Canon VB-S805D Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9
Canon VB-S805D Manual
View all Canon VB-S805D manuals
Add to My Manuals
Save this manual to your list of manuals |
Canon VB-S805D manual content summary:
- Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 1
Network Camera NOetpwoerkraCatmioerna Guide Be sure to read this User Manual before using the network camera. ENGLISH - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 2
manuals, operating environment, etc.), please refer to the Canon Web Site. Disclaimer To the full extent permitted by laws and regulations, neither Canon THE CAMERA. Notes 1 All rights reserved. 2 The contents of this guide are subject to change without any prior notice. 3 This document has been - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 3
. • Other brands or product names in this guide are trademarks or registered trademarks of their respective companies problems with RM-Lite may result in recording failure or destruction or loss of recorded data. Canon or your household waste disposal service or visit www.canon-europe.com/weee, or - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 4
the same folder. Software under GPL and LGPL If you would like to obtain the source code under GPL/ LGPL, please contact us at [email protected] and provide the following information in English or Japanese: 1. Product name and firmware version. 2. Name of the software module or modules you would - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 5
be used to indicate those models. Icon Camera Model VB-S30D VB-S31D VB-S800D, VB-S805D VB-S900F, VB-S905F Symbols Indicating Safety Precautions This section explains symbols used in this Operation Guide. This Operation Guide uses the following symbols to indicate important information the - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 6
instructions without fail. Important Warnings Caution TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE Camera, Model Name: VB-S30D/VB-S31D/ VB-S800D/VB-S900F/VB-S805D/VB-S905F This device complies with Part - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 7
This may cause malfunction. This installation should be made by a qualified service person and should conform to all local codes. Precautions for Use of guarantee high-precision capture and cannot support applications beyond their intended range of use. Canon will assume no liability for any - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 8
, remove it following the steps below to clean it more thoroughly. 1 Remove the top cover. See steps in "Installing the Camera" in the "Installation Guide" included with the camera to remove the top cover. 2 Dampen a soft cloth with water or diluted neutral detergent and wipe away the grime gently - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 9
...4 How to Read This Operation Guide 5 User Manuals ...5 How to Use This Operation Guide 5 Icons Indicating Particular Camera Models 15 RM-Lite (Please Refer to the "Administrator Manual 17 Operating Environment 18 Admin Viewer/VB Viewer, Admin Tools 18 Notes on Operating Environment 19 - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 10
Chapter 2 Initial Settings Preparing the Camera for Use 24 Installing the Necessary Software 26 Making Initial Camera Settings 28 Launch the Camera Management Tool 28 Searching for Cameras and Setting up Networks 28 Set the Password, Date and Time, Camera Name and Video 29 Registering Camera - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 11
Table of Contents Chapter 4 Admin Tools Admin Tools Overview 82 Admin Tools ...82 Privacy Mask Setting Tool ...82 Panorama Creation Tool ...82 View Restriction Setting Tool 82 Preset Setting Tool ...83 Intelligent Function Setting Tool 83 Log Viewer ...83 Recorded Video Utility ...83 Accessing - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 12
to Operate the Viewer 129 Display Screens of Admin Viewer 129 VB Viewer ...130 Obtaining Camera Control Privileges 131 Controlling the Camera ... 146 Recording to a Memory Card Manually 147 Chapter 6 Appendix Memory Card Access 150 Modifiers ...152 Troubleshooting ...154 List of Log Messages - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 13
1 Chapter Before Use ❏ Camera Features ❏ Software Information ❏ Operating Environment and Precautions - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 14
as JPEG or H.264 files to memory cards (manual, timer, and event recording are supported). Recorded Video Utility in Admin Tools allows you to the VB-S805D/VB-S905F is 1.3M. *2 For the VB-S805D/VB-S905F, video sizes can be selected from 720p and 4:3 categories (two categories). *3 In this manual, the - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 15
Viewer for Administrators. The VB Viewer allows users to configure purchase additional licenses as necessary. Canon H.264 Additional User License AULVB By using multiple Storage Servers, you can construct a surveillance system supporting up to 512 cameras. Note Licenses for upgrading from RM-9 - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 16
RM-V This additional license lets you install RM-64/RM-25/RM-9 RM Manager and Viewer on multiple computers. Purchase the license to be able to view video captured by the camera from multiple sites and for other similar purposes. RM-Lite-V This additional license lets you install the RM-Lite - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 17
Supported cameras VB-R11VE, VB-R11, VB-R10VE, VB-M641VE, VB-M641V, VB-M640VE, VB-M640V, VB-M741LE, VB-M740E, VB-H43, VB-H630VE, VB-H630D, VB-H730F, VB-M42, VB-M620VE, VB-M620D, VB-M720F, VB-S30D, VB-S31D, VB-S800D, VB-S900F, VB-S805D, VB-S905F, VB-H41, VB-H610VE, VB-H610D, VB-H710F, VB-M40, VB - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 18
software, user manuals, operating environment, etc.), please refer to the Canon Web Site. Admin Viewer/VB Viewer, Admin Windows Server 2008 R2 systems When using the camera's audio feature, the computer audio support feature is required. *1 Set the Control Panel's font size (DPI) for Admin Tools - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 19
set to [High] by default. Thus, when accessing the Admin Viewer/VB Viewer, the camera's Setting Page or the Admin Tools, a content block dialog box appears and the page fails to display correctly. To correct this problem, follow the procedure below to register the top page as a trusted site. - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 20
operations may display the content block dialog box and prevent further operation. • Startup of Admin Tools or Admin Viewer • Audio reception from VB Viewer This happens when Internet Explorer Enhanced Security Configuration (IE ESC) is enabled in Internet Explorer 9/ 10/11. Use the procedures below - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 21
audio device has been installed. (If no audio device is installed, refer to your computer manual.) Enabling the Sound Function to Use Audio In Windows Server 2008/Windows Server 2012, , double-click [Sound]. 2 Click [Sound]. 3 When the [Audio Service Not Running] message appears, click [Yes]. 21 - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 22
22 - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 23
2 Chapter Initial Settings ❏ Preparing the Camera for Use ❏ Installing the Necessary Software ❏ Initial Settings ❏ Access the Top Page of the Camera to Check Video - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 24
are complete, access the camera via a web browser and check the video using the VB Viewer. "Access the Top Page of the Camera to Check Video" (p. 31) camera to suit the operating environment it will be used in. "Installation Guide" ▼ Configuring the Camera from the Setting Page The setting page lets - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 25
Operating If an error message appears or the camera fails to operate correctly, see the error message and log message information in "Chapter 6 Appendix". "Chapter 6 Appendix" Preparing the Camera for Use 2 Initial Settings Important Before starting operations, make sure that the setting page and - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 26
Installing the Necessary Software Install the following software to perform initial settings for the camera. • Camera Management Tool: Software required for performing initial camera settings and maintenance • Admin Tools Certificate: An electronic certificate that is required for using Admin - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 27
The Camera Management Tool icon appears on the desktop. Installing the Necessary Software 2 Initial Settings 27 - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 28
using Camera Management Tool, please refer to "Camera Management Tool User Manual". • The settings made here will be reflected in the settings computer to the network and turn on the power. Please refer to "Installation Guide" > "Connecting the Camera". 2 Double-click the [Camera Management Tool] - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 29
set the default gateway address. (5) [IPv4 Default Gateway Address] Be sure to set this if you select [IPv4 Address Setting Method] > [Manual] and connect to the camera with a different subnet than that of the viewer. (6) [AutoIP] Select this to enable or disable AutoIP. (7) [IPv4 Address (AutoIP - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 30
to [High] by default. As a result, it may be necessary to register the camera's IP address as a trusted site to access the Admin Viewer/ VB Viewer, Setting Page or Admin Tools. 1 Select a camera from the camera list. 2 Click [Maintenance] menu > [Add to Trusted Sites]. A confirmation message appears - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 31
browser. • If the camera top page does not launch, please refer to "Troubleshooting" (p. 154) Top Page From the top page of the camera, you can . (4) [Admin Viewer] Launches the Admin Viewer (p. 32). (5) [VB Viewer] Launches the VB Viewer (p. 32). User Authentication When you use the Setting Page, - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 32
be used if an IPv6 address is specified. Only host names are supported for IPv6 connections. Note • Only administrators can connect to a register the camera's IP address as a trusted site. Viewing Video With VB Viewer VB Viewer allows any user with camera access to use the camera. The user, - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 33
Initial Settings Access the Top Page of the Camera to Check Video 2 33 - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 34
34 - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 35
3 Chapter Setting Page ❏ Administrator Password and Network Detailed Settings ❏ Camera Date and Time Settings ❏ Camera Name and Initial Camera Settings Related Settings ❏ Video Size and Quality Settings ❏ RTP Streaming Settings ❏ Upload and E-mail Notification Settings ❏ Video Server, Audio Server, - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 36
and log notifications (p. 77) • Camera Angle Digital zoom settings (p. 79) • User Page Link to web page customized by the user (For details, contact your nearest Canon Customer Service Center.) 36 - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 37
Important Notes on Use with Internet Explorer 8/9/10/11 If the pop-up is blocked and an information bar appears when attempting to access [View Logs] or [View Current Settings] on the maintenance page, enable Pop-up by following the procedure explained in the information bar. Setting Menu 3 - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 38
Note You can also access the Setting Page from the Camera Management Tool. For details, please refer to the "Camera Management Tool User Manual". Setting Menu (3) (1) (2) Items Common to All Setting Pages Applying New Settings When a setting is changed on any setting page, [Apply] shown on the - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 39
Returning to the Setting Menu Click [Settings menu] at the top right of each setting page to return to the Setting Menu. Important • Do not open multiple setting pages at one time and try to change the settings of a single camera. • Do not use the [Back] or [Forward] buttons in the web browser to - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 40
maximum packet size to a slightly lower value may increase sending efficiency. IPv4 (1) [IPv4 Address Setting Method] Select [Manual] or [Auto (DHCP)] in the address setting method. If [Manual] is selected, directly enter the values according to the environment in which the camera is used. If [Auto - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 41
Auto (DHCPv6)] Select [Enable] to use DHCPv6 to set an address automatically or [Disable] not to set an address automatically. (4) [IPv6 Address (Manual)] Enter a fixed IPv6 address. (1) [Name Server Address 1], [Name Server Address 2] Enter the name server address you want to register. To register - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 42
information can be referenced by the SNMP manager. If left blank, the following will be used by default: VB-S30D VB-S31D VB-S800D or VB-S805D VB-S900F or VB-S905F (5) [Installation Location] Set information regarding the installation location of this camera. Setting information can be referenced by - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 43
[Security Level], set the encryption password. Note • The information set in the camera is read-only from the SNMP manager. • Use the SNMP Manager that supports SNMP MIB2 (supporting RFC1213). 43 - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 44
with NTP server], [Synchronize with NTP broadcast], [Synchronize with computer time]. (2) [Date], [Time] When [Setting Method] is set to [Set manually], you can set the date and time manually. The date is entered in year/month/day format, and the time in hour:minute:second 24-hour format. (3) [Auto - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 45
is selected, after clicking [Apply], [Setting Method] will change to [Set manually]. • If [Synchronize with NTP server] is selected and the IP address if the time difference is large. • The camera's NTP broadcast mode does not support IPv6. • If the [Time Zone] setting is changed, the date and time - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 46
[Camera] Setting Initial Camera Settings and External Device Name The following can be set here. • Camera Name Enter the name of the camera. The camera name is required for use with RM-Lite. • Initial Camera Settings Sets shooting settings at camera start up. • Camera Control Set the digital zoom, - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 47
decreased and resolution [Disable] is increased, but the video file size becomes larger. The smart shade control function is not used. [Manual] Set the smart shade control strength. Select a strength from [1 (Mild)] to [7 (Strong)] in [Smart Shade Control Level]. (8) [Sharpness] Select a level - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 48
AE)] and selecting a shutter speed lower than 1/100 to see if the problem improves. • Even if [AE Mode] is set to [Auto (Flickerless)] or insertion/removal mechanism for the filter. • The Day/Night Mode can be switched manually via the Day/ Night function of the Admin Viewer (p. 144), or via the - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 49
seconds when booting even if the [LED Setting] is set to [Turn Off]. Important • [AGC Limit] is disabled when [Exposure] is set to [Manual], [Auto (Flickerless)], or [Auto (Flickerless 2)] in the Admin Viewer. • Minimum subject illumination may change when [AGC Limit] is set. Note • [Pan/Tilt Speed - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 50
], or [1280 x 960 / 640 x 480 / 320 x 240]. Select from [1280 x 720 / 640 x 360 / 320 x 180] or [1280 x 960 / 640 x 480 / 320 x 240] for the VB-S805D and VB-S905F. All options in the [Video] menu and the size set that can be selected in [Video Size] are determined by the set selected here - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 51
streams. H.264(2) video can be displayed using Admin Viewer and RM-Lite Viewer. It cannot be used for upload, memory card recording, or by VB Viewer. Refer to the settings for "H.264(1)" for details about [Video Size], [Bit Rate Control], [Target Bit Rate (1) [Date display] Select whether to enable - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 52
(4) [Time display] Select whether to enable time display over video. If [Enable] is selected, display time information will be displayed over video. (5) [Position of time display] Select [Upper left], [Upper right], [Lower left] or [Lower right] for the position of time display information. (6) [ - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 53
[RTP] RTP Server, Audio Multicast and RTP Streaming 3 Setting Page The following can be set here. • RTP Server Enable RTP, and set the RTSP authentication method and port number. • Audio Multicast Make settings for multicast audio transmission. • RTP Streaming 1 to 5 Make settings for RTP - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 54
distribution is confined to the local segment only and cannot be distributed by the router. (6) [Audio Transmission] Set RTP streaming audio transmission to [Disable] or [Enable]. Note • RTP stream URL rtsp://IP_address:port_number/rtpstream/config1(~5)=r|u|m [=r|u|m] is optional and can be omitted. - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 55
notification by text and video and video upload by HTTP/FTP, set [Video Size: Upload / Memory card] (p. 50) to a small size. • HTTP upload does not support SSL/TLS. • If the camera is set to perform upload or e-mail notification continuously, not all video or e-mails may be sent depending on the - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 56
the HTTP upload function and settings, contact your nearest Canon Customer Service Center. FTP Upload (1) [Notification] Select [Notification Only the user name and password required for authentication. Digest authentication is not supported. (4) [Proxy Server] Enter the host name or IP address of - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 57
[Upload] Setting HTTP/FTP Upload and E-mail Notification [User Setting] Video is uploaded according to the file naming method specified in [Subdirectory Name to Create] and [File Name to Create]. [Subdirectory Name to Create], [File Name to Create] If file naming is set to [User Setting], enter the - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 58
. Enter an integer from 0 to 65535. If 0 is set, the connection time becomes unlimited. (4) [Camera Control Time (sec.)] Enter the maximum time VB Viewer can retain camera control privileges. The maximum number is 3600. Enter an integer from 1 to 3600. Audio Server (1) [Audio Transmission from the - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 59
[Server] Setting the Video Server, Audio Server, HTTP Server, FTP Server and WS-Security • The audio may be temporarily interrupted, depending on the performance of the computer and the network environment. • The audio may be interrupted if anti-virus software is enabled. 3 • Communication may - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 60
[Event] Setting Video Record, Volume Detection, External Device Output/Input and Timer The following can be set here. • Video Record Setting Set where video is recorded when an event occurs. • Volume Detection Set the operation to be performed at the time of volume detection. • External Device - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 61
of volume detection, see "Safety Precautions" in "Precautions for Use of Built-In Camera Functions and Included Software" (p. 7). • When Admin Viewer/VB Viewer has camera control privileges, those camera control privileges are released if the camera is moved to a preset position, specified in the - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 62
an external device input event is triggered (p. 144). • Camera control privileges are released if any of the following actions occur while the Admin Viewer/VB Viewer has camera control privileges. - If the camera angle is moved according to the [Preset] settings - If the Day/Night Mode is - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 63
1]. • [External Device Output] and [Day/Night Mode Switching] do not support [Repeat Interval]. • When [Day/Night] in the Admin Viewer is set to Night Mode Switching] settings switch Day/Night Mode while the Admin Viewer/VB Viewer is assigned camera control, control will be released. Note When - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 64
[Access Control] Setting User Access Privileges The following can be set here. • Administrator Password Set the administrator password. • Authorized User Account Register who can access this camera. • User Authority Set the authorities for authorized users and guest users. • IPv4 Host Access - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 65
Note If the same address is duplicated, the policy for the address that appears highest on the list will be applied. IPv6 Host Access Restrictions [Access Control] Setting User Access Privileges 3 Setting Page (1) [Apply Host Access Restrictions] Set IPv6 host access restrictions to [Disable] or - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 66
the IPsec setting method. • Auto Key Exchange Settings Set auto key exchange. • IPsec Set IP security can be specified through auto key exchange or manual setting with up to five communicating devices. IPsec (6) [DH Group] Select the key generation information for the DH algorithm that will be used - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 67
approximately 5 to 10 seconds before communication with the camera starts. IPsec Set (Manual) IPsec Sets 1 to 5 are available, and you can specify IPsec settings [AES], [3DES], [DES] or [NULL] according to the encryption algorithm supported by the device to connect to. Normally [AES] or [3DES] is - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 68
to [HMAC_SHA1_96] or [HMAC_MD5_96] according to the authentication algorithm supported by the device to connect to. (17)[SA AH Authentication > [IPv4 Address Setting Method] > [Manual]. For IPv6 addresses, use addresses set with [Network] > [IPv6 Address (Manual)]. • If any setting is changed from - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 69
[Create Self-Signed Certificate] After entering each of the following settings, click [Exec] to create a self-signed certificate. Follow the instructions in the message and reboot. The certificate created will take effect after rebooting. Note Creating a certificate takes time, so it is recommended - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 70
(6) [Display Server Certificate Details] Click [Exec] to view the details of the server certificate. (7) [Display Self CA Certificate] Used for the purpose of testing SSL communications, but otherwise not normally used. (8) [Backup] Click [Exec] to perform a backup of the certificates and private - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 71
[802.1X] Network Port Authentication Settings The following can be set here. Certificate Information 3 Setting Page • 802.1X Authentication Display the 802.1X authentication enable/disable control and status. • Authentication Method Set the authentication method used for 802.1X authentication. - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 72
(5) [Delete Certificate] Deletes all installed CA certificates, client certificates, and client private keys. Only "CA Certificate" is displayed when [Authentication Method] is set to [EAP-TTLS] or [EAPPEAP], but any installed client certificates and client private keys are also deleted. Important • - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 73
of booting. For inserting and removing the memory card, see "Installation Guide" > "Using a Memory Card". (2) [Operation Settings] Set write is recorded due to an intelligent function event occurrence (p. 103) - When manually recorded to memory card from the Admin Viewer (p. 147) • New files - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 74
unmount process when turning off the power to the camera or removing the memory card. Failing to unmount first may result in management file problems or the memory card becoming inaccessible. You can use the Camera Management Tool (p. 28) to mount/ unmount memory cards from multiple cameras at the - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 75
Important Information recorded to the memory card may be regarded as "personal information". Take sufficient precautions for handling this information when releasing to third parties for disposal, transfer or repair. Note For accessing files saved to the memory card, see "Memory Card Access" (p. 150 - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 76
URI, contact your System Administrator. * [LAN Interface], [Maximum Packet Size], [IPv4 Address Setting Method], [IPv4 Address], [Subnet Mask], [IPv6], [Auto (RA)], [Auto (DHCPv6)], [IPv6 Address (Manual)], [Prefix Length], [HTTP Port] and [HTTPS Port]. 76 - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 77
[Maintenance] Viewing Current Settings, Event Logs and Performing Maintenance 3 Setting Page The following items can be used here. • Device Information Display information about the current device. • Tool Display or Initialize Camera Settings, and Back Up/Restore Settings. • Log Notifications - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 78
For details on log messages, see "List of Log Messages" (p. 156). (2) [Notification Level] Select [Error], [Errors and warnings], or [All] for the log message notification level. For details on log messages, see "Log Messages on the Camera" (p. 156). (3) [Copy E-mail Settings] Copy the mail settings - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 79
Setting menu. It cannot be operated from Admin Viewer or VB Viewer. • Connecting to the camera from the [Camera Intelligent function settings • [Camera Angle] supports connection to a single camera for up to ). • After [Exposure] is set to [Manual] and adjusted in Admin Viewer (p. 143), [Exposure] is - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 80
80 - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 81
4 Chapter Admin Tools ❏ Privacy Mask Setting ❏ Panorama Image Registration ❏ View Restriction Setting ❏ Camera Preset Setting ❏ Intelligent Function Setting ❏ Viewing Logs ❏ Managing Memory Card Video - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 82
areas can be masked, allowing thorough protection of privacy. View Restriction Setting Tool (p. 92) The View Restriction Tool restricts the viewable capture range in the VB Viewer. You can set the desired range with the mouse by referring to the preview in panorama mode. 82 - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 83
Preset Setting Tool (p. 96) A tool that lets you set presets and the home position visually. You can make the desired settings with the mouse by referring to the preview in panorama or full video mode. Admin Tools Overview Log Viewer (p. 115) This viewer shows the logs of operating conditions of - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 84
of the Admin Tools can also be launched from the Camera Management Tool. For details, please refer to the "Camera Management Tool User Manual". (4) (1) [Admin Viewer] Click to launch Admin Viewer. (2) [Setting Page] Click to launch Setting Menu. (3) [Back to top] Click this button to navigate to - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 85
Privacy Mask Setting Tool A tool that lets you cover certain areas on the camera video with privacy masks. When the camera is panned, tilted, or zoomed, the privacy mask area responds to the camera video. 4 You can set privacy masks for up to eight areas while checking the video on the camera. - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 86
such as in the Admin Viewer, the control privileges will be obtained the moment the Privacy Mask Setting Tool is launched. (6) [Control for Admin] button Displays the Control for Admin Panel (p. 123). (7) Registered Privacy Mask Display Area (Capture area) You can check the settings for the area - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 87
Privacy Mask Setting Tool (1) (2) (3) (4) (1) (3) Important • The privacy mask areas are also part of the intelligent function detection area. Subject movement may be seen. • Privacy masks are applied to all video transmitted from the camera (live video, uploaded video, recorded video, video - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 88
Changing/Deleting a Privacy Mask Area How to Change 1 Select the privacy mask area you want to change. Click the privacy mask area you want to change in the registered privacy mask display area (capture area) or select a privacy mask area by clicking [Next]. 3 Click [Quick change] or [Save settings - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 89
Panorama Creation Tool A panorama image capture/creation tool that shows the entire area that can be captured by this camera. When performing pan, tilt, or zoom operations, setting presets using the viewer, etc., you can see at a glance which part of the entire area the set area is occupying. 4 - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 90
Image 1 Click [Start Panorama Creation]. The capture is started. Change the settings beforehand for [Exposure Lock], [White Balance Lock], and [Focus Lock] (VB-S30D only) as necessary. To stop the capture when underway, click [Cancel]. When you position the mouse pointer over the panorama image - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 91
Panorama Creation Tool - Users not connected via RTP Saving a Panorama Image as Image Files/ • When a small value is entered for [Maximum Frame Rate: Video Transmission] under [Video] > [JPEG] in the Setting page, panorama capture is slowed down. Opening from Image Files You can save a recorded - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 92
set by the View Restriction Setting Tool are applied in the following cases. • When the Admin Viewer is accessed with authorized user authorities • When the VB Viewer is accessed • When accessed via the Intelligent Function Setting Tool • When accessed via RM-Lite 92 - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 93
Display Screens of View Restriction Setting Tool (1) (2) (3) View Restriction Setting Tool (6) (6)-1 (6)-2 (6)-3 4 (7) (8) (9) Admin Tools (10) (5) (4) (11) (12) (1) Video Display Area The video currently captured by the camera is shown. Pan, tilt, and zoom operations are the same as - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 94
different from the actual image. After view restrictions have been set, be sure to confirm with the VB Viewer that the view restrictions have been reflected correctly. • Confirm the settings using the VB Viewer. (View restrictions are not applied to the video display area of this tool, nor to the - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 95
Maximum vertical capture area Tilt controllable area Maximum wide-angle viewing angle Pan controllable area Maximum horizontal captured area • The pan and tilt ranges vary depending on the zoom ratio (view angle). Setting view restrictions automatically restricts the camera operating angle. - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 96
Preset Setting Tool A tool that lets you set presets and the home position. You can set up to 64 presets (VB-S30D/VB-S31D) and the home position while viewing the preview in the panorama or full video mode. Preset Setting Tool Reflecting in the viewer Important • If - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 97
Preset Setting Tool Display Screens of Preset Setting Tool (1) (2) (3) (6) (7) (8) (9) (10) (10)-1 (10)-2 (11) (17) (18) (12) 4 (13) (14) (15) (16) Admin Tools (5) (4) (19) (20) (1) Video Display Area The video currently captured by the camera is shown. Pan, tilt, and zoom operations are - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 98
light source of the condition in which it is used. For details on light sources, see p. 47. • [R Gain], [B Gain] If white balance is set to [Manual], set the respective gains to a value between 0 and 1023. (11)[Get camera info] Load the current camera angle and other settings of the image display - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 99
Preset Setting Tool 4 Admin Tools 2 Click [Detailed Settings] and select the [Show in viewers] checkbox. 2 Select the [Show in viewers] checkbox. 3 Drag to move or resize the preset preview frame (yellow) shown on the panorama screen to set the preset. If you click on the panorama screen, the - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 100
Fine-tune the camera angle and adjust the video quality with focus (VB-S30D only) or smart shade control while checking the video. 4 Click on the Setting page have been changed. • If [Manual] is selected in [Focus Mode], manually adjust the focus while checking the actual video in the video - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 101
tour from the following options. [Not used] Preset tour is not performed. [For Viewers] Preset tour is performed when a camera is connected via the VB Viewer, etc. [Always] Preset tour is always performed. (2) [Set Preset Tour Time] checkbox This setting is enabled when [For Viewers] or [Always] is - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 102
5 Click [Save settings]. When you complete setting the tour schedule list, click [Save settings]. The settings are saved in the camera. Note The home position cannot be added to the tour schedule list. 102 - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 103
Intelligent Function Setting Tool This tool is used to set intelligent functions that perform uploads, notify the viewer, etc., if a change has occurred in the captured video due to movement of a subject. 4 Camera Tampering Detection Moving Object Detection Volume Detection Camera E-mail - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 104
Abandoned Object Detection Detect objects that are carried in and abandoned for a certain amount of time. This function can be used to detect objects that have been left. Abandoned object detection is triggered when an object is left in the detection area for a specified duration. Object abandoned. - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 105
where high reliability is required. If constant and maximum reliability is required for surveillance it is not recommended that you use this function. Canon shall assume no liability for any accident, loss or other undesirable outcomes resulting from intelligent function operations. 105 - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 106
Display Screen of Intelligent Function Setting Tool (1) (2) (3) (11) (12) (13) (14) (15) (16) (17) (7) (18) (8) (9) (10) (6) (5) (4) (19) (20) (1) Video Display Area The video currently captured by the camera is shown. Detection areas are shown in translucently colored frames ( - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 107
Intelligent Function Setting Tool If camera control privileges are not obtained, this function is grayed out. Important It takes tens of seconds for the intelligent function to restart. No detection is performed while restarting. (10)[Detection Settings] Show the [Detection Settings] dialog box (p. - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 108
Setting page is changed, be sure to change the preset position setting (VB-S30D/VBS31D only) and intelligent function settings, and check the operation. the camera position is locked, control privileges cannot be obtained by VB Viewer or RM Viewer. Also, the custom settings automatic control will - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 109
Setting Intelligent Function Detection Settings Setting Detection Criteria ([Detection Criteria] tab) Set detection criteria while operating the camera and checking the video in the video display area. [Detection Criteria] tab Moving object detection, abandoned object detection, camera tampering - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 110
Setting Event Operations ([Event] tab) Set operations to be performed upon detection of changes in a subject. [Event] tab (1) (2) (3) Setting Detection Areas Set detection areas in the video display area. Setting a [Rectangular] detection area A rectangle is shown in the video display area. - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 111
Intelligent Function Setting Tool Setting Detection Criteria per Detection Type Specify different detection criteria for each detection type. Configured detection Detect criteria for [Moving Object Detection] area Set detection areas where you want to detect moving objects. 4 Admin Tools 5 - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 112
[Object Size (%)] Enter a value or move the slider to set the ratio of the size of an object that was left behind in the detection area to the size of the detection area. When [Object Size (%)] is changed, an indicator frame representing the area of the object is displayed for 1 second in the center - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 113
Intelligent Function Setting Tool Any moving objects detected are shown with contour lines. If it is smaller than [Change Ratio (%)], contour lines are white. If the video is changed for an area larger than [Change Ratio (%)], contour lines take on the same color as the detection area, indicating - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 114
[Clear detection area/line] Clear the detection area/line of the detection setting selected. It cannot be cleared in camera tampering detection. [Copy detection criteria settings] Copy the detection criteria of the detection setting selected. [Paste detection criteria settings] Paste the copied - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 115
Log Viewer This tool lets you view the operating condition log of the camera. Display Screens of Log Viewer 4 Admin Tools (1) (2) (3) (4) (5) (7) (8) (9) (6) (10) (12) (11) (13) (14) (15) (16) (1) [Download] Download log files from this camera or memory cards. (2) [Reload] Reload the - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 116
(13)[Date & Time] Set the date and time of the log you want to show using the filter function. Select the [Specify start date & time] or [Specify end date & time] checkbox to set the date and time. (14)[Apply filter] Show the filtered logs in the log display area. (15)[Search for] Enter the - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 117
are cleared when you perform [Maintenance] > [Restore Default Settings] and [Reboot], or press the reset switch on the camera. Note [Application], [HTTP Server], and [System] support the List of Log Messages (p. 156). 117 - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 118
Recorded Video Utility This utility manages video recorded on a memory card. It allows you to play back recorded video and download it to a computer, display a video list or perform filtering. Display Screens of Recorded Video Utility (1) (2) (4) (5) (3) (7) (6) (13) (8) (9) (10) (11) (12) - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 119
Displays the format of a recorded video ([JPEG] or [H.264]). [Recording Type] Displays the type of recorded video ([Upload], [Recording-Mode Stream], [Manual], [Timer], [Event]). [Upload] indicates videos that failed to upload from the camera, and [Recording-Mode Stream] indicates videos where video - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 120
Note When the download folder is changed, the download status of the files in the download folder prior to the change becomes [Not Downloaded]. Manually copy the files in the download folder prior to the change to the new download folder to change their status to [Downloaded]. Downloaded videos are - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 121
Note • [Real Time] can be selected only for playback of downloaded videos. • [Not Downloaded] or [Partially Downloaded] videos may not be played back in the order they were recorded. Slider/Playback Control Recorded Video Utility 4 Admin Tools Drag the slider to change playback position. The - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 122
[Save Playback Frame As] Video frames that are being displayed can be saved as a separate file. Clear the [Enable H.264 playback] checkbox to play H.264 video in an external player. Displaying Memory Card Information Click [Memory Card Details] to display information on the memory card inserted in - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 123
Control for Admin This panel is used to adjust video from the camera that is Operating the Control Items displayed by each Admin Tool. The panel is available to the Privacy Mask Setting Tool, View Restriction Setting Tool, Preset Setting Tool and Intelligent Function Setting The panel operates - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 124
124 - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 125
5 Chapter Admin Viewer/VB Viewer ❏ Differences between the Admin Viewer and the VB Viewer ❏ User Authorities and Camera Control Privileges ❏ Viewer Startup and Operation ❏ Camera Control and Obtaining Camera Control Privileges ❏ Admin Viewer Operation and Settings - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 126
camera control to use the Admin Viewer. Users must have the video distribution authority to display video using the VB Viewer. To operate the camera using the VB Viewer, users must also have camera control authority. Audio distribution authority is required to receive audio using the Admin - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 127
given all authorities. The user name is fixed to "root". The Administrator can launch the Admin Viewer from the [Admin Viewer] link and the VB Viewer from the [VB Viewer] link on the top page. [Authorized User] Authorized users can launch the Admin Viewer from the [Admin Viewer] link on the top - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 128
the Admin Viewer from the Camera Management Tool. For details, please refer to the "Camera Management Tool User Manual". 1 Start the top page of the camera (p. 31). 2 Click [Admin Viewer] or [VB Viewer] according to the user. 3 For [Admin Viewer], enter the user name and password. The viewer is - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 129
only open panels that are necessary, and can put them anywhere desired in the web browser. 5 (2) (3) (9) (7) (4) (5) (6) (10)(11) (30) (31) (32) Admin Viewer/VB Viewer (1) (8) (12) (23) (13) (15) (17) (19) (21) (24) (14) (16) (18) (20) (25) (33) (18) (19) (22) (21) (34) (28) (26 - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 130
displayed upon clicking the [Viewer PTZ] button. (34)Viewer PTZ Area Designator Set the cropped area in the video display area. VB Viewer (2) (3) (11) (9) (4)(5)(6) (8) (1) (15) (17) (16) (12) (7) (10) (13) (14) (18) (16) (19) (20) (21) (22) (23) (24) (1) Video Display Area Displays - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 131
the camera (24)Digital PTZ Area Designator Specify the area in the video display area to crop with 5 control privileges. Digital PTZ. Admin Viewer/VB Viewer (9) Slider for tilt This slider is used to control the tilt (vertical movement) of the camera. Obtaining Camera Control Privileges (10 - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 132
operations can be carried out in both the Admin Viewer and the VB Viewer. Important The estimated pan and tilt operational durability is 50,000 camera only within the view restrictions. • Users operating the camera in the VB Viewer can control the camera within the view restrictions. Changing the - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 133
enter mode. 2 In the video display area, drag in the direction you would like to change the camera angle. An arrow will appear. Admin Viewer/VB Viewer 2 Drag out a rectangle in the video display area. Drag left-to-right to define an area to zoom in on. Drag right-to-left - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 134
• The [BLC] button is not available if [Smart Shade Control] is set to [Auto]. • The [BLC] button is not available if [Exposure] is set to [Manual]. Magnifying Part of the Video (Viewer PTZ) You can use the Viewer PTZ panel to magnify part of the camera's video in the video display - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 135
Viewer PTZ function is used, you cannot operate the camera by clicking/dragging the video display area. Admin Viewer/VB Viewer Note • Video cropped with Viewer PTZ will not be videos recorded manually, or by event or timer. • The cropped position in the video display area will be reflected in full - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 136
Exiting Viewer PTZ Click the [Viewer PTZ] button again. The Viewer PTZ panel closes and Viewer PTZ is exited. Cropping and Displaying Part of Video (Digital PTZ) You can use the Digital PTZ panel to crop and display part of a camera video in the video display area. It is also possible to use a - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 137
panel closes the Digital PTZ panel, Digital PTZ will stay on. However, when you reconnect to Viewer, the initial status will be restored. Admin Viewer/VB Viewer The preview frame size can be set to any of five sizes (the changed size is displayed under [Video Size] on the digital PTZ - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 138
480 x 360 640 x 480 1280 x 960 Fit to Window * [Video Size Set] cannot be set to [1920 x 1080 / 960 x 540 / 480 x 270] for the VB-S805D and VB-S905F (p. 50). [Actual Pixels] displays the video at the size at which it is being captured. [Fit to Window] displays the video at the maximum - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 139
appears and use the slider to set an appropriate volume. 5 Admin Viewer/VB Viewer A snapshot panel will open showing a still image from the moment time the Receive Audio panel is launched from the VB Viewer, a message to install the "Canon Network Camera Audio Receiver" add-on will be displayed - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 140
Checking Information The following icons will appear depending on the content of the information displayed. Icon (color) Meaning Description (Blue) Information Appears when a camera operation has been successful. The following information appears. • Help messages, such for each button and - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 141
control buttons to set the pan, tilt and Panel and perform camera operation and video settings. zoom operations as well as the speed. Admin Viewer/VB Viewer Opening/Closing and Moving Control Items Clicking the title of a control item will open or close it. ⇔ You can open the various control - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 142
the 7 levels from [1] (Mild) to [7] (Strong). Important If you set [Smart Shade Control] to [Auto] or [Manual], [Haze Compensation] is set to [Disable]. Note • When [Auto] or [Manual] is selected for [Haze Compensation], the video data size increases. • When using [Haze Compensation], contrast may - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 143
negative value. To brighten the video, select a positive value. Admin Viewer/VB Viewer (3) [Metering Mode] When [Auto], [Auto (Flickerless)], [Auto (Flickerless time according to the capture conditions. (6) [Gain] If [Manual] is selected for [Exposure], set a desired gain value. Moving - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 144
.) using the light source, making sure the subject fills the entire screen, and then execute [One-shot WB]. [R Gain], [B Gain] When setting the white balance manually, set the values of red and blue gain in the range 0 to 1023 to match the light source. 144 Setting the Day/Night Mode - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 145
the custom setting number selected in [Register to]. Admin Viewer/VB Viewer Registering Custom Settings By registering settings for camera exposure, white balance, etc. beforehand, you can load settings using manual or automatic control. In custom settings, the setting values for the following - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 146
(4) [Register] Register the auto control settings. Important If the same time is specified multiple times for [Timer 1] to [Timer 4], [Register] will be disabled and the settings will not be possible. Adjusting Image Quality (1) (2) [Enable H.264 reception] checkbox Select to receive H.264 video. - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 147
] button appearance changes as shown below depending on recording status. Not recording Recording Admin Viewer/VB Viewer Recording to a Memory Card Manually Video displayed in the Admin Viewer can be manually recorded to a memory card. Note • To record on a memory card, a memory card must be - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 148
148 - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 149
6 Chapter Appendix ❏ Memory Card Access ❏ Modifiers ❏ Troubleshooting ❏ List of Log Messages ❏ List of Viewer Messages ❏ Restore Default Settings ❏ List of Factory Default Settings ❏ Specifications ❏ Index - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 150
] under [Memory Card] in the setting page (p. 74). • Canon will assume no liability for any accident or damage resulting from use of and the date and time. The following shows the folder structure. Example: H.264 video, manually recorded using a camera with an IP address of 192.168.100.1, on Sept. 10 - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 151
Name Format for Data Downloaded with Recorded Video Utility Example: Video, manually recorded on Sept. 10, 2015, starting from 16:06:19 (Camera Time Recording start time (UTC) Appendix (4) Recording type E: Event M: Manual recording R: Recording-mode stream T: Timer U: Upload Note • The file - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 152
Pan position -174.99 - 175.00 0 %T Tilt position -90.00 - 0.00 0 %Z Zoom position 0.01 - 300.00 0 %V Camera server VB-S30D/VB-S31D/VB-S800D/VB-S900F/VB-S805D/VB-S905F %y Year of capture time 2001 - 2031 %m Month of capture time 01 - 12 %d Day of capture time 01 - 31 %w Day of - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 153
Available Modifiers The modifiers that can be used for each setting item are specified below. [HTTP Upload] (p. 56) [Parameter (query string)] All modifiers can be used. [FTP Upload] (p. 56) [Subdirectory Name to Create] Only the modifiers %y,%m,%d,%w,%H,%h,%n can be used. [File Name to Create] - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 154
troubleshooting for Camera Management Tool, please refer to the "Camera Management Tool User Manual". Problem set within the ranges supported by the applicable network security settings. (See (3) below for instructions on how to set this.) • In VB Viewer, audio cannot be used if the Canon Network - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 155
Troubleshooting Problem Countermeasures The camera cannot be controlled. • If you connect [Operation Settings] is set to [Save Log], change it to [Save Logs and Videos]. • To manually save recordings to a memory card, obtain camera control privileges. Files cannot be saved in the Settings page - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 156
List of Log Messages Log Messages on the Camera Log messages are classified into the following types. Category Level crit Error Code 4xx err Error 3xx warning Warning 2xx notice Warning 1xx info Information 0xx Fault level Software-level failure (Task operations will stop) - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 157
List of Log Messages Application (Uploader) Messages A004 Starting and stopping of uploader [info] Description %1 uploader (A004) %1 Starting or stopping Meaning The uploader was started or stopped. A040 Number of uploads (MAIL) [notice] Description uploader mail: normal=%1 test=%2 ( - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 158
time settings used when connecting. 43: Reconnect or restart. 45: Use supported client software. 47: Check user level used when connecting. 49: Check server stops. Countermeasure If the problem persists after rebooting, the camera is faulty. Arrange for servicing. Application (Video-Related) - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 159
not be initialized. V300 Video input error [err] Description video %1 warning - %2 (V300) Countermeasure If the problem persists after rebooting, the camera is faulty. Arrange for servicing. 6 Appendix %1 %2 Meaning Video number Error number An error in the video input was detected that may - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 160
intelligent service was running. Countermeasure If the problem persists after rebooting, the camera is faulty. Arrange for servicing. upper limit. (M208) %1 Video type ([Upload], [Recording-Mode Stream], [Manual], [Timer], [Event]) Meaning The upper limit for the number of video files - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 161
XXX) get_password failed, IP:%1 (H143) Description Meaning starting extio (S012) The external device input/output service was started. %1 IP address S013 External device service shut down [info] Meaning An unknown user was specified in user authentication. Description Meaning shutdown extio - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 162
of error Meaning An error occurred in the initialization of the timer service. Countermeasure If the problem persists after rebooting, the camera is faulty. Arrange for servicing. S413 Timer service runtime error [crit] Description timer working error [%1] (S413) %1 Error number Meaning An - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 163
List of Log Messages R003 RTSP PLAY request received [info] R006 Stopping multicast [info] Description PLAY received: client_IP=%1, profile=%2, num_of_sessions=%3 (V=%4, A=%5, M=%6, BC=%7) (R003) Description stop multicast: profile=%1, num_of_sessions=%2 (V=%3, A=%4, M=%5, BC=%6) (R006) %1 - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 164
RECVQ_META SENDQ_MEDIA Meaning A communication error occurred between modules. Countermeasure If the problem persists after repeated attempts and rebooting, the camera may be faulty. Arrange for servicing. R302 Parameter acquisition failure [err] Description cannot get parameter: %1 (R302 - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 165
List of Viewer Messages Messages Displayed in the Information Field Messages displayed in the information field of the viewer are classified into the following three types. Icon Category Explanation Information Message Help messages on various buttons, pull-down lists, etc., as well as frame - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 166
the camera due to address restriction or outside service hours. Viewer is unavailable. You did camera a supported model. using admin tool with proxy authentication support. User disabled in the computer. Failed to initialize Canon Network Camera Audio Receiver. ActiveX plugin is - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 167
details on using Camera Management Tool, please refer to "Camera Management Tool User Manual". • For factory default settings, please refer to p. 169. 6 Restoring the the back of the camera. 1 For VB-S30D/VB-S31D/VB-S800D/VB-S805D, remove the top cover. For top cover removal, see the "Installation - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 168
Turn the camera on and off by plugging in or unplugging the LAN cable (PoE power supply). 3 Turn on the power while pushing the reset switch, and Reset Switch 4 For VB-S30D/VB-S31D/VB-S800D/VB-S805D, attach the top cover. For top cover attachment, see the "Installation Guide" included with the - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 169
Information Setting root camera Auto 1500 Manual 192.168.100.1 255.255.255.0 Enable Enable Enable Enable 64 Disable Disable Enable Disable Disable Item Setting Administration Function Name VB-S30D VB-S31D VB-S800D or VB-S805D VB-S900F or VB-S905F Installation Location 6 • SNMP v1 and v2c - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 170
270 Bit Rate Control Use bit rate control Video Quality 3 Target Bit Rate (kbps) 2048 Frame Rate (fps) 30 I Frame Interval (sec) 1 VB-S805D/VB-S905F • All Videos Video Size Set 1280 x 720 / 640 x 360 / 320 x 180 • JPEG Video Quality: 320 x 180 3 Video Quality: 640 x 360 3 Video - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 171
Server Proxy Port 80 Proxy User Name Parameter (query string) • FTP Upload Notification Video data upload with FTP FTP Server * [320 x 180 JPEG] for the VB-S805D/VB-S905F. 171 - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 172
Item Setting User Name PASV Mode Enable File Upload Path File Naming YYMMDDHHMMSSms Subdirectory Name to Create File Name to Create image.jpg File Name to Create video.mov Maximum Number of Loops 0 • E-mail Notification Notification Text Only Mail Server Name Mail Server Port 25 - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 173
Item Setting • Timer 2 Timer Event Disable Start Time 00:00 End Time 00:00 Repeat Interval None Video Record Disable E-mail Notification Disable External Device Output Disable • Timer 3 Timer Event Disable Start Time 00:00 End Time 00:00 Repeat Interval None Video Record - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 174
Item Setting 20: / 128 Yes • IPsec IPsec Auto Key Exchange • Auto Key Exchange Settings IPsec SA Encryption Algorithm AES->3DES IPsec SA Authentication Algorithm HMAC_SHA1_96 IPsec SA Validity Period (min) 480 ISAKMP SA Encryption Algorithm AES->3DES ISAKMP SA Authentication Algorithm - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 175
Item Setting Security Gateway IPv4 Address Security Gateway IPv6 Address Destination Subnet Mask Length 16 Destination Prefix Length 16 IKE Pre-Shared Key SA ESP Encryption Algorithm AES SA ESP Authentication Algorithm HMAC_SHA1_96 SA ESP Encryption Key (outbound) SA ESP Authentication - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 176
Item SA AH SPI (inbound) • Certificates Certificate Status Country (C) State/Province (ST) Locality (L) Organization (O) Organizational Unit (OU) Common Name (CN) Validity Period Start Date Validity Period End Date • Encrypted Communications HTTPS Connection Policy • 802.1X Authentication 802.1X - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 177
(primary color filter) VB-S30D/VB-S31D/VB-S800D/VB-S900F: approx. 2.1 million pixels VB-S805D/VB-S905F: approx. 1.3 million lux (F1.6, shutter speed 1/2 sec., smart shade control on [7], 50IRE) Auto/One-shot AF/Manual/Fixed at infinity 0.3 m (12 in.) to infinity 0.5 m (1.6 ft.) to infinity 1, 1/2, - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 178
264: 1920 x 1080, 960 x 540, 480 x 270 (VB-S30D/VB-S31D/VB-S800D/VB-S900F) 1280 x 720, 640 x 360, 320 x 180 , IPv6) SSL/TLS, IPsec (Auto Key Exchange/Manual) EAP-MD5, EAP-TLS, EAP-TTLS, EAP- ICMP, POP3, NTP, SMTP authentication, RTSP, WV-HTTP (Canon proprietary), ONVIF IPv6: TCP/IP, UDP, HTTP, FTP, - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 179
Specifications Server Audio Compression G.711 µ-law (64 kbps) Method Audio Communication Method Sound Transfer Protocol by Canon Privacy Mask Number of registration: Max. 8 places, Number of mask colors: 1 (select from 9 colors) View Restrictions Available Presets Max. 64 positions - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 180
Miscellaneous Operating Environment Temperature: -10 °C to +50 °C (+14 °F to +122 °F) Humidity: 5% to 85% (without condensation) Power Supply PoE: PoE power supply via LAN cable (IEEE802.3af compliant) Power Consumption Class 0 power sourcing equipment (requests 15.4 W) Max. 7.8 W Max. 7.6 W - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 181
Index Numerics 802.1X Authentication 71 Camera Tampering Detection 112 Certificate Information 71 Certificate Management 69, 71 Client 58, 71 A Color Saturation 47, 146 Abandoned Object Detection 111 Control for Admin 123, 141 Access Control 64 Admin Tools 82 Custom Installation - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 182
146 Information Field 140 Information Message 165 Initial Camera Settings 46 Initial Settings 167 Input Volume 58 Installation Conditions 49 Installation Guide 5 Installing the Necessary Software 26 182 Intelligent Function Setting Tool 103 IP Address 40 IPsec 66 IPsec Set 66, 67 IPv4 - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 183
Passing Detection 113 Password 28, 31 Playback Videos 120 PoE Supply 168 Post-event Buffer 55, 73 Pre-event Video Utility 118, 147 Recording Manually 147 Reference Volume Level 60 , 141 Time 44 Time Zone 44 Timer 62, 145 Troubleshooting 154 Trusted Site 19, 30 TTL 53 U Unmount 73 - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 184
V VB Viewer 125, 130 Video Distribution 64, 126 Video Format 55, 73, 50, 137 Video Size Set 50 View Restriction Setting Tool 92 Viewer Admin Viewer 141 RM-Lite Viewer 17 VB Viewer 130 Viewer PTZ 134 Voice Activity Detection 58 Volume Detection 60, 147 W Warning Message 165 White Balance - Canon VB-S805D | Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 185
BIE-7020-002 © CANON INC. 2015
ENGLISH
Network Camera
Network Camera
Operation Guide
Be sure to read this User Manual before using the network camera.