Canon VIXIA HF R32 VIXIA HF R30 / HF R32 / HF R300 Instruction Manual - Page 98

Powered IS You can use Powered IS to make the image stabilization even more powerful. Powered IS is most effective when you are stationary and zooming in on far subjects using high zoom ratios (the more you approach the telephoto end). Holding the LCD panel with your left hand will add to the stability of the shot. [FUNC.] > [È Powered IS] > [ON] > [X] • By default, the custom control button (A 180) is set to [È Powered IS]. NOTES • If the degree of camcorder shake is too high, the image stabilizer may not be able to fully compensate. • [ Dynamic] is available only when [Zoom Type] is set to [ Optical]. • For surveying and following shots, when you pan the camcorder from side to side or tilt it up and down, we recommend setting the IS mode to [ Dynamic] or [ Standard]. Pre-Recording The camcorder will start recording 3 seconds before you press Y, ensuring you do not miss important shooting opportunities. This is especially useful when it is difficult to predict when to start recording. Operating modes: 1 Activate the pre-recording function. [FUNC.] > [z Pre REC] > [ON] > [X] • z will appear on the screen. • Repeat, selecting [OFF], to turn off pre-recording. 98 Š Video