions have been reflected correctly. • Confirm the settings using the VB Viewer. (View restrictions are - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 105
operating angle Captured image range • If the view restriction will be exceeded as a result of controlling the zoom toward the wide-angle side, the camera will first pan and tilt to a position where the maximum wide-angle zoom will be within the viewing restriction area. Wide-angle zoom control - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 106
desired settings with the mouse by referring to the preview in the panorama or full image mode. You can also set Preset Tour whereby the camera tours and monitors multiple presets. Preset Setting Tool Reflecting in the viewer Set preset tour after the presets have been set. Executing preset tour - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 107
/VB-M42) presets and the home position are set while referring to the panorama screen or full image. With the [Preset Tour] tab, Preset Tour is set whereby the camera tours and monitors multiple presets. The following explains the [Preset] tab display screen. For the [Preset Tour] tab, see "Preset - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 108
used. For details on light sources, see p. 57. • [R Gain], [B Gain] If white balance is set to [Manual], set the respective gains to a value between 0 and 1023. (12)[Get camera info] Load the current camera angle and other settings of the video display area to reflect them in the panorama screen and - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 109
. Using the Digital PTZ Function to Set Presets Use the Digital PTZ function to set part of the area that can be captured by the camera as a preset. 1 Select the preset you want to set from the [Home Position/Preset] selection box, and then fill in the [Preset Name] field. Be - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 110
a camera video. Therefore, this function reduces the load on the network. Specifying Detailed Settings If you want to fine-tune the camera angle on the Setting page have been changed. • If [Manual] is selected in [Focus Mode], manually adjust the focus while checking the actual image in the video - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 111
perform a preset tour from the following options. [Not used] Preset tour is not performed. [For Viewers] Preset tour is performed when a camera is connected via the VB Viewer, etc. [Always] Preset tour is always performed. (2) [Set Preset Tour Time] checkbox This setting is enabled when [For Viewers - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 112
display area. 4 Click [Change]. When you want to delete changes made to the tour schedule list and restore the settings registered in the camera, click [Restore settings]. 5 Click [Save settings]. When you complete setting the tour schedule list, click [Save settings]. The settings are saved in the - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 113
a change has occurred in the captured image due to movement of a subject. Camera Tampering Detection Moving Object Detection Volume Detection Camera E-mail notification 5 Admin Tools Network Admin Viewer RM Viewer Passing Detection Abandoned Object Detection Removed Object Detection Video - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 114
Detection Detect when the capture is being obstructed. This function can be used to detect when the camera orientation is changed or the image display is obstructed with spray, etc. Camera tampering detection is triggered when an area exceeding the set ratio of change is continuously altered by an - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 115
Event] > [Volume Detection] (p. 71). Caution Notes on Use of This Camera The intelligent functions are not suitable for applications where high reliability is required. If surveillance it is not recommended that you use this function. Canon shall assume no liability for any accident, loss or other - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 116
the same as in the Admin Viewer. For details, see "How to Operate the Viewer" (p. 139). However, when the (11) [Lock camera position] checkbox is selected, the camera is fixed at a preset position and cannot perform pan, tilt, and zoom operations. (2) [Switch Mouse Operation] button Each time this - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 117
page. Important Presets that were set with the Preset Setting Tool cannot be used for the settings of intelligent functions. (12)Camera position selection box Select the camera position from the view restriction presets or the home position. Use the Preset Setting Tool to set presets or the home - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 118
or home position is changed using Preset Setting Tool. • If [Status] in [Detection Setting List] is [Enabled] when the camera position is fixed, control privileges cannot be obtained by VB Viewer or RM Viewer. Also, the preset tour and auto control of custom settings will no longer run. • When using - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 119
a detection line. Important It is recommended that the detection criteria are set in a condition as close as possible to the condition in which the camera is actually used. Perform a detection test in advance to make sure that the detection frame continues to be displayed for a subject targeted for - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 120
Setting Event Operations ([Event] tab) Set operations to be performed upon detection of changes in a subject. [Event] tab (1) (2) (3) (4) (5) (1) Specify the operation timing. (Multiple checkboxes can be selected.) [ON Event Operation] checkbox When selected, the operations set in (2) [E-mail - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 121
• Click [Clear] to delete the polygonal detection area. • The camera tampering detection area cannot be changed. Changing a [Rectangular] detection area size of the detection area. When the ratio of an area where the camera has detected a moving object exceeds the value set for [Object Size (%)], - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 122
reconfigure the detection area to outline the recognized target object. Alternatively, use [Quick setting] (p. 121). Detect criteria for [Camera Tampering Detection] For [Camera Tampering Detection], the entire video display area becomes the detection area. Detected mode will be triggered to ON when - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 123
object Note Detection will not be possible for three seconds after the change ratio is modified when camera tampering detection is selected, or when switching into camera tampering detection from another detection mode. [Passing Direction] Select the direction for moving objects to pass the - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 124
setting selected. [Paste detection area/line] Paste the copied detection area/line to the detection setting selected. It cannot be copied to camera tampering detection. Pasting a detection line is possible only when the source and the target both set passing detection. [Clear detection area/line - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 125
logs] checkbox When selected, all logs, including those without a log code, are shown. (11)Log display area The content of log files downloaded from the camera, memory card, or PC is shown. (12)[Log Type] Select log types you want to show using the filter function. [Not specified]: Select to show - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 126
(13)[Date & Time] Set the date and time of the log you want to show using the filter function. Select the [Specify start date & time] or [Specify end date & time] checkbox to set the date and time. (14)[Apply filter] Show the filtered logs in the log display area. (15)[Search for] Enter the - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 127
is selected and a date and time are entered, logs generated on or before the specified date and time are shown. Important Logs saved in the camera's internal memory are cleared when you perform [Maintenance] > [Restore Default Settings] and [Reboot], or press the reset switch on the - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 128
video in the [Playback Videos] area (p. 131). (8) Video List Displays a list of videos recorded on an memory card and downloaded to a PC. (9) [Delete from Camera] Delete videos selected in the video list from the memory card. (10)[Download] Download videos selected in the video list to a PC. (11 - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 129
Select [Specified] and select the checkboxes for the type of video recording ([Upload], [Recording-Mode Stream], [Manual], [Timer], [Event]) (multiple selections possible). [Video in Camera] Select [Not specified], [Yes] or [No]. [Download Status] Select [Specified] and select the checkboxes for the - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 130
and after the change and copy the contents of the folder with the same name as the camera IP address. After copying, start up the Recorded Video Utility, click [Refresh Download Status] and the manually copied files will appear in the video list. For details on the folder configuration and file - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 131
playback may momentarily pause when switching files, depending on the network environment. • [Not Downloaded] or [Partially Downloaded] videos may the terms of the license agreement. The decoder is downloaded from the camera, enabling H.264 video playback. Playback Pause Move to next frame Move - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 132
Videos You can delete videos from an memory card. 1 Select a video to delete in the video list. 2 Click [Delete from Camera]. The video is deleted from the camera. Note If the selected videos contain [Not Downloaded] videos, a message prompting you to confirm deletion appears. Click [OK] to delete - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 133
will open or close the setting items. ⇔ You can display the Control for Admin Panel and open the various control items even without obtaining the camera control privileges, but the items will be grayed out. [Smart Shade Control] You can set Smart Shade Control. For details, see "Setting the Smart - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 134
134 - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 135
6 Chapter Admin Viewer/VB Viewer ❏ Differences between the Admin Viewer and the VB Viewer ❏ User Authorities and Camera Control Privileges ❏ Viewer Startup and Operation ❏ Camera Control and Obtaining Camera Control Privileges ❏ Admin Viewer Operation and Settings - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 136
control to use the Admin Viewer. Users must have the video distribution authority to display images using the VB Viewer. To operate the camera using the VB Viewer, users must also have camera control authority. Audio distribution authority is required to receive audio using the Admin Viewer and the - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 137
control. Authorized users can no longer launch the Admin Viewer upon losing privileged camera control. However, they can still launch the VB Viewer. Launching the VB Viewer can be prohibited by disabling all authorities of a given authorized user (p. 75). [Guest User] This user can only use the - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 138
. (p. 26) Note You can also launch the Admin Viewer from the Camera Management Tool. For details, please refer to the "Camera Management Tool User Manual". 1 Start the top page of the camera (p. 31). 2 Click [Admin Viewer] or [VB Viewer] according to the user. 3 For [Admin Viewer], enter the user - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 139
in the web browser. (2) (3) (10) (8) (4) (5) (6) (7)(11)(12) (31) (32) 6 (33) Admin Viewer/VB Viewer (1) (9) (13) (24) (14) (16) (18) (20) (22) (25) (15) (17) (19) in full screen mode. (5) [Reconnect] button The camera is reconnected. (6) [Audio Transmission] button Displays the Audio - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 140
Set the cropped area in the video display area. VB Viewer (2) (3) (11) (9) (4)(5)(6) (8) (1) (15)(16)(17) (12) (7) (10) (13) (14) (19) (15)(16) (20) (21) (22) (23) (24) (1) Video Display Area Displays images received from the camera. (2) Video Size Set the size of video received from - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 141
must obtain control privileges first. How to Operate Click the [Obtain/Release Camera Control] button to obtain the control privileges. Admin Viewer VB Viewer Camera Control Privilege Display Displays camera control privilege status. (14)[Get a Snapshot] button A still image from the moment - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 142
in the Admin Viewer with the authorized user authorities can control the camera only within the view restrictions. • Users operating the camera in the VB Viewer can control the camera within the view restrictions. Changing the Camera Angle You can change the angle by doing one of the following - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 143
drag in the direction you 6 would like to change the camera angle. An arrow will appear. Admin Viewer/VB Viewer 2 Drag out a rectangle in the video display area. , as well as defining the center of the video display. The camera angle will move in the direction of the arrow. The maximum length - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 144
knob downwards to zoom out (wide-angle) Wide end Note • If [Digital Zoom] is set to [Enable] in [Camera] on the Setting page, the icon for the digital zoom telephoto end is displayed. (p. 58). • In the Admin Viewer to [Auto]. • The [BLC] button is not available if [Exposure] is set to [Manual]. 144 - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 145
of an intelligent function. Important 6 Preview Frame (Magnified display area) Center of preview frame Admin Viewer/VB Viewer When the Viewer PTZ function is used, you cannot operate the camera by clicking/dragging the video display area. Note The initial status of the Viewer PTZ panel shows - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 146
button differs as follows depending on the state of the Digital PTZ function. Digital PTZ is disabled (displays the scene as seen by the camera). Digital PTZ is enabled (displays trimmed video). Specifying a Cropping Range Change the position and size of the preview frame on the Digital PTZ panel - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 147
Registered presets will appear in the preset selection box. Admin Viewer/VB Viewer Exiting Digital PTZ Click the [Digital PTZ] button Video Size You can set a desired video size for video received from the camera. The sizes that can be selected depend on the [Video Size Set] setting under [ - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 148
Clicking this button will switch the viewer to full screen mode. Admin Viewer VB Viewer To close the full screen window, select [Exit Full Screen Mode] . You can display the necessary panels for controlling the camera in the full screen mode. Right-click on the screen and select the - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 149
to [Enable] in the setting pages beforehand (p. 69). • The first time the Audio Reception panel is launched from the VB Viewer, a message to install the "Canon Network Camera Audio Receiver" add-on will be displayed in the information bar of the web browser. Install the add-on. • Regardless whether - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 150
image stabilization information • Pan, tilt, and zoom information for Digital PTZ (Yellow) Warning A message will appear notifying the user when camera control privileges cannot be obtained, audio reception stops, etc. (Orange) Error Appears when a system error occurs. Important If the image - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 151
Viewer, you can transmit audio via an external device connected to the camera. 6 Click this button to transmit audio. Use the slider to set No Limit], [1 min(s)], [5 min(s)] or [10 min(s)]. Admin Viewer/VB Viewer Icon Meaning Transmitting audio Not transmitting audio Note • To transmit audio - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 152
checkbox is always checked if [Control by zoom position] is selected in [Camera] > [Camera Control] > [Pan/Tilt Speed Control] on the setting page (p. 59 Shade Control] Select [Auto], [Manual], or [Disable]. (2) Adjusting the Smart Shade Control When smart shade control is [Manual], set one of the 7 - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 153
to [Auto] or [Manual], [Haze Compensation] is set to [Disable]. Admin Viewer/VB Viewer Note • When [Auto] or [Manual] is selected for [ Select from [Auto], [Manual], [Auto (Flickerless)] or [Auto (Shutter-priority AE)]. If [Auto] is selected for [Day/Night] under [Camera] in the Setting page - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 154
select a shutter speed lower than 1/100, to see if the situation improves. • [Exposure Compensation] and [Manual] for [Exposure] cannot be selected if [Smart Shade Control] is set to [Auto]. • When [Camera] > [Camera Control] > [AGC Limit] is set to [OFF] in the setting page and [Exposure] is set - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 155
Setting the Day/Night Mode (1) (2) (3) (4) (1) [Auto] The camera automatically switches to day mode or night mode depending on ambient brightness. (2) [ only be set when [Focus] is set to [Manual] (p. 153). (5) (6) (7) 6 Admin Viewer/VB Viewer (5) (6) (8) Focusing positions will vary under - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 156
this icon. Example: Output 1: inactive Output 2: active Registering Custom Settings By registering settings for camera position, exposure, white balance, etc. beforehand, you can load settings using manual or automatic control. In custom settings, the setting values for the following items in the - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 157
from the selection box. Register the auto control settings. Admin Viewer/VB Viewer (4) [Include Current PTZ Position] checkbox Select the checkbox to register , tilt, and zoom settings. (5) [Register] Register the current camera settings in the custom setting number selected in [Register to]. (6) - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 158
Product License Agreement dialog box appears. Click [Yes] to accept the terms of the license agreement. The decoder is downloaded from the camera, enabling H.264 video reception. Displaying Event Status Clicking the [Event Display] button will show the event display panel, which shows the input - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 159
Video Size: Upload / Memory card] H.264 [Video] > [H.264(1)] > [Video Size] Admin Viewer/VB Viewer Recording Videos Manually 1 If you have not yet obtained the camera control privileges, click the [Obtain/Release Camera Control] button and obtain the control privileges. 2 Click the [Start/Stop - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 160
160 - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 161
7 Chapter Appendix ❏ Memory Card Access ❏ Modifiers ❏ Troubleshooting ❏ List of Log Messages ❏ List of Viewer Messages ❏ Restore Default Settings ❏ List of Factory Default Settings ❏ Index - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 162
network errors (JPEG only) • Video files when HTTP or FTP upload failed (JPEG/H.264(1)) • Video files manually setting page (p. 85). • Canon will assume no liability for any camera and the date and time. The following shows the folder structure. Example: H.264 video, manually recorded using a camera - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 163
equal the local time. File Name Format for Data Downloaded with Recorded Video Utility Example: Video, manually recorded on Sept. 10, 2015, starting from 16:06:19 (Camera Time Zone: GMT+09:00). 20150910 070618-070619- M 00 _ 507.mov (1) (2) (3) (4) (1) Video recording date (2) File creation - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 164
.99 - 180.00 0 %T Tilt position -179.99 - 180.00 0 %Z Zoom position 0.01 - 300.00 %R Rotation position 0 %V Camera server VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M620VE/VB-M620D/VB-M720F %y Year of capture time 2001 - 2031 %m Month of capture time 01 - 12 %d Day of capture - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 165
Available Modifiers The modifiers that can be used for each setting item are specified below. [HTTP Upload] (p. 67) [Parameter (query string)] All modifiers can be used. [FTP Upload] (p. 67) [Subdirectory Name to Create] Only the modifiers %y,%m,%d,%w,%H,%h,%n can be used. [File Name to Create] - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 166
the message and corresponding countermeasure in the log message list. Note For details on troubleshooting for Camera Management Tool, please refer to the "Camera Management Tool User Manual". Problem Countermeasures The camera does not start. • If you are using a PoE hub, check if the LAN cable - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 167
you are using the Admin Viewer with the administrator authorities, check if the camera is connected to the RM Viewer or another viewer that lets the administrator use audio. • In VB Viewer, audio cannot be used if the Canon Network Camera Audio Receiver add-on is not installed. • When you are using - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 168
Note If no content is recorded in a log for approximately two hours, "-MARK --" will be recorded in the message area. Application (Camera) Messages W001 Starting and stopping of system [info] Description %1 webview (W001) %1 Starting or stopping Meaning wvhttp server (webview) has started - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 169
List of Log Messages Application (Uploader) Messages A004 Starting and stopping of uploader [info] Description %1 uploader (A004) %1 Starting or stopping Meaning The uploader was started or stopped. A040 Number of uploads (MAIL) [info] Description uploader mail: normal=%1 test=%2 (A040) - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 170
initialized. Countermeasure If the problem persists after rebooting the camera, the camera is faulty, arrange for servicing. Application (Audio time settings used when connecting. 43: Reconnect or restart. 45: Use supported client software. 47: Check user level used when connecting. 49: Check - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 171
B402) %1 Error number Meaning The audio server could not be initialized. The audio server stops. Countermeasure If the problem persists after rebooting, the camera is faulty. Arrange for servicing. Meaning An error in the video input was detected that may adversely affect the operation of the - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 172
input function was stopped because a video input command could not be processed. Countermeasure If the problem persists after rebooting, the camera is faulty. Arrange for servicing. V402 Video input frozen [crit] Description video %1 stalled (V402) %1 Video number Meaning The video input - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 173
System Messages %1 Video type ([Upload], [Recording-Mode Stream], [Manual], [Timer], [Event]) S001 System started [info] Meaning The upper service was shut down. S014 Timer service started [info] Description starting timer (S014) Meaning The timer service was started. S015 Timer service - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 174
%2 Cause of error %3 Error information Meaning An internal error occurred in the timer service. Countermeasure If the problem persists after rebooting, the camera is faulty. Arrange for servicing. S320 PAN/TILT operation error [err] Description %1 error occurred. [%2] (S320) %1 PAN | TILT - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 175
External input/output service initialization error Countermeasure Set Day/Night Mode to manual. [crit] C211 Camera control command overflow the timer service. Countermeasure If the problem persists after rebooting, the camera is faulty. Arrange for servicing. S413 Timer service runtime error - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 176
VIDEO_DATA_QUEUE AUDIO_CTRL_QUEUE AUDIO_DATA_QUEUE EVENT_CTRL_QUEUE RECVQ_META SENDQ_MEDIA Meaning A communication error occurred between modules. Countermeasure If the problem persists after repeated attempts and rebooting, the camera may be faulty. Arrange for servicing. 176 - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 177
failure [err] Description cannot get parameter: %1 (R302) %1 user_account: User account IP_address: IP address of the camera profile_media_configuration: MediaConfiguration information RTSP_port_number: RTSP port number Meaning Parameter acquisition has failed. R303 Metadata distribution - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 178
etc. Error Message Displayed when a system error occurs in the viewer. Information Messages Message Connection closed by the camera. Audio connection has been closed. Camera control gained. Camera control lost. Use the menu displayed by right-clicking to exit the full screen mode. Recording to - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 179
been clicked when there is no audio device or the audio device has been disabled in the PC. Appendix Failed to initialize Canon Network Camera Audio Receiver. ActiveX plugin is not installed within ten seconds after clicking the [Audio] button. Insufficient memory card capacity. An attempt was - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 180
IP address of the camera or your Administrator password, you cannot operate the camera via the network. In this case, press the reset switch at the back of the camera. 1 For VB-H630VE/VB-H630D/VB-M620VE/VB-M620D, remove the dome case. For dome case removal, see the "Installation Guide" included with - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 181
Initial Camera Settings" (p. 28)). Restore Default Settings VB-H630D/VB-M620D Reset Switch 7 Reset Switch Appendix Reset Switch VB-H630VE/VB-M620VE Reset Switch 4 For VB-H630VE/VB-H630D/VB-M620VE/VB-M620D, attach the dome case. For dome case attachment, see the "Installation Guide" included - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 182
Contact Information Setting root camera Auto 1500 Manual 192.168.100.1 255.255.255.0 Enable Enable Enable Enable 64 Disable Disable Enable Disable Disable 182 Item Administration Function Name Setting VB-H43/VB-M42 VB-H630VE/VB-H630D/ VB-M620VE/VB-M620D/ Installation Location • SNMP - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 183
Compensation Disable Video Quality: 1920 x 1080 3 Haze Compensation Level Day/Night 4 Day Mode Video Quality: Digital PTZ 3 (VB-H630VE/VB-H630D/ VB-H730F) • Camera Control Video Size: video Transmission 480 x 270 Digital Zoom Image Stabilizer Disable Disable Maximum Frame Rate: Video - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 184
Buffer (number of 0 frames) Post-event Buffer (number of 0 frames) Pre-event Buffer (sec) 0 Post-event Buffer (sec) 0 • HTTP Upload * [320 x 180 JPEG] for the VB-M42/VB-M620VE/VBM620D/VB-M720F. - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 185
Subject Message Body • Video Server Maximum Number of Clients 30 Camera Control Queue Length 30 Maximum Connection Time 0 (sec.) Camera Control Time (sec.) 20 • Audio Server Audio Transmission from the Camera Disable Input Volume 50 Voice Activity Detection Disable List of Factory - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 186
3 Sound Clip Name • Administrator Password • Authorized User Account User List • User Authority Authorized User Privileged Camera Control Camera Control Video Distribution Audio Distribution Guest user Camera Control Setting Disable 00:00 00:00 None Disable Disable Disable Disable 00:00 00:00 None - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 187
Item Setting Video Distribution Checked Audio Distribution Checked • IPv4 Host Access Restrictions Apply Host Access Restrictions Disable Default Policy Authorize Access Network Address / Subnet 01: / 32 Yes 02: / 32 Yes 03: / 32 Yes 04: / 32 Yes 05: / 32 Yes 06: / 32 Yes 07: / 32 - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 188
Item Setting SA ESP Authentication Key (inbound) SA ESP SPI (inbound) SA AH Authentication Algorithm HMAC_SHA1_96 SA AH Authentication Key (outbound) SA AH SPI (outbound) SA AH Authentication Key (inbound) SA AH SPI (inbound) • IPsec Set 2 IPsec Set Disable IPsec Mode Tunnel Mode - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 189
Item Setting IKE Pre-Shared Key SA ESP Encryption Algorithm AES SA ESP Authentication Algorithm HMAC_SHA1_96 SA ESP Encryption Key (outbound) SA ESP Authentication Key (outbound) SA ESP SPI (outbound) SA ESP Encryption Key (inbound) SA ESP Authentication Key (inbound) SA ESP SPI (inbound) - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 190
Item Notification Level Mail Server Name Mail Server Port Sender (From) Recipient (To) Authentication User Name POP Server Error Setting 25 None 190 - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 191
60 DHCP 50 Digest Authentication 70 B Digital PTZ 146 Back Up Settings 88 Digital Zoom 58, 144 Basic Authentication 70 Display Options 116 Basic Camera Settings 28 Display Screen Size 148 Bit Rate Control 62 DNS 51 BLC (Back Light Compensation 140, 144 Dome 59 Drag to Move - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 192
58 Information Field 140, 150 Information Message 178 Infrared Cut Filter 155 Initial Camera Settings 56 Initial Settings 180 192 Input Volume 69 Installation Conditions 59 Installation Guide 5 Installing the Necessary Software 26 Intelligent Function Setting Tool 113 IP Address 50 - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 193
Address 51 Network 50 Network Address/ Camera Control 75, 136 Privileges 141 Pulse 72 R Reboot Item 87 Reconnect 149 Recorded Video Utility 128 Recording Manually 41, 105, 142 Time 54 Time Zone 54 Timer 73, 157 Troubleshooting 166 Trusted Site 19, 30 TTL 64 U Unmount 84 Upload 66 - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 194
User Name 31 User Page 46 V VB Viewer 135, 140 Video Distribution 75, 136 Video Format 66, 61, 139, 147 View Restriction Setting Tool 102 Viewer Admin Viewer 139, 151 RM-Lite Viewer 17 VB Viewer 140 Viewer PTZ 145 Voice Activity Detection 69 Volume 73, 120 Volume Detection 71, 158 W Warning - Canon VB-M720F | Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 195
BIE-7032-002 © CANON INC. 2015
ENGLISH
Network Camera
Network Camera
Operation Guide
Be sure to read this User Manual before using the network camera.