Canon VIXIA HF R32 VIXIA HF R30 / HF R32 / HF R300 Instruction Manual - Page 180

[Notification Sounds]: A beep will accompany some operations like turning on the camcorder, the self-timer countdown, etc. • Set this to [j Off] to turn off notification sounds. • While pre-recording (A 98) is activated, the camcorder will not emit any notification sounds. [Custom Control Button]: On the lower right of the recording screen, a control button that is a shortcut to one of the functions in the [ Main Functions] panel is constantly displayed. By changing this setting, you can change the shortcut, which will allow you to access one of your frequently used functions quickly and conveniently. • In mode, the default setting is [Ò Decoration]. In other modes, it is [È Powered IS]. [Autostart Decoration]: When set to [i On], the decoration screen will open automatically when you stow the LCD panel with the LCD screen facing out. [Power Saving Mode]: Controls the camcorder's automatic power off settings. [Auto Power Off]: In order to save power when the camcorder is powered by a battery pack, it will automatically shut off if left without any operation for 5 minutes. • Approximately 30 seconds before the camcorder shuts off, [Auto Power Off] will appear. Operating any of the camcorder's controls while the message is displayed will prevent the camcorder from shutting off. • In standby mode, the camcorder will shut off after the time selected for the [Quick Start (Standby)] setting. [Quick Start (Standby)]: Select whether to activate the Quick Start function (A 51) when you close the LCD panel in a recording mode and the length of time after which the camcorder will end the standby mode and shut off automatically. • You can set Quick Start to [Off], for example, if the camcorder is set on a fixed position and you want to keep recording video with the LCD panel closed in order to conserve the battery's power. [Battery Info]: When you are using an optional battery pack that is com- patible with Intelligent System, this option displays a screen where you can verify the battery charge (as a percentage) and the remaining record- ing time ( , mode) or playback time ( , mode). [Control for HDMI]: Activates the HDMI-CEC (Consumer Electronics Control) function. When you connect the camcorder to an HDTV compatible with HDMI-CEC using the supplied HDMI cable, you can control the camcorder's playback using the remote control of the TV. 180 Š Additional Information