Canon VIXIA HF R11 VIXIA HF R10/HF R11/HF R100 Instruction Manual - Page 148
Recording, Playback
View all Canon VIXIA HF R11 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 148 highlights
Recording Pressing START/STOP will not start recording. - You cannot record while the camcorder is writing previous recordings onto the memory (while the ACCESS indicator is on or flashing). Wait until the camcorder has finished. - The memory is full or it already contains the maximum number of scenes (3,999 scenes). Delete some recordings ( 53, 90) or initialize the memory ( 38) to free some space. The point where START/STOP was pressed does not match the beginning/end of the recording. - There is a slight interval between pressing START/STOP and the actual start/end of recording. This is not a malfunction. The camcorder will not focus. - Autofocus does not work on the subject. Focus manually ( 61). - The lens or Instant AF sensor is dirty. Clean the lens or sensor with a soft lens-cleaning cloth ( 167). Never use tissue paper to clean the lens. When a subject flits across in front of the lens, the image appears slightly bent. - This is a phenomenon typical of CMOS image sensors. When a subject crosses very quickly in front of the camcorder, the image may seem slightly warped. This is not a malfunction. Changing between recording ( )/record pause ( )/playback ( ) takes longer than usual. - When the memory contains a large number of scenes, some operations may take longer than usual. Save your recordings ( 111) and initialize the memory ( 38). Movies or photos cannot be recorded properly. - This may occur as movies and photos are recorded/deleted over time. Save your recordings ( 111) and initialize the memory ( 38). After using the camcorder for a long time, it becomes hot. - The camcorder may become hot after using it continuously for long periods of time; this is not a malfunction. If the camcorder becomes unusually hot or it becomes hot after using it only for a short while, it may indicate a problem with the camcorder. Consult a Canon Service Center. Playback Cannot add scenes to the playlist. - The playlist can contain a maximum of 999 scenes. If the playlist includes scenes recorded in FXP mode, the maximum number of scenes in the playlist may be less than 999. - You may not be able to add scenes to the playlist if they were recorded or edited using another device. - The memory is full. Delete some recordings ( 53, 90) or initialize the memory ( 38) to free some space. 148 Additional Information