Canon VIXIA HF R11 VIXIA HF R10/HF R11/HF R100 Instruction Manual - Page 139
Notification Sounds], Power Saving Mode], Quick Start], Control for HDMI]
View all Canon VIXIA HF R11 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 139 highlights
Menu item / [Initialize / ] Setting options / [Built-in Mem.], [Mem. Card] z z2 z 38 [Initialize ] [Quick Initialization], [Complete Initialization] [Photo Numbering] [ Reset], [ Continuous] z z z - [Firmware] - - -z- [Reset All] [No], [Yes] zzz - [Eye-Fi Communication] [ Automatic], [ Off] z z z 128 1 Option not available when the camcorder is connected to an HDTV using an HDMI cable. 2 Option available only from the original movies index screen. [Notification Sounds]: A beep will accompany some operations like turning on the camcorder, the self-timer countdown, etc. [Power Saving Mode]: In order to save power when the camcorder is powered by a battery pack, it will automatically shut off if left without any operation for 5 minutes. • Approximately 30 seconds before the camcorder shuts off, [Auto Power Off] will appear. • In standby mode, the camcorder will shut off after the time selected for the [Quick Start] setting. [Quick Start]: Select whether to activate the Quick Start function ( 43) when you close the LCD panel in a recording mode and the length of time after which the camcorder will end the standby mode and shut off automatically. [Control for HDMI]: Activates the HDMI-CEC (Consumer Electronics Control) function. When you connect the camcorder to an HDTV compatible with HDMI-CEC using an HDMI cable, you can control the camcorder's playback using the remote control of the TV. • If set to [ On], when the camcorder is connected to a compatible HDTV using an HDMI cable, the video input on the TV will automatically be set to the camcorder's video input. Then, you can use the up/down/ left/right buttons and the OK or SET button on the TV's remote control to play back your recordings. Additional Information 139