Canon VB-S31D User Manual

Canon VB-S31D Manual

Get Canon VB-S31D PDF manuals and user guides View all Canon VB-S31D manuals
Add to My Manuals
Save this manual to your list of manuals

Canon VB-S31D manual content summary:

  • Canon VB-S31D | User Manual - Page 1
    Network Camera NOetpwoerkraCatmioerna Guide Be sure to read this Operation Guide before using the network camera. ENGLISH
  • Canon VB-S31D | User Manual - Page 2
    this guide carefully before using the camera to ensure correct use. Also, be sure to read the files in the LICENSE folder on the Setup CD-ROM. For the latest information on this product (firmware and included software, user manuals, operating environment, etc.), please refer to the Canon Web Site
  • Canon VB-S31D | User Manual - Page 3
    or destruction or loss of recorded data. Canon shall have no liability whatsoever for any loss or damages incurred by the user as a result of such problems. Notes on License Agreement for Included Software For information on the License Agreement for Included Software, refer to the next file in
  • Canon VB-S31D | User Manual - Page 4
    Open Source Software The product (camera and included RM-Lite) contains Open Source Software modules. For details, see "ThirdPartySoftware-E.pdf" (Third-Party Software License) in the OpenSourceSoftware folder in the LICENSE folder on the Setup CD-ROM. Each module's license conditions are also
  • Canon VB-S31D | User Manual - Page 5
    viewer operations, troubleshooting and the main camera specifications, etc. This document is included in the Setup CD-ROM. In the Setup CD-ROM, the recording software RM-Lite (see "Chapter 1 Before Use" > "RM-Lite") is also included. The following user manuals are available. Network Video Recording
  • Canon VB-S31D | User Manual - Page 6
    instructions without fail. Important Warnings Caution TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. FDA regulation This Network Camera Network Camera, Model Name: VB-S30D/VB-S31D/ VB-S800D/VB-
  • Canon VB-S31D | User Manual - Page 7
    -in camera functions or included software listed below in cases requiring a high level of reliability: - Intelligent functions - Network video recording software RM-Lite These features do not guarantee high-precision capture and cannot support applications beyond their intended range of use. Canon
  • Canon VB-S31D | User Manual - Page 8
    , remove it following the steps below to clean it more thoroughly. 1 Remove the top cover. See steps in "Installing the Camera" in the "Installation Guide" included with the camera to remove the top cover. 2 Dampen a soft cloth with water or diluted neutral detergent and wipe away the grime gently
  • Canon VB-S31D | User Manual - Page 9
    1 Before Use Features...14 Camera Software...15 Installed Software...15 Included Software ...15 Additional License (Sold Separately 15 Network Video Recording Software (Sold Separately 15 RM-Lite (See the "Administrator Manual 17 Operating Environment 18 VB Initial Setting Tool, Admin Viewer
  • Canon VB-S31D | User Manual - Page 10
    32 Accessing the Top Page of the Camera 32 User Authentication...32 Chapter 4 Setting Page Setting Menu...34 Accessing the Setting Menu 35 Setting Menu ...35 Items Common to All Setting Pages 35 [Network] Setting Administrator Password, LAN, IP Address, DNS, etc 37 [Date and Time] Setting
  • Canon VB-S31D | User Manual - Page 11
    82 Panorama Creation Tool 83 Display Screens of Panorama Creation Tool 84 Capturing a Panorama Image 84 Saving/Deleting a Panorama Image on the Camera 85 Saving a Panorama Image as Image Files/Opening from Image Files 85 View Restriction Setting Tool 86 Display Screens of View Restriction
  • Canon VB-S31D | User Manual - Page 12
    to a Memory Card Manually 140 Chapter 7 Appendix Memory Card Access 142 Modifiers ...144 Troubleshooting ...146 List of Log Messages 148 Log Messages on the Camera 148 List of Viewer Messages 157 Messages Displayed in the Information Field 157 Restore Default Settings 159 Restoring the
  • Canon VB-S31D | User Manual - Page 13
    1 Chapter Before Use ❏ Camera Features ❏ Software Information ❏ Operating Environment and Precautions
  • Canon VB-S31D | User Manual - Page 14
    , tempering detection, passing detection, volume detection. By using the supplied network video recording software, RM-Lite, you can record and display live video from up to four cameras. * In this manual, the memory card that can be used with the camera is referred to as "memory card". 14
  • Canon VB-S31D | User Manual - Page 15
    necessary. „ Canon H.264 Additional User License AULVB (Sold Separately) Additional license added for viewing H.264 video with multiple computers via Admin Viewer or Recorded Video Utility. Network Video Recording Software (Sold Separately) „ RM-64/RM-25/RM-9 This software allows network cameras to
  • Canon VB-S31D | User Manual - Page 16
    license lets you install RM-64/RM-25/RM-9 Viewer on multiple computers. Purchase the license to be able to view video captured by the camera from multiple sites and for other similar purposes. „ RM-Lite-V This additional license lets you install the RM-Lite Viewer on multiple computers. Purchase the
  • Canon VB-S31D | User Manual - Page 17
    Storage Server Network Flow of Video from the Camera Flow of Recorded Video Supported cameras VB-S30D, VB-S31D, VB-S800D, VB-S900F, VB-H41, VB-H610VE, VB-H610D, VB-H710F, VBM40, VB-M600VE, VB-M600D, VB-M700F, VB-C60, VB-C500VD/VB-C500D, VB-C300, VB-C50i/VB-C50iR, VB-C50FSi/VB-C50Fi Important
  • Canon VB-S31D | User Manual - Page 18
    firmware and included software, user manuals, operating environment, etc.), please refer to the Canon Web Site. VB Initial Setting Tool, Admin Viewer/VB and Windows Server 2008 R2 systems When using the camera's audio feature, the computer audio support feature is required. *1 Set the Control Panel
  • Canon VB-S31D | User Manual - Page 19
    Explorer is set to [High] by default. Thus, when accessing the Admin Viewer/VB Viewer, the camera's Setting Page or the Admin Tools, problem, follow the procedure below to register the top page as a trusted site. 1 Access the Admin Viewer/VB Viewer and the Setting Page from the top page of the camera
  • Canon VB-S31D | User Manual - Page 20
    Notes on Use with Windows Server 2008/ Windows Server 2012 4 Enter the IP address of the camera under [Add this Web site to the zone], and then click [Add Startup of Admin Tools or Admin Viewer • Audio reception from VB Viewer This happens when Internet Explorer Enhanced Security Configuration (IE
  • Canon VB-S31D | User Manual - Page 21
    your computer manual.) „ Enabling the Sound Function to Use Audio In Windows Server 2008/Windows Server 2012, the sound function is disabled by default. To environment, see the "Administrator Manual". Notes for Windows 8/Windows Server 2012 Each software application, including Admin Viewer and
  • Canon VB-S31D | User Manual - Page 22
    22
  • Canon VB-S31D | User Manual - Page 23
    2 Chapter Initial Settings ❏ Preparing the Camera for Use ❏ Initial Setting Tool Installation ❏ Initial Settings
  • Canon VB-S31D | User Manual - Page 24
    the VB Viewer. "Checking the Camera Video" (p. 29) ▼ Installing the Camera Install the camera to suit the operating environment it will be used in. "Installation Guide" ▼ Configuring the Camera from the Setting Page The setting page lets you configure basic camera settings, network operations, user
  • Canon VB-S31D | User Manual - Page 25
    fails to operate correctly, see the error message and log message information in "Chapter 7 Appendix". "Chapter 7 Appendix" Preparing the Camera for Use 2 Initial Settings Important Before starting operations, make sure that the setting page and Admin Tools settings are functioning correctly. 25
  • Canon VB-S31D | User Manual - Page 26
    3.5 SP1/.NET Framework 4.5: The execution environment required for network camera software (not required if already installed on the computer) You can perform either an Easy Installation or a Custom Installation of the software. Note • All computer users will be able to use Admin Viewer and Admin
  • Canon VB-S31D | User Manual - Page 27
    Explorer is set to [High] by default. Thus, when accessing the Admin Viewer/VB Viewer, the camera's Setting Page or the Admin Tools, Viewer/VB Viewer and the Setting Page from the top page of the camera with Internet Explorer. The following dialog box appears. 4 Enter the IP address of the camera
  • Canon VB-S31D | User Manual - Page 28
    the network and turn on the camera ("Installation Guide" > "Connecting the Camera"). 2 Launch the VB Initial Setting Tool. To launch the VB Initial Setting Tool, double-click the [VB Initial Setting Tool] icon on the desktop. 4 Enter the user name "root" and factory default setting password "camera
  • Canon VB-S31D | User Manual - Page 29
    video. If the top page of the camera does not appear or the VB Viewer does not launch, see "Troubleshooting" (p. 146) in "Chapter 7 Appendix". Important • The camera video cannot be checked until the network settings in the computer are configured for the IP address and subnet that are set in the
  • Canon VB-S31D | User Manual - Page 30
    30
  • Canon VB-S31D | User Manual - Page 31
    3 Chapter Top Page of the Camera ❏ Accessing the Setting Page, Admin Tools and Viewer
  • Canon VB-S31D | User Manual - Page 32
    [Remember my credentials] checkbox be cleared. • If the wrong user name or password is entered, you cannot connect to the camera. Connect to the camera by entering the correct user name and password. • Press the reset switch to restore factory default settings if you have forgotten the administrator
  • Canon VB-S31D | User Manual - Page 33
    Password and Network Detailed Settings ❏ Camera Date and Time Settings ❏ Camera Name and Initial Camera Settings Related Settings ❏ Video Size and Quality Settings ❏ Upload and E-mail Notification Settings ❏ Video Server, Audio Server and HTTP Server Settings ❏ Settings Related to Events ❏ User
  • Canon VB-S31D | User Manual - Page 34
    logs, current settings, rebooting and restoring initial settings) (p. 73) • Camera Angle Digital zoom settings (p. 74) • User Page Link to web page customized by the user (For details, contact your nearest Canon Customer Service Center.) Important Notes on Use with Internet Explorer 8/9/10/11 If the
  • Canon VB-S31D | User Manual - Page 35
    Accessing the Setting Menu The various settings of the camera are configured by accessing the camera in the web browser. First, access the top page of the camera (p. 32). For details on entering the user name and password, see p. 32. 4 Setting Page Setting Menu (3) (1) (2) Items Common to
  • Canon VB-S31D | User Manual - Page 36
    page to return to the Setting Menu. Important • Do not open multiple setting pages at one time and try to change the settings of a single camera. • Do not use the [Back] or [Forward] buttons in the web browser to navigate between setting pages. The changed settings may return to the original
  • Canon VB-S31D | User Manual - Page 37
    (1), enter a fixed IP address. (3) [Subnet Mask] If [Manual] is specified in (1), enter the designated subnet mask values for each network. (4) [IPv4 Default Gateway Address] Enter an appropriate value if [Manual] is specified in (1). Be sure to set when connecting the camera to a different subnet
  • Canon VB-S31D | User Manual - Page 38
    IP address that starts with 127., such as 127.0.0.1. • If any of the [IPv4 Address], [Subnet Mask] or [IPv4 Default Gateway Address] settings are wrong, network access may be disabled. In this case, see "Performing Initial Settings for the Camera" (p. 28) and use VB [IPv6 Address (Manual)] Enter a
  • Canon VB-S31D | User Manual - Page 39
    [Network] Setting Administrator Password, LAN, IP Address, DNS, etc (3) [Name Server Address ( default: Select [Enable] to register the entered name server VB-S30D address and host name of the camera. VB-S31D (7) [Search Domain] Specify the host name, without specifying a domain VB-S800D VB
  • Canon VB-S31D | User Manual - Page 40
    set [Use DHCP], you must change [Network] > [IPv4 Address Setting Method] to [Auto (DHCP)] (p. 37). Current Date and Time [Date], [Time] The date and time currently set in the camera are shown. Setting (1) [Setting Method] Select from [Set manually], [Synchronize with NTP server], [Synchronize with
  • Canon VB-S31D | User Manual - Page 41
    server] is selected and the IP address of the NTP server is incorrect or a connection with the NTP server cannot otherwise be established, the date and time will not be changed. • The NTP server query interval is 300 seconds. • The camera's NTP broadcast mode does not support IPv6. • If the [Time
  • Canon VB-S31D | User Manual - Page 42
    [4 (Bright)]. To brighten the video, set a positive value. To darken the video, set a negative value. (3) [Metering Mode] Set the metering mode when the camera starts. [Center-Weighted] The entire screen is metered by focusing on the center of the screen. Even when slightly darker/brighter areas are
  • Canon VB-S31D | User Manual - Page 43
    Manual] Set the values of red and blue gain according to the light source. Enter a value from 0 to 1023 for both Important • The initial camera settings (1) to (10) define the defaults that apply when the camera AE)] and selecting a shutter speed lower than 1/100 to see if the problem improves. 43
  • Canon VB-S31D | User Manual - Page 44
    light as the camera does not have an insertion/removal mechanism for the filter. • When Day/Night Mode is set to [Manual], in addition [Auto]. Important • [AGC Limit] is disabled when [Exposure] is set to [Manual] or [Auto (Flickerless)] in the Admin Viewer. • Minimum subject illumination may change
  • Canon VB-S31D | User Manual - Page 45
    has already been set. When [Return to Home Position] is selected and no users have control privileges, the camera moves automatically to the home position. This function requires the home position of the camera be set in advance. Set the home position using Preset Setting Tool (p. 90). External
  • Canon VB-S31D | User Manual - Page 46
    will disconnect all connections and then change all the video sizes. Consequently, users connected to the camera must reconnect. • If the [Video Size Set] selection is changed and you click [Apply and Reboot], review the following settings and check the operation. - Privacy mask settings - View
  • Canon VB-S31D | User Manual - Page 47
    [0.5], [1], and [1.5] can be selected for [I Frame Interval (sec)]. • Network load will increase if a larger video size is set or higher video quality displayed using Admin Viewer and RMLite. However, it cannot be displayed using VB Viewer. (6) [I Frame Interval (sec)] Select [0.5], [1], [1.5], [2],
  • Canon VB-S31D | User Manual - Page 48
    left] or [Lower right] for the position of time display information. (6) [Text display] Select [Display nothing], [Display designated string] or [Display camera name] for the text string to display over video. If [Display designated string] is selected, the [Text string display] set in (8) will be
  • Canon VB-S31D | User Manual - Page 49
    authentication method to [Basic Authentication], [Digest Authentication], or [No Authentication]. (3) [RTSP Port] Set the RTSP port number to 554 or in the range of 1024 to 65535. Normally [554] (factory default setting) is used. Audio Multicast (1) [Multicast Address] Set the multicast address for
  • Canon VB-S31D | User Manual - Page 50
    Requests multicast Example: RTP streaming 1 request using RTP over TCP rtsp://192.168.100.1:554/rtpstream/config1=r Note that the actual operation is [Enable] for [Audio Transmission from the Camera] and make the settings. • The [Access Control] > [User Authority] > [Video Distribution] and [Audio
  • Canon VB-S31D | User Manual - Page 51
    (p. 46) to a small size. • HTTP upload does not support SSL/TLS. • If the camera is set to perform upload or e-mail notification continuously, not all video that no messages appear in the event log. Note The server or network load may increase and the frame rate may drop, depending on the settings
  • Canon VB-S31D | User Manual - Page 52
    attached videos, depending on the network camera event. Important • Enter [Proxy Server], [Proxy Port], [Proxy User Name] and [Proxy Password] if connecting via a proxy. • For information about the HTTP upload function and settings, contact your nearest Canon Customer Service Center. FTP Upload
  • Canon VB-S31D | User Manual - Page 53
    user name and password as well as the host name or IP address of 4 the POP server required for authentication. Setting Page If file naming is set to [User IP address of the SMTP server (using up to 63 characters). (3) [Mail Server Port] Enter the port number of the SMTP server (factory default
  • Canon VB-S31D | User Manual - Page 54
    the specification of the microphone. Using the wrong input may damage the camera and/or microphone. Be sure to configure settings correctly. Important • Video performance of the computer and the network environment. • The audio may be interrupted if anti-virus software is enabled. • Communication may
  • Canon VB-S31D | User Manual - Page 55
    port number to 443 or in the range of 1024 to 65535. Normally [443] (factory default setting) is used. Important If the setting of [HTTP Port] or [HTTPS Port] is changed, the camera may become inaccessible from the active web browser. Check beforehand the precautions in "Important" in "[Reboot
  • Canon VB-S31D | User Manual - Page 56
    occurs. To record to a server selected on the [Upload] in the setting page, select [Upload] and to record to a memory card inserted in the camera, select [Record to Memory Card]. Note The size and format of video recorded according to the [Video Record Action] settings are as follows: [Video Record
  • Canon VB-S31D | User Manual - Page 57
    for Use of Built-In Camera Functions and Included Software" (p. 7). • When Admin Viewer/VB Viewer has camera control privileges, those camera control privileges are released if the camera is moved to a preset position, specified in the [Preset] settings (VB-S30D/VB-S31D only), by a volume detection
  • Canon VB-S31D | User Manual - Page 58
    device input event is triggered (p. 137). • When Admin Viewer/VB Viewer has camera control privileges, those camera control privileges are released if the camera is moved to a preset position, specified in the [Preset] settings (VB-S30D/VB-S31D only), by an external device input event operation, or
  • Canon VB-S31D | User Manual - Page 59
    Timer 1]. • [External Device Output] and [Day/Night Mode Switching] do not support [Repeat Interval]. 4 • When [Day/Night] in the Admin Viewer is set ] settings switch Day/Night Mode while the Admin Viewer/VB Viewer is assigned camera control, control will be released. Note When using timers
  • Canon VB-S31D | User Manual - Page 60
    have higher authorities than guest users. For details, see "User Authorities and Camera Control Privileges" (p. 120). IPv4 Host Access Restrictions (1) [Apply Host Access Restrictions] Set IPv4 host access restrictions to [Disable] or [Enable]. (2) [Default Policy] If IPv4 host access restrictions
  • Canon VB-S31D | User Manual - Page 61
    access restrictions are applied, select [Authorize Access] or [Prohibit Access] for the default policy. (3) [Prefix / Prefix Length] Create a list of permitted hosts and length and set access restriction by network or host. If access is prohibited, access to all ports is restricted. [Access Control]
  • Canon VB-S31D | User Manual - Page 62
    Settings Set auto key exchange. • IPsec Set IP security can be specified through auto key exchange or manual setting with up to five communicating devices. IPsec Period (min)] Set the duration of validity for ISAKMP SA (factory default setting is [480]). IPsec Set (Auto Key Exchange) IPsec Sets
  • Canon VB-S31D | User Manual - Page 63
    to 10 seconds before communication with the camera starts. IPsec Set (Manual) IPsec Sets 1 to 5 are available, ] or [NULL] according to the encryption algorithm supported by the device to connect to. Normally [AES set to [Tunnel Mode] in (2), set the IP address of the security gateway. (11)[SA ESP
  • Canon VB-S31D | User Manual - Page 64
    [HMAC_MD5_96] according to the authentication algorithm supported by the device to connect to. (17 camera IP address manually. For IPv4 addresses, use addresses set with [Network] > [IPv4 Address Setting Method] > [Manual]. For IPv6 addresses, use addresses set with [Network] > [IPv6 Address (Manual
  • Canon VB-S31D | User Manual - Page 65
    , click [Exec] to create a self-signed certificate. Follow the instructions in the message and reboot. The certificate created will take effect after certificate and a primary intermediate certificate, use a text editor or similar software to place them in the same file and install them as an
  • Canon VB-S31D | User Manual - Page 66
    an SSL key. • If SSL communications are used, video transmission performance drops. • Depending on the type of the certificate being installed on the camera, a dialog box may appear indicating that the web browser has accepted the certificate and a connection can be made. If the dialog box does not
  • Canon VB-S31D | User Manual - Page 67
    [802.1X] Network Port Authentication Settings The following can be set [EAP-PEAP] for the 802.1X authentication method. (2) [User Name] Enter the user name used for authentication. (3) [Password] Enter the required password for authentication. This is displayed only when [Authentication Method]
  • Canon VB-S31D | User Manual - Page 68
    (5) [Delete Certificate] Deletes all installed CA certificates, client certificates, and client private keys. Only "CA Certificate" is displayed when [Authentication Method] is set to [EAP-TTLS] or [EAP-PEAP], but any installed client certificates and client private keys are also deleted. Important
  • Canon VB-S31D | User Manual - Page 69
    is 4 always 1 fps. • When a network error occurs during recording-mode stream, video is camera at the time of booting. For inserting and removing the memory card, see "Installation Guide intelligent function event occurrence (p. 77) - When manually recorded to memory card from the Admin Viewer
  • Canon VB-S31D | User Manual - Page 70
    the memory card. Important Be sure to perform the unmount process when turning off the power to the camera or removing the memory card. Failing to unmount first may result in management file problems or the memory card becoming inaccessible. You can use the Memory Card Unmount Tool (p. 15) to mount
  • Canon VB-S31D | User Manual - Page 71
    Important Information recorded to the memory card may be regarded as "personal information". Take sufficient precautions for handling this information when releasing to third parties for disposal, transfer or repair. Note For accessing files saved to the memory card, see "Memory Card Access" (p. 142
  • Canon VB-S31D | User Manual - Page 72
    LAN] LAN interface, maximum packet size settings (p. 37) (2) [IPv4] IP address, IPv4 settings, etc. (p. 37) (3) [IPv6] Settings regarding network connectivity. If any setting is changed to a value that may disable camera connection from the active web browser, a dialog box appears and alerts the user
  • Canon VB-S31D | User Manual - Page 73
    p. 92 for details on registering a home position. (4) [Restore Default Settings] Except for the following items, all user-defined settings will be discarded and restored to factory default settings after the camera is rebooted. - Network administrator password, LAN, IPv4, IPv6 - Date and time - Host
  • Canon VB-S31D | User Manual - Page 74
    be operated from the Setting menu only on the VB-S800D/VB-S900F. It cannot be operated from Admin Viewer or VB Viewer. • Connecting to the camera from the [Camera Angle] menu will disconnect connections from each type of viewer and recording software that are not connected via RTP. • The higher the
  • Canon VB-S31D | User Manual - Page 75
    5 Chapter Admin Tools ❏ Privacy Mask Setting ❏ Panorama Image Registration ❏ View Restriction Setting ❏ Camera Preset Setting ❏ Intelligent Function Setting ❏ Viewing Logs ❏ Managing Memory Card Video
  • Canon VB-S31D | User Manual - Page 76
    panorama image creation tool that shows the entire area that can be captured by this camera. Once a panorama image is captured and registered, it is shown in the panorama Restriction Tool restricts the viewable capture range in the VB Viewer. You can set the desired range with the mouse by referring to
  • Canon VB-S31D | User Manual - Page 77
    preview in panorama or full video mode. Admin Tools Overview Log Viewer (p. 109) This viewer shows the logs of operating conditions of the camera. 5 Admin Tools Intelligent Function Setting Tool (p. 97) This tool is used to set intelligent functions that perform uploads, notify the viewer, record
  • Canon VB-S31D | User Manual - Page 78
    the camera. 1 Start the top page of the camera (p. 32). 2 Click [Admin Tools]. A user authentication window appears. 3 Enter a user name and password and click of the Admin Tools, wait about 5 to 10 seconds until the software is downloaded to your computer. From then on, launching will be quicker
  • Canon VB-S31D | User Manual - Page 79
    mouse operation in the video display area changes. When the button is set to , privacy masks can be resized/moved. While in this mode, the camera orientation will not change. When the button is set to , pan/tilt operations can be performed. (3) [Switch Screen Size] button Each time this button is
  • Canon VB-S31D | User Manual - Page 80
    , click [Restore settings]. 3 Click [Quick add] to save the privacy mask area. The set privacy mask area is saved in the camera. You can set up to eight privacy masks. Repeat the setting operations to set multiple privacy mask areas. 4 Confirm privacy mask areas. Saved privacy mask
  • Canon VB-S31D | User Manual - Page 81
    filled with color. Privacy masks that are not selected are shown in a hatched frame. (4) Maximum Wide-angle Area This is the visible area when the camera is at maximum wide-angle. This area is only shown when a privacy mask area (3) is being dragged. • Set the privacy mask area to a somewhat larger
  • Canon VB-S31D | User Manual - Page 82
    ]. Enter a value for the [Privacy Mask Position and Size] and click [Preview settings] to check the position and size of the preview frame. Click [Get camera position] to load the current pan, tilt, and zoom settings. Note Select a disabled privacy mask and click [Quick change] to enable it. How to
  • Canon VB-S31D | User Manual - Page 83
    of the entire area the set area is occupying. 5 Admin Tools Create/capture a panorama image with the Panorama Creation Tool and save it in the camera. Admin Viewer Preset Setting Tool You can see at a glance which part of the entire area the displayed area is occupying. Important If the privacy
  • Canon VB-S31D | User Manual - Page 84
    (9) (1) [Load from camera] Show the panorama image saved in the camera. (2) [Save to camera] Save the currently shown panorama image in the camera. (3) [Load from file for [Exposure Lock], [White Balance Lock], and [Focus Lock] (VB-S30D only) as necessary. To stop the capture when underway, click [
  • Canon VB-S31D | User Manual - Page 85
    file in and enter the file name in the displayed dialog box. Camera Admin Tools After creating the panorama image, it is sent to and saved on the camera to update the camera's panorama image. How to Save Click [Save to camera], and then click [OK] in the displayed dialog box. The panorama image
  • Canon VB-S31D | User Manual - Page 86
    a tool that limits the range that can be captured by the camera. If view restrictions have been set, you can limit the displayable capture cases. • When the Admin Viewer is accessed with authorized user authorities • When the VB Viewer is accessed • When accessed via the Intelligent Function Setting
  • Canon VB-S31D | User Manual - Page 87
    ] You can enter a value in each view restriction setting entry box to change the applicable setting. You can load the values for the current camera angle to the view restriction settings by clicking [Get value]. • View restriction settings [Upper Limit]: Top limit of the view restriction. Click [Get
  • Canon VB-S31D | User Manual - Page 88
    screen. At this point, the settings are not yet saved in the camera. Be sure to click [Save settings]. (11)[Restore settings] Clear the settings sure to confirm with the VB Viewer that the view restrictions have been reflected correctly. • Confirm the settings using the VB Viewer. (View restrictions are
  • Canon VB-S31D | User Manual - Page 89
    operating angle Captured video range • If the view restriction will be exceeded as a result of controlling the zoom toward maximum wide-angle, the camera will first pan and tilt to a position where the maximum wide-angle zoom will be within the viewing restriction area. Wide-angle zoom control
  • Canon VB-S31D | User Manual - Page 90
    you want to use intelligent functions. • The camera angle will be as follows when the camera is rebooted: Home position registered: Camera angle will move to the home position Home position not registered: Camera angle will move to the factory default home position • Presets that were set with the
  • Canon VB-S31D | User Manual - Page 91
    . The display is grayed out if [Smart Shade Control] is set to [Auto]. • [Focus Mode] Select [Auto], [Manual], or [Fixed at infinity] for the focus mode of the camera. (p. 135) • [Smart Shade Control] Select [OFF], a level from [1] (Mild) to [7] (Strong) or [Auto] for the smart shade control setting
  • Canon VB-S31D | User Manual - Page 92
    [Manual], set the respective gains to a value between 0 and 1023. (11)[Get camera info] Load the current camera angle of the video display area, or the [Focus] (VB-S30D only the preset preview frame on [Full Image]. (16)[Get Digital PTZ Info] Load the current crop position of the video display area
  • Canon VB-S31D | User Manual - Page 93
    Using the Digital PTZ Function to Set Presets Use the Digital PTZ function to set part of the area that can be captured by the camera as a preset. incorrect settings, etc., and want to restore the settings registered in the camera, click [Restore settings]. 5 Click [Save settings]. 3 Change the
  • Canon VB-S31D | User Manual - Page 94
    cannot be set in the digital zoom area. 2 Click [Get camera info]. The camera parameters in the video display area are loaded to [Detailed Settings]. 3 Fine-tune the camera angle and adjust the video quality with focus (VB-S30D only) or smart shade control while checking the video. 4 Click
  • Canon VB-S31D | User Manual - Page 95
    perform a preset tour from the following options. [Not used] Preset tour is not performed. [For Viewers] Preset tour is performed when a camera is connected via the VB Viewer, etc. [Always] Preset tour is always performed. (2) [Set Preset Tour Time] checkbox This setting is enabled when [For Viewers
  • Canon VB-S31D | User Manual - Page 96
    5 Click [Save settings]. When you complete setting the tour schedule list, click [Save settings]. The settings are saved in the camera. Note The home position cannot be added to the tour schedule list. 96
  • Canon VB-S31D | User Manual - Page 97
    a change has occurred in the captured video due to movement of a subject. Camera Tampering Detection Moving Object Detection Volume Detection Camera E-mail notification 5 Admin Tools Network Admin Viewer RM Viewer Passing Detection Abandoned Object Detection Removed Object Detection Video
  • Canon VB-S31D | User Manual - Page 98
    Detection Detect when the capture is being obstructed. This function can be used to detect when the camera orientation is changed or the video display is obstructed with spray, etc. Camera tampering detection is triggered when an area exceeding the set ratio is continuously altered by an object
  • Canon VB-S31D | User Manual - Page 99
    Event] > [Volume Detection] (p. 56). Caution Notes on Use of This Camera The intelligent functions are not suitable for applications where high reliability is required. surveillance it is not recommended that you use this function. Canon shall assume no liability for any accident, loss or other
  • Canon VB-S31D | User Manual - Page 100
    the same as in the Admin Viewer. For details, see "How to Operate the Viewer" (p. 124). However, when the (11) [Lock camera position] checkbox is selected, the camera is fixed at a preset position and cannot perform pan, tilt, and zoom operations. (2) [Switch Mouse Operation] button Each time this
  • Canon VB-S31D | User Manual - Page 101
    restriction presets or the home position. Use the Preset Setting Tool to set presets or the home position (p. 90). If camera control privileges are not obtained, the [Lock camera position] checkbox is not selected, or if the preset position is not set within the view restriction area, this function
  • Canon VB-S31D | User Manual - Page 102
    104). 5 Save the detection settings in the camera. Click [Save settings] to save the settings in the camera. 6 Check the detection result. You can page is changed, be sure to change the preset position setting (VB-S30D/VBS31D only) and intelligent function settings, and check the operation. The
  • Canon VB-S31D | User Manual - Page 103
    the video in the video display area. [Detection Criteria] tab Moving object detection, abandoned object detection, camera tampering detection (1) (2) (3) (4) Removed object detection (1) (2) (3) (4) Passing detection (1) (5) (3) (6) (7) (4) Intelligent Function Setting Tool Video Display Area
  • Canon VB-S31D | User Manual - Page 104
    Important It is recommended that the detection criteria are set in a condition as close as possible to the condition in which the camera is actually used. Perform a detection test in advance to make sure that the detection frame continues to be displayed for a subject targeted for passing detection.
  • Canon VB-S31D | User Manual - Page 105
    • Click [Clear] to delete the polygonal detection area. • The camera tampering detection area cannot be changed. Changing a [Rectangular] detection area size of the detection area. When the ratio of an area where the camera has detected a moving object exceeds the value set for [Object Size (%)],
  • Canon VB-S31D | User Manual - Page 106
    be obstructed is displayed for 1 second in the center of the video display area. This allows you to check the change ratio of the camera tampering detection area, which occupies the entire video display area, while specifying the [Change Ratio (%)] setting. For [Duration (Sec)], set the time that
  • Canon VB-S31D | User Manual - Page 107
    setting selected. [Paste detection area/line] Paste the copied detection area/line to the detection setting selected. It cannot be copied to camera tampering detection. Pasting a detection line is possible only when the source and the target both set passing detection. [Clear detection area/line
  • Canon VB-S31D | User Manual - Page 108
    this effect. 1 Click [Detection Settings]. 2 Select [Reduce effects of lighting change]. Note If the detection setting is not stored in the camera, only the detection status for the currently selected detection setting is displayed. 3 Click [Save settings]. Important A [Reduce effects of lighting
  • Canon VB-S31D | User Manual - Page 109
    or memory cards. (2) [Reload] Reload the displayed log file and show the latest logs. (3) [Previous File] If there are multiple log files in the camera's internal memory or memory card, load and display the file before the currently shown log list. (4) [Next File] If there are multiple log files in
  • Canon VB-S31D | User Manual - Page 110
    (13)[Date & Time] Set the date and time of the log you want to show using the filter function. Select the [Specify start date & time] or [Specify end date & time] checkbox to set the date and time. (14)[Apply filter] Show the filtered logs in the log display area. (15)[Search for] Enter the
  • Canon VB-S31D | User Manual - Page 111
    and time are shown. Important Logs saved in the camera's internal memory are cleared when you perform [Maintenance] > [Restore Default Settings] and [Reboot], or press the reset switch on the camera. Note [Application], [HTTP Server], and [System] support the List of Log Messages (p. 148). 111
  • Canon VB-S31D | User Manual - Page 112
    in the [Playback Videos] area (p. 115). (8) Video List Displays a list of videos recorded on a memory card and downloaded to a computer. (9) [Delete from Camera] Delete videos selected in the video list from the memory card. (10)[Download] Download videos selected in the video list to a computer
  • Canon VB-S31D | User Manual - Page 113
    Select [Specified] and select the checkboxes for the type of video recording ([Upload], [Recording-Mode Stream], [Manual], [Timer], [Event]) (multiple selections possible). [Video in Camera] Select [Not specified], [Yes] or [No]. [Download Status] Select [Specified] and select the checkboxes for the
  • Canon VB-S31D | User Manual - Page 114
    name as the camera IP address. After copying, start up the Recorded Video Utility, click [Refresh Download Status] and the manually copied files will Windows Vista and earlier, use QuickTime. However, playback when using this software is not guaranteed. • A recorded JPEG video whose size is changed
  • Canon VB-S31D | User Manual - Page 115
    H.264 video in the [Playback Videos] area. The Software Product License Agreement dialog box appears. Click [Yes] agreement. The decoder is downloaded from the camera, enabling H.264 video playback. [Recording Date when switching files, depending on the network environment. • [Not Downloaded] or
  • Canon VB-S31D | User Manual - Page 116
    Videos You can delete videos from a memory card. 1 Select a video to delete in the video list. 2 Click [Delete from Camera]. The video is deleted from the camera. Note If the selected videos contain [Not Downloaded] videos, a message prompting you to confirm deletion appears. Click [OK] to delete
  • Canon VB-S31D | User Manual - Page 117
    will open or close the setting items. ⇔ The Admin Control Panel will appear and you can open the various control items even without obtaining the camera control privileges, but the items will be grayed out. [Smart Shade Control] You can set Smart Shade Control. For details, see "Setting the Smart
  • Canon VB-S31D | User Manual - Page 118
    118
  • Canon VB-S31D | User Manual - Page 119
    6 Chapter Admin Viewer/VB Viewer ❏ Differences between the Admin Viewer and the VB Viewer ❏ User Authorities and Camera Control Privileges ❏ Viewer Startup and Operation ❏ Camera Control and Obtaining Camera Control Privileges ❏ Admin Viewer Operation and Settings
  • Canon VB-S31D | User Manual - Page 120
    controls are different. Admin Viewer: Users with privileged camera control can use this viewer. Password authentication is required. Authorized users must have privileged camera control assigned by the Administrator beforehand (p. 60). VB Viewer: Users with camera control authority can use this
  • Canon VB-S31D | User Manual - Page 121
    Pan/tilt/zoom camera control Digital PTZ Guest users can launch the VB Viewer from the [VB Viewer] link on the top page. The Administrator can completely prohibit all camera access from guest users Note • The factory default setting gives privileged camera control to [Authorized User] as well. by
  • Canon VB-S31D | User Manual - Page 122
    mode, reconnect, audio reception, get a snapshot Panorama display Digital PTZ Video size, video display size, full screen mode, reconnect, get a snapshot Panorama display Digital PTZ *1 PTZ: Pan, tilt, zoom *2 If video distribution authority is disabled, users can no longer use VB Viewer. 122
  • Canon VB-S31D | User Manual - Page 123
    Guide explains relevant operations based on the IP address "192.168.100.1" (factory default setting). You 6 must enter the actual IP address set for the camera when following instructions. Admin Viewer/VB the Camera" > "User Authentication" (p. 32) for information on the user name and password.
  • Canon VB-S31D | User Manual - Page 124
    size of the video shown on the screen. (4) [Full Screen Mode] button Live video is shown in full screen mode. (5) [Reconnect] button The camera is reconnected. (6) [Audio Reception] button Displays the Receive Audio panel. 124 (7) Slider for tilt This slider is used to control the tilt (vertical
  • Canon VB-S31D | User Manual - Page 125
    camera control privileges. (27)Digital PTZ Panel This panel is displayed upon clicking the [Digital PTZ] button. (12)Information Field Information messages, warning messages and error messages are shown to the user. (28)Digital PTZ )[Viewer PTZ] button The viewer PTZ panel is displayed. VB Viewer
  • Canon VB-S31D | User Manual - Page 126
    video display area to crop with Digital PTZ. Obtaining Camera Control Privileges The camera cannot be controlled by multiple users simultaneously. Only the user with the control privileges can control the camera. To perform backlight compensation camera control, you must obtain control privileges
  • Canon VB-S31D | User Manual - Page 127
    the view restrictions. Users operating the camera in the Admin Viewer with the authorized user authorities can control the camera only within the view restrictions. • Users operating the camera in the VB Viewer can control the camera within the view restrictions. „ Changing the Camera Angle You can
  • Canon VB-S31D | User Manual - Page 128
    area in the changed frame. Note Zoom refers to digital zoom only. Cropping and Displaying Part of Video (Digital PTZ) You can use the Digital PTZ panel to crop and display part of a camera video in the video display area. It is also possible to use a preset or home position registered to the
  • Canon VB-S31D | User Manual - Page 129
    . How to Operate the Viewer 6 Admin Viewer/VB Viewer The appearance of the [Digital PTZ] button differs as follows depending on the state of the Digital PTZ function. Digital PTZ is disabled (displays the scene as seen by the camera). Digital PTZ is enabled (displays trimmed video). „ Specifying
  • Canon VB-S31D | User Manual - Page 130
    the [Home Position] button to move the preview frame on the Digital PTZ panel to the home position and display the video inside the frame in When the VB Viewer is launched, the video size set for the camera is applied. When the Admin Viewer is launched for the first time, the camera settings are
  • Canon VB-S31D | User Manual - Page 131
    Admin Viewer/VB Viewer [Start/Stop Control] Obtain and release the camera control privileges. [Preset] Select a preset. [Home Position] Move the camera angle to the home position. [Panorama] Displays the panorama display panel. [Start/Exit Viewer PTZ] The viewer PTZ panel is displayed
  • Canon VB-S31D | User Manual - Page 132
    time the Receive Audio panel is launched from the VB Viewer, a message to install the "Canon Network Camera Audio Receiver" add-on will be displayed in the camera information • Pan, tilt, and zoom information for Digital PTZ (Yellow) Warning A message will appear notifying the user when camera
  • Canon VB-S31D | User Manual - Page 133
    during use of an intelligent function. Admin Viewer/VB Viewer Important When the Viewer PTZ function is used, you cannot operate the camera by clicking the video display area. Note • Video cropped with Viewer PTZ will not be videos recorded manually, or by event or timer. • The cropped position
  • Canon VB-S31D | User Manual - Page 134
    the entire area that can be captured by the camera. The size of the received data The size of the received data is large. is small. Can be used only in Admin Viewer. Can be used in both Admin Viewer and VB Viewer. PTZ operation can be performed independently for each viewer. Independent
  • Canon VB-S31D | User Manual - Page 135
    Manual], set one of the 7 levels from [1] (Mild) to [7] (Strong). Admin Viewer/VB Viewer [Auto] : Automatically focuses on the [Manual] subject. : You can adjust the focus manually in the viewers of other users also. • Setting the shutter speed at [1/1 sec] in manual exposure (p. 135) will
  • Canon VB-S31D | User Manual - Page 136
    to [Auto]. • The [BLC] button is not available if [Exposure] is set to [Manual]. • Even if [Exposure] is set to [Auto (Flickerless)], some screen flicker may still occur under unstable light source conditions. • When [Camera] > [Camera Control] > [AGC Limit] is set to [OFF] and [Exposure] is set to
  • Canon VB-S31D | User Manual - Page 137
    due to infrared light as the camera does not have an insertion/removal mechanism for the filter. Admin Viewer/VB Viewer Important • Since the light By registering settings for camera position, exposure, white balance, etc. beforehand, you can load settings using manual or automatic control. Note
  • Canon VB-S31D | User Manual - Page 138
    the custom setting you want to register from the selection box. (4) [Include Current PTZ Position] checkbox Select the checkbox to register the current pan, tilt, and zoom settings. (5) [Register] Register the current camera settings in the custom setting number selected in [Register to]. (6) [Auto
  • Canon VB-S31D | User Manual - Page 139
    function. (2) (1) (3) 6 (2) Admin Viewer/VB Viewer (1) [Noise Reduction] Select [Mild], [Standard checkbox Select to receive H.264 video. The Software Product License Agreement dialog box appears. Click [Yes . The decoder is downloaded from the camera, enabling H.264 video reception. Input
  • Canon VB-S31D | User Manual - Page 140
    ] > [JPEG] > [Video Size: Upload / Memory card] H.264 [Video] > [H.264(1)] > [Video Size] „ Recording Videos Manually 1 If you have not yet obtained the camera control privileges, click the [Obtain/Release Camera Control] button and obtain the control privileges. 2 Click the [Start/Stop Memory Card
  • Canon VB-S31D | User Manual - Page 141
    7 Chapter Appendix ❏ Memory Card Access ❏ Modifiers ❏ Troubleshooting ❏ List of Log Messages ❏ List of Viewer Messages ❏ Restore Default Settings ❏ List of Factory Default Settings ❏ Specifications ❏ Index
  • Canon VB-S31D | User Manual - Page 142
    ) to access the camera using the camera's IP address. FTP Software Settings Address: Camera IP address User ID: Administrator user ID Password: Administrator password (factory default setting: 192.168.100.1) (factory default setting: root) (factory default setting: camera) Important • When
  • Canon VB-S31D | User Manual - Page 143
    Memory Card Access „ File Name Format for Data Downloaded with Recorded Video Utility Example: Video, manually recorded on Sept. 10, 2013, starting from 16:06:19 (Camera Time Zone: GMT+09:00). 20130910 070618-070619- M 00 _ 507.mov (1) (2) (3) (4) (1) Video recording date (2) File creation
  • Canon VB-S31D | User Manual - Page 144
    (alphanumeric characters)] %P Pan position -174.99 - 175.00 0 %T Tilt position -90.00 - 0.00 0 %Z Zoom position 0.01 - 300.00 0 %V Camera server VB-S30D/VB-S31D/VB-S800D/VB-S900F %y Year of capture time 2001 - 2031 %m Month of capture time 01 - 12 %d Day of capture time 01
  • Canon VB-S31D | User Manual - Page 145
    „ Available Modifiers The modifiers that can be used for each setting item are specified below. [HTTP Upload] (p. 52) [Parameter (query string)] All modifiers can be used. [FTP Upload] (p. 52) [Subdirectory Name to Create] Only the modifiers %y,%m,%d,%w,%H,%h,%n can be used. [File Name to Create]
  • Canon VB-S31D | User Manual - Page 146
    connected correctly. • Check if the network to which the camera is connected is set up correctly. In particular, check if the IP address, subnet mask and default gateway address are set within the ranges supported by the applicable network. • If you have changed the IP address, the new address will
  • Canon VB-S31D | User Manual - Page 147
    connect again. You forgot your password. • You can initialize all settings of the camera excluding date and time using the reset switch (p. 159). The administrator password required for initialization is "camera". Note, however, that network settings such as the IP address and subnet mask will be
  • Canon VB-S31D | User Manual - Page 148
    to external memory. W101 Invalid user name [notice] Description user not found (W101) Meaning The camera was accessed by an unauthorized user. W102 Invalid password [notice] Description user password mismatch (W102) Meaning The password is invalid W130 Buffer
  • Canon VB-S31D | User Manual - Page 149
    List of Log Messages „ Application (Uploader) Messages A004 Starting and stopping of uploader [info] Description %1 uploader (A004) %1 Starting or stopping Meaning The uploader was started or stopped. A040 Number of uploads (MAIL) [notice] Description uploader mail: normal=%1 test=%2 (
  • Canon VB-S31D | User Manual - Page 150
    host IP address user name, password or user list used when connecting. 42: Check playtime or maximum connection time settings used when connecting. 43: Reconnect or restart. 45: Use supported client software. 47: Check user problem persists after rebooting, the camera is faulty. Arrange for servicing
  • Canon VB-S31D | User Manual - Page 151
    fail. (V321) Meaning An error occurred in the pseudo mode setting of intelligent service. Countermeasure If the problem persists after rebooting, the camera is faulty. Arrange for servicing. V403 Video input error [crit] Description video %1 fatal error - %2 (V403) %1 Video number %2 Error
  • Canon VB-S31D | User Manual - Page 152
    ) for sending the camera control command. „ HTTP Server Messages H143 User name specification error [notice] Description (http_auth.c.XXX) get_password failed, IP:%1 (H143) %1 IP address Meaning An unknown user was specified in user authentication. H144 Password specification error [notice
  • Canon VB-S31D | User Manual - Page 153
    files in the user memory area, 7 service [err] Description cannot work event [%1] [%2] [%3] (S310) %1 Error number %2 Cause of error %3 Error information Meaning An error occurred while the event service was running. Countermeasure If the problem persists after rebooting, the camera
  • Canon VB-S31D | User Manual - Page 154
    timer service. Countermeasure If the problem persists after rebooting, the camera is faulty. Arrange for servicing. S413 Timer service runtime RTSP PLAY request received [info] Description PLAY received: client_IP=%1, profile=%2, num_of_sessions=%3(V=%4,A=%5, M=%6,BC=%7) (R003) %1 Client IP
  • Canon VB-S31D | User Manual - Page 155
    Client IP address Description Meaning RTSP authorization error (R103) RTSP authentication has failed. R107 RTSP authentication Session ID Countermeasure If the problem persists after repeated attempts and rebooting, the camera may be faulty. Arrange for servicing. Meaning RTP session has timed
  • Canon VB-S31D | User Manual - Page 156
    : User account IP_address: IP address of the camera profile_media_configuration: MediaConfiguration information RTSP_port_number: RTSP port disconnected [err] Description connection reset by peer: client_IP=client_IP=%1 (R304) %1 Client IP address Meaning Disconnected from client
  • Canon VB-S31D | User Manual - Page 157
    information from the camera are shown. Warning Message Error Message A message will be displayed notifying the user when camera control privileges cannot was completed successfully When the password of the account used to connect to the camera was changed during camera connection and then any WV-
  • Canon VB-S31D | User Manual - Page 158
    camera is not a network camera, or it is not Displayed when connecting to a camera other than the specified camera a supported model. using admin tool with proxy authentication support. User authentication failed. Camera . Failed to initialize Canon Network Camera Audio Receiver. ActiveX plugin
  • Canon VB-S31D | User Manual - Page 159
    . To restore the default settings, click [OK]. If you have forgotten or do not know the IP address of the camera or your Administrator password, you cannot operate the camera via the network. In this case, press the reset switch at the back of the camera. 1 For VB-S30D/VB-S31D/VB-S800D, remove the
  • Canon VB-S31D | User Manual - Page 160
    set an IP address appropriate for the environment in which the camera is used (See "Performing Initial Settings for the Camera" (p. 28)). 4 For VB-S30D/VB-S31D/VB-S800D, attach the top cover. For top cover attachment, see the "Installation Guide" included with the camera. Reset Switch Reset Switch
  • Canon VB-S31D | User Manual - Page 161
    Name Administrator Contact Information Administration Function Name Setting root camera admin Auto 1500 Manual 192.168.100.1 255.255.255.0 Enable Enable Enable Enable 64 Disable Disable Disable public VB-S30D VB-S31D VB-S800D VB-S900F Item Setting Installation Location • Current Date and Time
  • Canon VB-S31D | User Manual - Page 162
    No Restriction Camera Position without Control 960 x 540 3 Video Quality: 1920 x 1080 3 Video Quality: Digital PTZ 3 Video Size: video Transmission 480 x 270 Maximum Frame Rate: Video 30 RTP Server RTP Enable RTSP Authentication Method Digest Authentication RTSP Port 554 • Audio
  • Canon VB-S31D | User Manual - Page 163
    Loops 0 • E-mail Notification List of Factory Default Settings Item Setting Notification Text Only Mail Server User Name POP Server Subject Message Body 7 • Video Server Appendix Maximum Number of Clients 30 Camera Control Queue Length 30 Maximum Connection Time 0 (sec.) Camera
  • Canon VB-S31D | User Manual - Page 164
    Distribution Checked Audio Distribution Checked Guest user Camera Control Checked Video Distribution Checked Audio Distribution Checked • IPv4 Host Access Restrictions Apply Host Access Restrictions Disable Default Policy Authorize Access Network Address / Subnet 01: / 32 Yes 02
  • Canon VB-S31D | User Manual - Page 165
    Setting 16: / 32 Yes 17: / 32 Yes 18: / 32 Yes 19: / 32 Yes 20: / 32 Yes • IPv6 Host Access Restrictions Apply Host Access Restrictions Disable Default Policy Authorize Access Prefix / Prefix Length 01: / 128 Yes 02: / 128 Yes 03: / 128 Yes 04: / 128 Yes 05: / 128 Yes 06: / 128 Yes
  • Canon VB-S31D | User Manual - Page 166
    Item Setting Destination Prefix Length 16 IKE Pre-Shared Key SA ESP Encryption Algorithm AES SA ESP Authentication Algorithm HMAC_SHA1_96 SA ESP Encryption Key (outbound) SA ESP Authentication Key (outbound) SA ESP SPI (outbound) SA ESP Encryption Key (inbound) SA ESP Authentication Key
  • Canon VB-S31D | User Manual - Page 167
    • Encrypted Communications SSL Communications Disable List of Factory Default Settings Item Setting • 802.1X Authentication 802.1X Authentication Status Stop • Authentication Method Authentication Method EAP-MD5 User Name • Memory Card Operations Operation Settings Save Logs and
  • Canon VB-S31D | User Manual - Page 168
    Specifications Camera Image Sensor Number of Effective Pixels Scanning Method (T) Vertical: 40.4° (W) to 11.6° (T) Horizontal: 95.0° Vertical: 60.0° Horizontal: 96.0° Vertical: 60.5° Auto/Manual Day Mode (color) 0.95 lux (F1.4, shutter speed 1/30 sec., smart shade control off, 50IRE) 0.07 lux
  • Canon VB-S31D | User Manual - Page 169
    password), Host Access Restrictions (IPv4, IPv6) SSL/TLS, IPsec (Auto Key Exchange/Manual) EAP-MD5, EAP-TLS, EAP-TTLS, EAP-PEAP IPv4: TCP/IP, UDP, HTTP, FTP, SNMP (MIB2), SMTP (Client), DHCP (Client), DNS (Client), ARP, ICMP, POP3, NTP, SMTP authentication, RTSP, WV-HTTP (Canon proprietary), ONVIF
  • Canon VB-S31D | User Manual - Page 170
    JPEG) Max. 30 fps (H.264) Event Notifications HTTP/SMTP (e-mail) Camera Angle Settings Available Image Cropping Function Digital PTZ Cropping sizes: 640 x 360/512 x 288/384 x 216/256 /Spanish/French/Italian/Japanese "ONVIF" is a trademark of ONVIF Inc. Interface Network Terminal *3 LAN x 1
  • Canon VB-S31D | User Manual - Page 171
    maximum wide angle, (T): maximum telephoto *2 Distribution capability values of the camera. The actual frame rate may drop depending on the performance of the Viewer, the number of clients connected at the same time, network load, video quality settings, and photographic subject. *3 LAN cables
  • Canon VB-S31D | User Manual - Page 172
    Administrator Password User Default Gateway Address 37 Delete Videos 70 Detect Criteria 56 Detection Area 104 Detection Criteria 103, 105 Detection Line 105 Detection Setting 108 Detection Type 102, 105 Device Information 73 Device Name 45 DHCP 37 Digest Authentication 55 Digital PTZ
  • Canon VB-S31D | User Manual - Page 173
    139 Information Field 132 Information Message 157 Initial Camera Settings 42 Initial Settings 28, 159 Input Volume 54 Installation Conditions 45 Installation Guide 5 Installing the Necessary Software 26 Intelligent Function Setting Tool 97 IP Address 28, 37 IPsec 62 IPsec Set 62
  • Canon VB-S31D | User Manual - Page 174
    95 Privacy Mask Setting Tool 79 Privileged Camera Control 60, 120 Pulse 57 R Reboot Item 72 Reconnect 131 Recorded Video Utility 112, 140 Recording Manually 140 Reference Volume Level 56 Removed Object Detection 106 Reset Switch 159 Restore Default Settings 73 Restore Settings 73 RM-Lite
  • Canon VB-S31D | User Manual - Page 175
    Server 54 Video Size 46, 130 Video Size Set 46 View Restriction Setting Tool 86 Viewer Admin Viewer 133 RM-Lite Viewer 17 VB Viewer 125 Viewer PTZ 133 Voice Activity Detection 54 Volume Detection 56, 140 W Warning Message 158 White Balance 43, 136 Z Zoom 74, 128, 134 Index 7 Appendix
  • Canon VB-S31D | User Manual - Page 176
    BIE-7001-001 © CANON INC. 2014
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
ENGLISH
Network Camera
Network Camera
Operation Guide
Be sure to read this Operation Guide before using the network camera.