Canon VIXIA HF R40 Instruction Manual

Canon VIXIA HF R40 Manual

Get Canon VIXIA HF R40 PDF manuals and user guides View all Canon VIXIA HF R40 manuals
Add to My Manuals
Save this manual to your list of manuals

Canon VIXIA HF R40 manual content summary:

  • Canon VIXIA HF R40 | Instruction Manual - Page 1
    PUB. DIE-0431-000B HD Camcorder Instruction Manual 64
  • Canon VIXIA HF R40 | Instruction Manual - Page 2
    of explosion if the wrong type of batteries are attached. Use only the same type of batteries. • Do not expose batteries or product to excessive heat such as the to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the
  • Canon VIXIA HF R40 | Instruction Manual - Page 3
    HD Camcorder, VIXIA HF R42 / VIXIA HF R40 / VIXIA HF R400 the instructions, may and on, the user is encouraged to try unless otherwise specified in the manual. If such changes or that any health problems are associated with Canon U.S.A., Inc. One Canon Park, Melville, NY 11747, USA Tel No. 1-800-OK-CANON
  • Canon VIXIA HF R40 | Instruction Manual - Page 4
    Canon HD Camcorder VIXIA HF R42 / VIXIA HF R40 / VIXIA HF R400 and all its accessories. 1 Read these instructions. 2 Keep these instructions. 3 Heed all warnings. 4 Follow all instructions of time. 11 Refer all servicing to qualified service personnel. Servicing is required when the apparatus has
  • Canon VIXIA HF R40 | Instruction Manual - Page 5
    REGIONS OF USE VIXIA HF R42 and VIXIA HF R40 are in compliance (as of January 2013) with the radio signal regulations of the regions listed below. For details on other regions where they can be used, make inquiries with the contacts listed on the back side of this instruction manual. REGIONS Canada,
  • Canon VIXIA HF R40 | Instruction Manual - Page 6
    Protected Setup Identifier Mark is a mark of the Wi-Fi Alliance. • Other names and products not mentioned above may be trademarks or registered trademarks of their respective companies. • This device incorporates exFAT technology licensed from Microsoft. • "Full HD 1080" refers to Canon camcorders
  • Canon VIXIA HF R40 | Instruction Manual - Page 7
    You can use a smartphone as a remote control and record movies from a distance (A 125). • You can wirelessly connect the camcorder to your home network and upload your recordings to CANON iMAGE GATEWAY (A 130). This will allow you to even share your videos on YouTube and Facebook. You can share your
  • Canon VIXIA HF R40 | Instruction Manual - Page 8
    unique movies with distinctive looks. Face Detection (A 76) The camcorder automatically detects people's faces and adjusts the focus and other settings for beautiful results. Image Stabilization Dynamic IS (A 75) compensates for camcorder shake when you shoot video while walking. Powered IS (A 76)
  • Canon VIXIA HF R40 | Instruction Manual - Page 9
    Your Recordings on Other Devices Connect the camcorder to an HDTV (A 105). Copy your recordings to an external video recorder (A 119). Upload recordings to your computer (A 111). Save your recordings. Copy the camcorder's entire memory onto an external hard drive (A 116). Upload your MP4
  • Canon VIXIA HF R40 | Instruction Manual - Page 10
    (A 126). Save your recordings on an iPhone or iPad and play them back (A 128). Connect the camcorder to an access point on your home network and then share your recordings on CANON iMAGE GATEWAY (A 130). From there, you can make online albums to enjoy your recordings. After connecting the
  • Canon VIXIA HF R40 | Instruction Manual - Page 11
    7 Exciting Features and New Functions 15 About this Manual 17 Getting to Know the Camcorder 17 Supplied Accessories and CD-ROM 19 Names of Parts „ Preparations 21 Getting Started 21 Charging the Battery Pack 23 Turning On the Camcorder 24 Using the Grip Belt 25 Opening the Lens
  • Canon VIXIA HF R40 | Instruction Manual - Page 12
    „ Basic Shooting and Playback 41 Basic Recording 41 Shooting Video 43 About the Smart AUTO function 45 Intelligent IS 46 Taking Photos 47 Zooming 50 Basic Playback 50 Playing Back Video 54 Viewing Photos 56 Deleting Scenes 58 Deleting Photos „ Advanced Shooting 60 Selecting
  • Canon VIXIA HF R40 | Instruction Manual - Page 13
    87 Audio Recording Level 89 Using Headphones 90 Using an External Microphone „ Advanced Playback and Editing 92 Capturing Video Snapshot Dividing Scenes 100 Trimming Scenes 101 Slideshow „ External Connections 102 Terminals on the Camcorder 103 Connection Diagrams 105 Playback on a TV
  • Canon VIXIA HF R40 | Instruction Manual - Page 14
    iOS Device 130 Sharing Recordings with CANON iMAGE GATEWAY 136 Playback on a Computer Trouble? 158 Troubleshooting 164 List of Messages 175 Do's and Don'ts 175 Handling Precautions 179 Maintenance/Others 180 Using the Camcorder Abroad 181 General Information 181 Accessories 182 Optional Accessories
  • Canon VIXIA HF R40 | Instruction Manual - Page 15
    Manual Thank you for purchasing the Canon VIXIA HF R42 / VIXIA HF R40 / VIXIA HF R400. Please read this manual carefully before you use the camcorder and retain it for future reference. Should your camcorder fail to operate correctly, refer to Troubleshooting (A 158). Conventions Used in this Manual
  • Canon VIXIA HF R40 | Instruction Manual - Page 16
    will record the photo after a 10-second countdown. The countdown appears on the screen. The names of physical buttons and switches on the camcorder are indicated within a "button" frame. For example Y. The > arrow is used to abbreviate menu selections. For a detailed explanation on how to use the
  • Canon VIXIA HF R40 | Instruction Manual - Page 17
    AVCHD movies and transfer music data from the supplied Canon VIXIA CD-ROM (see next page) to the camcorder. For details on using the software, refer to the Transfer Utility LE Software Guide included with the downloaded software. NOTES • The camcorder may make a rattling sound if it is shaken (A 161
  • Canon VIXIA HF R40 | Instruction Manual - Page 18
    The Canon VIXIA CD-ROM is also supplied with the camcorder. The CDROM contains the following components: - Instruction Manual - The full-version instruction manual of the camcorder (this PDF file). - ImageBrowser EX - The CD-ROM contains an automatic installer for the software ImageBrowser EX, which
  • Canon VIXIA HF R40 | Instruction Manual - Page 19
    Left side view 1 23 4 56 7 8 Right side view 9 1 (playback mode) button (A 40) 2 ON/OFF button (A 23) 3 Memory card slot cover 4 MIC (microphone) terminal (A 91) 5 AV OUT terminal (A 102, 104)/ × (headphones) terminal (A 89) 6 HDMI OUT terminal (A 102, 103) 7 USB terminal (A 102, 104) 8 Memory
  • Canon VIXIA HF R40 | Instruction Manual - Page 20
    (A 41) A k 64Wi-Fi antenna (A 124) LCD panel Ah Back view Aj Ak Al Ak A l POWER/CHG (charge) indicator: Green - On Red - Charging (A 21) S q Battery attachment unit (A 21) S a Serial number Sq Bottom view Sa Ss Sd S s Tripod socket (A 176) S d BATTERY RELEASE switch (A 22) 20 Š Introduction
  • Canon VIXIA HF R40 | Instruction Manual - Page 21
    before plugging the power cord into the power outlet. 2 Connect the compact power adapter to the camcorder's DC IN terminal. 3 Attach the battery pack to the camcorder. Press the battery pack softly into the battery attachment unit and slide it up until it clicks in place. ᕃ ᕄ DC IN terminal For
  • Canon VIXIA HF R40 | Instruction Manual - Page 22
    the indicator flashes, refer to Troubleshooting (A 161). To remove the battery pack 1 Slide d in the direction of the arrow and hold it pressed down. ᕄ 2 Slide the battery pack and then pull it out. ᕃ BATTERY RELEASE switch IMPORTANT • Turn off the camcorder before connecting or disconnecting
  • Canon VIXIA HF R40 | Instruction Manual - Page 23
    for information on how to recycle this battery. Turning On the Camcorder You can turn the camcorder on and off by opening and closing the LCD panel. The first time you turn on the camcorder, the initial setup screens will appear and guide you through the basic settings (A 31). Preparations Š 23
  • Canon VIXIA HF R40 | Instruction Manual - Page 24
    the LCD panel or press . [ NOTES • You can use the > q > [Power On Using LCD Panel] setting so that you can turn the camcorder on and off only by pressing . Using the Grip Belt Fasten the grip belt. Adjust the grip belt so that you can reach the zoom
  • Canon VIXIA HF R40 | Instruction Manual - Page 25
    , the initial setup screens will appear and guide you through the basic settings (A 31). Open the LCD panel 90 degrees. • You can rotate the panel 90 degrees downward. • You can rotate the panel 180 degrees toward the lens. Rotating the LCD panel 180 degrees can be useful to allow the camcorder to
  • Canon VIXIA HF R40 | Instruction Manual - Page 26
    180° 180° Subject can monitor the LCD screen 90° NOTES • About the LCD screen: The screen is produced using extremely high-pre- cision manufacturing techniques, with more than 99.99% of the pixels operating to specification. Less than 0.01% of the pixels may occasion- ally misfire or appear
  • Canon VIXIA HF R40 | Instruction Manual - Page 27
    cards that can be used, visit your local Canon Web site. Memory card type: . SD transfer speed of memory cards. When you buy a new memory card, look for the camcorder. When using memory cards with other devices, such as digital recorders, computers and card readers, make sure that the external
  • Canon VIXIA HF R40 | Instruction Manual - Page 28
    IMPORTANT • If you use an SDXC memory card with a computer OS that is not SDXC- compatible, you may be prompted to format the memory card. In such case, cancel the operation to prevent data loss. • After repeatedly recording, deleting and editing scenes (fragmented memory), it will take longer to
  • Canon VIXIA HF R40 | Instruction Manual - Page 29
    this is your first time to turn on the camcorder, the language selection screen of the initial setup screens will appear. 2 Press to turn off the camcorder. Make sure the POWER/CHG indicator is off. card once to release it. When the memory card springs out, pull it all the way out. Preparations Š
  • Canon VIXIA HF R40 | Instruction Manual - Page 30
    IMPORTANT • Memory cards have front and back sides that are not interchangeable. Inserting a memory card facing the wrong direction can cause a malfunction of the camcorder. Be sure to insert the memory card as described in step 4. 30 Š Preparations
  • Canon VIXIA HF R40 | Instruction Manual - Page 31
    The first time you turn on the camcorder, you will be guided by the camcorder's easy-to-follow setup screens to configure the camcorder's initial settings. You will set the date and time, movie format, and other basic functions. For details on how to use the touch screen, refer
  • Canon VIXIA HF R40 | Instruction Manual - Page 32
    of 1920x1080. 10 Touch [OK]. Setup is complete. The settings you selected will appear briefly and then the camcorder will be ready to record. NOTES . • When you do not use the camcorder for about 3 months, the built-in rechargeable lithium battery may discharge completely and the date and time
  • Canon VIXIA HF R40 | Instruction Manual - Page 33
    to adjust for daylight saving time. 4 Touch [X] to close the menu. Initializing the Memory Initialize memory cards when you use them with this camcorder for the first time. You can also initialize a memory card or the built-in memory (6/4 only) to permanently delete all the recordings it contains
  • Canon VIXIA HF R40 | Instruction Manual - Page 34
    be used without any problem. IMPORTANT • Initializing in advance using an external device (A 107). VIXIA CD-ROM to the memory card: - Windows users: Use the supplied software for AVCHD movies, Transfer Utility LE. For details, refer to the Software Guide (PDF file) of PIXELA's software. - Mac OS users
  • Canon VIXIA HF R40 | Instruction Manual - Page 35
    , such as ballpoint pens. - Operating the touch screen with wet or gloved hands. - Applying excessive force with your finger. Using the Menus Many of the camcorder's functions can be adjusted from the menus in the (Home) menu. In addition, you will find it useful to learn how to navigate the other
  • Canon VIXIA HF R40 | Instruction Manual - Page 36
    description of each menu. The menus that appear depend on whether the camcorder is in recording mode or playback mode. In recording mode In 37). Open this menu to select the movie format (A 60), video [ Recording Setup] quality (A 60), the memory used for recordings* (A 63) and whether to use
  • Canon VIXIA HF R40 | Instruction Manual - Page 37
    [ Remote Control+ After installing the remote control app, use your smartphone as a Streaming]* remote control to record movies with the camcorder (A 125). * 6/4 only. Menus Available in Playback Mode Menu Description [ Other Settings] Open the [ Other Settings] menus (A 37). The available
  • Canon VIXIA HF R40 | Instruction Manual - Page 38
    Operating modes: * SCN * In mode, access to functions is limited. 1 Touch [ ] on the upper left of the screen to open the (Home) menu. 2 Drag your finger left/right to bring [ Other Settings] to the center. 3 Touch the icon to open the [ Other Settings] menus. 4 Touch the tab of the desired
  • Canon VIXIA HF R40 | Instruction Manual - Page 39
    button of the desired function. Operating Modes Recording When recording, the camcorder's operating mode is determined by the [Shooting Mode] menu in the (Home) menu and the [Movie Format] option in the [ Recording Setup] menu. Perform the following procedure to set the shooting mode. Refer
  • Canon VIXIA HF R40 | Instruction Manual - Page 40
    the situation you are in (A 66). (Programmed Enjoy full access to menus, settings and advanced functions (A 68). AE mode) Playback Press the button to switch the camcorder between camera (recording) mode and playback mode. You can press when the camcorder is off to turn it on directly in
  • Canon VIXIA HF R40 | Instruction Manual - Page 41
    them back, and how to use other basic func- tions. To enjoy full access to menus and more advanced functions, refer to Advanced Shooting (A 60) test recording first to check that the camcorder is operating correctly. 1 Open the LCD panel to turn ᕄ on the camcorder. • 6/4 By default, movies are
  • Canon VIXIA HF R40 | Instruction Manual - Page 42
    to mode. (shooting mode button) > [N Auto] > [OK] • This step is not necessary the first time you use the camcorder. • To change the movie format, refer to Selecting the Movie Format (AVCHD/MP4) (A 60). Shooting mode button 4 Press Y to begin recording. • Press Y again to pause
  • Canon VIXIA HF R40 | Instruction Manual - Page 43
    69) to add a fun personal touch using stamps, drawings, image mix and more. About the Smart AUTO function In mode, the camcorder will automatically detect certain characteristics of the subject, background, lighting conditions, etc. It will then adjust various settings (focus, exposure, color
  • Canon VIXIA HF R40 | Instruction Manual - Page 44
    Smart AUTO icons Background → (color of the icon) Subject ↓ Bright* (gray) Blue skies* (light blue) Vivid colors* Sunsets (green/red) (orange) People (stationary) ( ) ( ) ( )- People (moving) ( ) ( ) ( )- Subjects other than people, such as landscapes ( ) ( ) ( ) Close objects /
  • Canon VIXIA HF R40 | Instruction Manual - Page 45
    after making important recordings. Canon shall not be liable for any loss or corruption of data. NOTES • About the power saving mode: If > q > [Auto Power Off] is set to [i On], the camcorder will shut off automatically to save power when it is powered by a battery pack and is left without
  • Canon VIXIA HF R40 | Instruction Manual - Page 46
    with the > > [LCD Brightness] setting. • If you plan on making a long recording while the camcorder is in a fixed position, such as on a tripod, you can record with the LCD panel closed in order to conserve the battery's power. In such case, make sure > q > [Power On Using LCD Panel] is set to
  • Canon VIXIA HF R40 | Instruction Manual - Page 47
    sure that the ACCESS indicator is off. 2 Close the LCD panel to turn off the camcorder. You can also press . 3 Slide the lens cover switch up. IMPORTANT • The ways you can zoom in and out: using the zoom lever on the camcorder or using the zoom controls on the touch screen. You can also select
  • Canon VIXIA HF R40 | Instruction Manual - Page 48
    for faster zooms. 3 Touch [START] to begin recording. Touch [STOP] to pause the recording. 4 Touch [X] to hide the zoom controls. Selecting the Zoom Type The camcorder offers three types of zoom - optical, advanced and digital. 48 Š Basic Shooting and Playback
  • Canon VIXIA HF R40 | Instruction Manual - Page 49
    uses the optical magnification ratio of the lens. [ Advanced] For advanced zoom, the camcorder processes the image beyond the range of the optical zoom to obtain a larger zoom without any deterioration in image quality. At full wide angle, the angle of view with advanced zoom is wider than the angle
  • Canon VIXIA HF R40 | Instruction Manual - Page 50
    Basic Playback Playing Back Video Operating modes: SCN 1 Press . Index screen button (next to [ ]) 2 If necessary, change the index screen. 6/4 [& ·] (index screen button) > Select the memory with the desired scene (& or ) and the movie format of the desired scene (· or ¸) > [OK] 7 [ ·] (index
  • Canon VIXIA HF R40 | Instruction Manual - Page 51
    ) or folder name (for MP4 movies; A 152). 3 Look for the scene you want to play back. 4 Touch the desired scene to play it back. • The camcorder will play back the scene selected and continue until the end of the last scene in the index screen. • Touch the screen to display the
  • Canon VIXIA HF R40 | Instruction Manual - Page 52
    3 Touch [K] twice when finished. During playback: ! Jump to the beginning of the scene. Double-tap to jump to the previous scene. " Jump to the beginning of the next scene. # Pause the playback. $ Fast playback* backward/forward. % Display the volume (A 52) and background music mix balance (A 95)
  • Canon VIXIA HF R40 | Instruction Manual - Page 53
    - Do not open the memory card slot cover. - Do not disconnect the power source or turn off the camcorder. - Do not press . • You may not be able to play back with this camcorder movies recorded on a memory card using another device. NOTES • You can use the > > [Display Date/Time] setting to
  • Canon VIXIA HF R40 | Instruction Manual - Page 54
    built-in speaker while the supplied High Speed HDMI cable or optional STV-250N Stereo Video Cable is connected to the camcorder. Viewing Photos Operating modes: SCN 1 Press . 2 Open the [ Photo Playback] index screen. > [ Photo Playback] 3 6/4 If necessary, change the index screen. [&] (index
  • Canon VIXIA HF R40 | Instruction Manual - Page 55
    ! 6/4 Index screen button. Displays the currently selected memory. Press to change the index screen. " Drag your finger left/right for the next/previous index page*. # Display the next/previous index page. $ Folder name (A 152) * While browsing through index pages, a larger scroll bar will appear at
  • Canon VIXIA HF R40 | Instruction Manual - Page 56
    . - Do not press . • The following image files may not be displayed correctly. - Images not recorded with this camcorder. - Images edited on a computer. - Images whose file names have been changed. Deleting Scenes You can delete those scenes and stories that you are not interested
  • Canon VIXIA HF R40 | Instruction Manual - Page 57
    Deleting Scenes from the Index Screen Operating modes: SCN 1 Open the desired index screen (A 50, 93, 94). To delete all the scenes recorded on a specific date, drag your finger left/right until a scene you want to delete appears. 2 Delete the scenes. [Edit] > [Delete] > Desired option* > [Yes]** >
  • Canon VIXIA HF R40 | Instruction Manual - Page 58
    are being deleted). - Do not open the memory card slot cover. - Do not disconnect the power source or turn off the camcorder. - Do not change the camcorder's operating mode. NOTES • To delete all movies and make all recordable space available again you may prefer to initialize the memory (A 33
  • Canon VIXIA HF R40 | Instruction Manual - Page 59
    was created. IMPORTANT • Be careful when deleting photos. Deleted photos cannot be recovered. • Photos that were protected with other devices cannot be deleted with this camcorder. Basic Shooting and Playback Š 59
  • Canon VIXIA HF R40 | Instruction Manual - Page 60
    can easily be played back on smartphones or uploaded to the Web. Operating modes: SCN > [ Recording Setup] > [Movie Format] > Desired movie format > [K] > [X] Selecting the Video Quality The camcorder offers several video quality options (measured by bit rate*) for recording movies. For AVCHD movies
  • Canon VIXIA HF R40 | Instruction Manual - Page 61
    > [ Recording Setup] > [Video Quality] > 60P or MXP mode cannot be saved on AVCHD discs. Use an external Blu-ray Disc recorder compliant with AVCHD Ver. 2.0 specifications to copy you may not be able to play back your recordings. • The camcorder uses a variable bit rate (VBR) to encode video so the
  • Canon VIXIA HF R40 | Instruction Manual - Page 62
    music files (background music) and 5 MB of image files (image mix frames). 4 A single scene can be recorded continuously for 12 hours; at that point, the camcorder will stop for about 3 seconds before resuming recording. 5 Recorded in 1,280x1,080 resolution. 62 Š Advanced Shooting
  • Canon VIXIA HF R40 | Instruction Manual - Page 63
    the relay recording so if the assigned memory becomes full while recording movies, the recording will continue uninterrupted on the other memory. Operating modes: SCN Activate the desired function. > [ Recording Setup] > [Dual/Relay Recording] > Desired function > [K] > [X] NOTES • Dual recording is
  • Canon VIXIA HF R40 | Instruction Manual - Page 64
    is activated, decoration is not available. • When you use relay recording, there will be a momentary stop in the scene at the point where the camcorder switches from one memory to another. Baby Mode Baby's first smile, first step, first word. When you use mode, you can easily capture those
  • Canon VIXIA HF R40 | Instruction Manual - Page 65
    Cinema Mode and Cinema-Look Filters In mode, the camcorder will adjust the frame rate and several other picture-related settings to give your recordings a cinematic look. In this mode you can also use a variety
  • Canon VIXIA HF R40 | Instruction Manual - Page 66
    2 Select the desired cinemalook filter. Options ( Default value) The camcorder offers 7 cinemalook filters. Select the desired filter while previewing the Scene Modes Recording in a very bright ski resort or capturing the full colors of a sunset or a fireworks display becomes as easy as selecting
  • Canon VIXIA HF R40 | Instruction Manual - Page 67
    (shooting mode button) > [ƒ Scene] > [OK] > Desired Special Scene mode > [OK] Shooting mode button Options ( Default value) [ Portrait] The camcorder uses a large aperture, to achieve a sharp focus on the subject while blurring the background. [ Sports] To record sports scenes such as tennis or
  • Canon VIXIA HF R40 | Instruction Manual - Page 68
    on the screen. - Autofocus may not work as well as in other modes. In such case, adjust the focus manually. • [ Fireworks]: - To avoid camcorder blur (blur due to the camcorder moving) we recommend using a tripod. Programmed AE Mode: Adjusting Settings to Match Your Needs Give yourself the most
  • Canon VIXIA HF R40 | Instruction Manual - Page 69
    Operating modes: SCN (shooting mode button) > [' Programmed AE] > [OK] Shooting mode button Decoration: Adding a Personal Touch Add a new level of enjoyment to your scenes by decorating them. You can add animated graphics, stamps and even your own freehand drawing easily just by simply using your
  • Canon VIXIA HF R40 | Instruction Manual - Page 70
    ! Canvas - The area where you will draw and see your decorations in action. " Toolbar. # [Ó Pens and Stamps] Select the type of pen or stamp and its color. You can also save a single canvas or load a previously saved canvas. $ [× Animated Stamps] Select animated stamps to add to your
  • Canon VIXIA HF R40 | Instruction Manual - Page 71
    Load]2 or [ Load]2 > [Yes] > [K]. 1 The freehand drawings and stamps will be saved in the built-in memory (6/ 4 only) or on a memory card (7 only). 2 The camcorder will apply the last freehand drawings and stamps that were saved in the built-in memory (6/4 only) or on a memory card (7 only). To use
  • Canon VIXIA HF R40 | Instruction Manual - Page 72
    Operating modes: SCN 1 Touch [ ]. • The screen with stamps for mode will appear. 2 Select and set the desired stamps. • To add the age stamp: Touch [0 days] > [w] > Í/Î to set baby's date of birth > [K]. • To add the height stamp: Touch [20 in.] > [w] > Í/Î to set baby's height > [K]. • To add
  • Canon VIXIA HF R40 | Instruction Manual - Page 73
    POINTS TO CHECK • 6/4 Before performing this procedure, make sure the memory with the image mix data is selected (A 63). At the time of purchase, image mix data is in the built-in memory. 1 Touch [Ü] to open the [Select Image] screen and then touch [ON]. 2 Touch [+] or [-] to select a different
  • Canon VIXIA HF R40 | Instruction Manual - Page 74
    5 Touch [K] to mix your image with live video. Decorating Scenes during Playback Operating modes: SCN 1 From the index screen (A 50), play back the scene you want to decorate. 2 Touch the screen to display the playback controls. 3 Touch [Ò] to open the decoration screen. 4 Decorate the scene using
  • Canon VIXIA HF R40 | Instruction Manual - Page 75
    . - Changing the movie format (AVCHD/MP4), video quality or frame rate. Advanced Image Stabilization The image stabilizer reduces camcorder blur (blur due to the camcorder moving) so you can get nice, stable shots. Select the image stabilization mode according to the shooting conditions. Operating
  • Canon VIXIA HF R40 | Instruction Manual - Page 76
    shake, such as when shooting while walking, and is more effective as the zoom approaches full wide angle. [ Standard] Compensates for a lower degree of camcorder shake, such as when shooting while remaining stationary, and is suitable for shooting natural-looking scenes. [j Off] Use this setting
  • Canon VIXIA HF R40 | Instruction Manual - Page 77
    will optimize the settings for that person. Other faces will have gray frames. 3 Touch a different face on the touch screen to optimize the camcorder's settings for that person. • You can also touch other moving objects, such as a pet. • A white double frame will appear around the subject and
  • Canon VIXIA HF R40 | Instruction Manual - Page 78
    will make it easier to track. However, if there is another subject in the vicinity that shares similar characteristics to the selected subject, the camcorder may start tracking the incorrect subject. Touch the screen again to select the desired subject. • In certain cases, tracking may not be able
  • Canon VIXIA HF R40 | Instruction Manual - Page 79
    dark (underexposed) or subjects under very strong lights may appear too bright or glaring (overexposed). To correct this, you can adjust the exposure manually or use the Touch AE function to automatically set the optimal exposure for the subject you select. This is convenient when the brightness of
  • Canon VIXIA HF R40 | Instruction Manual - Page 80
    as necessary. • You can touch [n] instead to adjust the exposure manually without activating the Touch AE function. • The manual adjustment dial appears and the adjustment value is set at ±0. • Touch [n] again to return the camcorder to automatic exposure. 3 Touch [Ï] or [Ð] or drag your finger
  • Canon VIXIA HF R40 | Instruction Manual - Page 81
    You have the option to further adjust the focus manually as necessary. • You can touch [D] instead to adjust the focus manually without activating the Touch AF function. • The manual focus controls appear. • Touch [D] again to return the camcorder to autofocus. 3 Touch and hold [F] or [E] to adjust
  • Canon VIXIA HF R40 | Instruction Manual - Page 82
    the focus manually, you can touch inside the frame to automatically focus on that spot. Pre-Recording The camcorder will start recording memory will start 3 seconds before Y was pressed. NOTES • The camcorder will not record the full 3 seconds prior to pressing Y if the button was pressed within
  • Canon VIXIA HF R40 | Instruction Manual - Page 83
    you select [Å Custom WB], set the custom white balance with the following procedure before touching [X]. To set the custom white balance Point the camcorder at a white object, so it fills the whole screen, and touch [Set WB]. When the adjustment is completed, Å stops flashing and disappears. The
  • Canon VIXIA HF R40 | Instruction Manual - Page 84
    will record the photo after a 10-second countdown. The countdown appears on the screen. • Photos cannot be recorded while the camcorder is set to mode. NOTES • Once the countdown has begun, any of the following actions will cancel the self timer. - Pressing Y, when recording movies. - Touching
  • Canon VIXIA HF R40 | Instruction Manual - Page 85
    per second) to change the look of your movies. Operating modes: SCN > [ Recording Setup] > [Video Quality] > [I] > Desired frame rate > [K] > [K] > [X] Using tele macro, the camcorder can focus at a shorter distance (up to 50 cm (1.6 ft.) from the subject at full telephoto), allowing you get
  • Canon VIXIA HF R40 | Instruction Manual - Page 86
    Scene mode in SCN mode. • Tele macro cannot be turned on/off while recording. Audio Scenes You can have the camcorder optimize the audio settings of the built-in microphone by selecting the audio scene that matches your surroundings. This will greatly enhance the sense of "being there." Operating
  • Canon VIXIA HF R40 | Instruction Manual - Page 87
    scenes in forests. The camcorder clearly captures sound as it external microphone. You can display the audio level indicator while recording. Operating modes: SCN Manual Adjustment of the Audio Recording Level 1 Open the manual audio recording level adjustment screen. > [ä Mic. Level] > [n] (manual
  • Canon VIXIA HF R40 | Instruction Manual - Page 88
    after activating the manual adjustment of the audio recording level. You can choose to display it also when the audio level is adjusted automatically. > [ä Mic. Level] > [m] (automatic) > [Audio Level Indicator] > [X] NOTES • When you are using a microphone connected to the MIC terminal, including
  • Canon VIXIA HF R40 | Instruction Manual - Page 89
    Using Headphones Use headphones for playback or to check the audio level while recording. The headphones are connected to the AV OUT/× terminal, which is used for both the headphones and the audio/video output. Before connecting the headphones, follow the procedure below to change the function of
  • Canon VIXIA HF R40 | Instruction Manual - Page 90
    while Wi-Fi functions are in use. Using an External Microphone When recording in very quiet surroundings, the built-in microphone may pick up the sound of the camcorder's internal machinery. In such case, we recommend using an external microphone. Operating modes: SCN 90 Š Advanced Shooting
  • Canon VIXIA HF R40 | Instruction Manual - Page 91
    but audio recording levels may vary. Connect the external microphone to the MIC terminal. NOTES • When you are using a microphone connected to the MIC terminal, the audio level indicator will be displayed automatically. • When referring to the instruction manual of the WM-V1, note that the procedure
  • Canon VIXIA HF R40 | Instruction Manual - Page 92
    1 Play back the scene from which you want to capture the video snapshot scene (A 50). 2 Press Y to capture the video snapshot scene. The camcorder captures the video snapshot scene for about 4 seconds (the blue frame serves as a visual progress bar), and then enters playback pause mode. 3 Touch the
  • Canon VIXIA HF R40 | Instruction Manual - Page 93
    • Video snapshot scenes cannot be captured from scenes shorter than 1 second. • When the source scene is itself a video snapshot scene, you may not be able to capture a video snapshot scene depending on the length of the source scene and the length currently selected for video snapshot scenes. •
  • Canon VIXIA HF R40 | Instruction Manual - Page 94
    so may result in permanent data loss. - Do not open the memory card slot cover. - Do not disconnect the power source or turn off the camcorder. - Do not press . Playing Back Video Snapshot Scenes When you record video snapshot scenes in AVCHD, you can play back only those scenes to create
  • Canon VIXIA HF R40 | Instruction Manual - Page 95
    - Do not change the camcorder's operating mode. Playback with Background Music You can play back movies (or a photo slideshow) using one of the supplied music tracks as background music. Operating modes: SCN The supplied VIXIA CD-ROM contains 3 music tracks you can use as background music. 6/4: The
  • Canon VIXIA HF R40 | Instruction Manual - Page 96
    2 Select the music track. > [ Other Settings] > s > [Select Music] > [i On] > [Í] or [Î] to select the desired music track ! Select the desired music track. " Adjust the background music balance. # Play back the original sound (no background music). $ Delete the music track selected. % Listen to the
  • Canon VIXIA HF R40 | Instruction Manual - Page 97
    initialized.) To transfer music files from the supplied VIXIA CD-ROM to the memory card: - Windows users: Use the supplied software for AVCHD movies, Transfer Utility LE. For details, refer to the Software Guide (PDF file) of PIXELA's software. - Mac OS users: Use Finder to transfer music files from
  • Canon VIXIA HF R40 | Instruction Manual - Page 98
    2 Open the scene's [Timeline] screen. [ ] > Desired scene • The [Timeline] screen appears. The large thumbnail will show the first frame of the scene. Below it, the timeline ruler shows frames taken from the scene at fixed intervals. 3 Touch the desired frame in the timeline ruler to start playing
  • Canon VIXIA HF R40 | Instruction Manual - Page 99
    Dividing Scenes You can divide AVCHD scenes in order to leave out the best parts and later cut out the rest. Operating modes: SCN 1 Play back the desired scene (A 50). 2 Touch the screen and then touch [Ý] to pause the playback. 3 Open the screen for dividing scenes. [Edit] > [Divide] 4 Bring the
  • Canon VIXIA HF R40 | Instruction Manual - Page 100
    Trimming Scenes You can trim MP4 scenes by removing everything up to a certain point or everything after a certain point. By doing so, you leave only memorable moments to keep for posterity. Operating modes: SCN 1 Play back the desired scene (A 50). 2 Touch the screen and then touch [Ý] to pause the
  • Canon VIXIA HF R40 | Instruction Manual - Page 101
    Slideshow You can play a slideshow of all the photos and even set it to music. Operating modes: SCN 1 Open the [ Photo Playback] index screen (A 54). 2 Select the music track. > [ Other Settings] > > [Select Music] > [i On] > [Í] or [Î] to select the desired music track > [K] 3 Touch the photo
  • Canon VIXIA HF R40 | Instruction Manual - Page 102
    cable to connect to a computer or other digital devices with standard-A receptacles; or use the optional UA-100 USB Adapter to connect to the camcorder an external hard drive or similar storage device with a standard-A cable (6/ 4 only). * When connecting the supplied High Speed HDMI cable to the
  • Canon VIXIA HF R40 | Instruction Manual - Page 103
    is for output only. Do not connect it to an HDMI output terminal on an external device, as this may damage the camcorder. - While the camcorder is connected to an HDTV using connection !, there will be no video output from the AV OUT/× terminal. - Correct operation cannot be guaranteed when
  • Canon VIXIA HF R40 | Instruction Manual - Page 104
    a VCR with audio/video input terminals. Change the following settings on the camcorder: - [ Other Settings] > > [TV Type] according to the TV , to a compatible digital video recorder to copy your recordings, or to an external hard drive to easily save a perfect copy of an entire memory (6/4 only
  • Canon VIXIA HF R40 | Instruction Manual - Page 105
    music files from the supplied VIXIA CD-ROM to a memory card in the camcorder in order to use them as background music. For details, refer to the Software Guide (PDF file) of PIXELA's software. - To save your recordings on a computer. - To save a memory onto an external hard drive. • Sound from the
  • Canon VIXIA HF R40 | Instruction Manual - Page 106
    the aspect ratio of the TV manually. * Refer to the instruction manual of the device. Depending on the device used, correct playback may not be possible even if the device is AVCHD-compatible. In such case, play back the recordings on the memory card using the camcorder. 106 Š External Connections
  • Canon VIXIA HF R40 | Instruction Manual - Page 107
    . • Touch a selected scene to remove the checkmark. To remove all checkmarks at once, touch [Remove All] > [Yes]. 2 After selecting all the desired scenes, touch [OK]. External Connections Š 107
  • Canon VIXIA HF R40 | Instruction Manual - Page 108
    Operating modes: SCN 1 Open the [ Photo Playback] index screen in the built-in memory (A 54). 2 Copy the photos. [Edit] > [Copy (&' )] > Desired option* > [Yes]** > [OK] 108 Š External Connections
  • Canon VIXIA HF R40 | Instruction Manual - Page 109
    loss. - Do not open the memory card slot cover. - Do not disconnect the power source or turn off the camcorder. - Do not press . NOTES • In the following cases, you will not be able to copy recordings to the 152). - If there is no memory card in the memory card slot. External Connections Š 109
  • Canon VIXIA HF R40 | Instruction Manual - Page 110
    a movie, you cannot add decorations. 5 Touch [START] to convert the scene. Touch [STOP] to interrupt the operation while it is in progress. 6 Touch [OK]. 110 Š External Connections
  • Canon VIXIA HF R40 | Instruction Manual - Page 111
    recorded. Download the software and install it before you connect the camcorder to the computer for the first time. An Internet connection is required to download the software. Perform the following procedures while referring to the supplied 'Transfer Utility LE Startup Guide'. External Connections
  • Canon VIXIA HF R40 | Instruction Manual - Page 112
    from PIXELA's Web site. Visit the PIXELA's site to download the zip file, which contains the software and instruction manual. http://pixela.jp/cetule_dl/ 2 Uncompress the zip file. The zip file contains the installer (setup.exe) and the Software Guide (PDF file). 3 Run the installer to install the
  • Canon VIXIA HF R40 | Instruction Manual - Page 113
    movies and photos to your computer and easily organize them. Refer to the 'ImageBrowser EX User Guide' (PDF file) for the full system requirements and other information. Installation Install the software before you connect the camcorder to the computer for the first time. Make sure to install the
  • Canon VIXIA HF R40 | Instruction Manual - Page 114
    : From the Start Menu*, All Programs > Canon Utilities > ImageBrowser EX Mac OS: In the Dock, on the Desktop. * Windows 8 users: Display the Desktop screen first. If you cannot find the icon, check your Internet connection and install the software again. First-time connection to a computer running
  • Canon VIXIA HF R40 | Instruction Manual - Page 115
    EX Instruction Manual', which can be accessed through the ? menu on the upper right of the software's screen. IMPORTANT • When the camcorder is Users of Windows 8, Windows 7, Windows Vista, Windows XP and Mac OS X: Your camcorder is equipped with the standard Picture Transfer Protocol External
  • Canon VIXIA HF R40 | Instruction Manual - Page 116
    you to transfer photos (JPEG only) simply by connecting the camcorder to a computer using the supplied USB cable, without having to install the supplied software ImageBrowser EX. 6/4 Memory Save: Saving an Entire Memory onto an External Hard Drive You can easily save all the movies and photos
  • Canon VIXIA HF R40 | Instruction Manual - Page 117
    and the hard drive will end, which may lead to the corruption of data in the hard drive. NOTES • Initialize the external hard drive (A 118) when you use it with this camcorder for the first time. • You cannot select both the built-in memory and memory card to save them simultaneously. • You
  • Canon VIXIA HF R40 | Instruction Manual - Page 118
    access indicator is on or flashing. - Do not disconnect the USB cable. - Do not disconnect the camcorder or the external hard drive. - Do not press . Initializing the External Hard Drive 1 Power the camcorder using the compact power adapter. Do not disconnect the power source or turn off the
  • Canon VIXIA HF R40 | Instruction Manual - Page 119
    any problem. 5 Safely end the connection to the external hard drive before physically disconnecting it. IMPORTANT • Initializing the external hard device. Copying Recordings to an External Video Recorder Operating modes: SCN In High Definition Connect the camcorder to Blu-ray Disc recorders
  • Canon VIXIA HF R40 | Instruction Manual - Page 120
    refer to the instruction manual of the digital video recorder. In Standard Definition You can copy your movies by connecting the camcorder to a VCR . Connecting Connect the camcorder to the VCR using Connection ". Refer to Connection Diagrams (A 104). Recording 1 External recorder: Load a blank
  • Canon VIXIA HF R40 | Instruction Manual - Page 121
    software is compatible with computers running Windows or Mac OS operating systems. Refer to Saving MP4 Movies and Photos (Windows/Mac OS) (A 113). Connecting to the Computer and Uploading Your Recordings Refer to the relevant sections in the 'ImageBrowser EX Instruction Manual' (PDF file). External
  • Canon VIXIA HF R40 | Instruction Manual - Page 122
    camcorder, starting with the Wi-Fi network setup needed to add your camcorder to an existing Wi-Fi network. Introduction to Wi-Fi When you use the camcorder After you download the CameraAccess app2, use your iOS device or Android smartphone to remotely control the camcorder and make recordings
  • Canon VIXIA HF R40 | Instruction Manual - Page 123
    or similar device Wi-Fi connection After you download the Movie Uploader app4, wirelessly connect the camcorder to an iOS device (A 128) to save connect the camcorder to a wireless router (access point) on your home network. Use this connection if you plan to connect to CANON iMAGE GATEWAY
  • Canon VIXIA HF R40 | Instruction Manual - Page 124
    LAN router or wireless network router. • Make sure the optional WM-V1 Wireless Microphone is not attached to the camcorder. Wi-Fi functions are not available when the microphone is attached. About the Wi-Fi antenna When using the camcorder's Wi-Fi functions, do not cover the back portion of the
  • Canon VIXIA HF R40 | Instruction Manual - Page 125
    on your smartphone. The app can be downloaded for free from the following sites (English only). App Store: http://itunes.com/apps/cameraaccess Google Play™: http://play.google.com/store/apps/details?id=jp.co.pixela.cameraaccess 1 Camcorder: Set the camcorder to receive remote control commands. Wi-Fi
  • Canon VIXIA HF R40 | Instruction Manual - Page 126
    camcorder, play them back and even download them.* This conveniently allows you to view your recordings while you are out. * Depending on the device, OS, browser, movie format and video quality, you may not be able to play back or download recordings. For details, visit your local Canon
  • Canon VIXIA HF R40 | Instruction Manual - Page 127
    the connection will be established automatically without entering the password. 5 Smartphone: Start the Web browser. 6 Smartphone: Enter the URL that appears on the camcorder's screen into the Web browser's address bar. • The Remote Browse screen will appear. • The URL is always the same so you may
  • Canon VIXIA HF R40 | Instruction Manual - Page 128
    Uploading Videos Using an iOS Device Using the Movie Uploader app* for iOS devices, you can connect the camcorder to the device to upload your movies to YouTube and Facebook even when you are away from your Uploader app on your iOS device. The app can be downloaded for free 128 Š Wi-Fi Functions
  • Canon VIXIA HF R40 | Instruction Manual - Page 129
    device: Enter the password. • [Connected] will appear on the camcorder's screen and the connection will be established. • If you have already Movie Uploader app, visit PIXELA's Web site. http://www.pixela.co.jp/oem/canon/e/movieuploader/ (English only) • The following types of MP4 scenes will be
  • Canon VIXIA HF R40 | Instruction Manual - Page 130
    in this text to refer to various Internet services supported by CANON iMAGE GATEWAY. Wireless router (Access point) CANON iMAGE GATEWAY CANON iMAGE GATEWAY is a site that provides various photo-related services for owners of qualified Canon products. After you complete the free registration online
  • Canon VIXIA HF R40 | Instruction Manual - Page 131
    use). Setting the Desired Web Services in the Camcorder Using the supplied software CameraWindow, log in to CANON iMAGE GATEWAY and set the Web services you want to use. Refer to 'CameraWindow Instruction Manual' for details on using the software. Operating modes: SCN 1 Camcorder: Open the [y Movie
  • Canon VIXIA HF R40 | Instruction Manual - Page 132
    6 Computer: Click Edit Web Services > Desired Web service > Edit > Follow the onscreen instructions and enter your account information for the selected Web service > Set > Finish. The camera settings screen will appear again. 7 Computer: Select the Web service to set in the camcorder and then click
  • Canon VIXIA HF R40 | Instruction Manual - Page 133
    even set up to 20 e-mail addresses. * The available Web services may be updated. For details, refer to the help module of CANON iMAGE GATEWAY. NOTES • If the date set in the camcorder is not correct, the camcorder cannot connect to CANON iMAGE GATEWAY. Make sure the date is correct before trying
  • Canon VIXIA HF R40 | Instruction Manual - Page 134
    on the camcorder's screen and the connection will be established. 4 Select the desired Web service. • Select one of the available Web services other than files you have sent and the various settings for the Web services. For details on CANON iMAGE GATEWAY, refer to the Help module (in the upper
  • Canon VIXIA HF R40 | Instruction Manual - Page 135
    20 e-mail addresses in the camcorder. 1 Computer: Start CameraWindow and log in to CANON iMAGE GATEWAY. Refer to Setting the Desired Web Services in the Camcorder (A 131). 2 Computer: Click Edit Web Services > Desired Web service > Edit > Follow the onscreen instructions and set the e-mail address
  • Canon VIXIA HF R40 | Instruction Manual - Page 136
    the camcorder's screen and the connection will be established. 4 Touch [ ]. 5 Perform steps 5 to 8 of Sharing Your Recordings Using Web Services (A to the instruction manuals for the computer, software and access point. LAN cable Operating modes: Access point Computer SCN 1 Camcorder: Activate
  • Canon VIXIA HF R40 | Instruction Manual - Page 137
    router's settings and capability, playback may take time to start or may not appear smooth. For details, refer to Troubleshooting (A 163). Wi-Fi Connection Using an Access Point The camcorder can connect to a Wi-Fi network using a wireless router (access point) and even remember the settings for the
  • Canon VIXIA HF R40 | Instruction Manual - Page 138
    Protected Setup (WPS) (A 138). [Search for Access Points] Following the camcorder's onscreen instructions, Manual Setup] You manually enter the wireless router's name, password and other network settings. This method is recommended for advanced users of Wi-Fi networks. For details, see Manual Setup
  • Canon VIXIA HF R40 | Instruction Manual - Page 139
    to the router's instruction manual. 1 [WPS: camcorder's screen. • The camcorder will connect to the wireless router. • You can touch [Stop] and then [OK] to interrupt the Wi-Fi Protected Setup Services (A 133) or Playback on a Computer (A 136) as necessary. Searching for Access Points The camcorder
  • Canon VIXIA HF R40 | Instruction Manual - Page 140
    Wi-Fi Settings (A 142) or Sharing Your Recordings Using Web Services (A 133), as necessary. Using the virtual keyboard When you need SSID) cannot be detected due to the stealth function being enabled. Manual setup is for advanced users of Wi-Fi networks. To enter text for the various settings
  • Canon VIXIA HF R40 | Instruction Manual - Page 141
    Touch [Automatic] or [Manual] to select how to Services (A 133), as necessary. NOTES • The Wi-Fi functions available and the setup method will vary depending on the specifications and characteristics of the Wi-Fi network you want to use. Viewing and Changing Wi-Fi Settings When the camcorder
  • Canon VIXIA HF R40 | Instruction Manual - Page 142
    the smartphone's connection settings 2 Touch [Smartphone Connection Settings]. The camcorder's SSID and password will appear. 3 If necessary, touch [Edit] > [OK] > [OK] to change the settings and then perform the procedure in Manual Setup (A 140). The next time you make a wireless connection, you
  • Canon VIXIA HF R40 | Instruction Manual - Page 143
    access point (WAP) is a device that allows wireless devices, like your camcorder, to connect to a wired network (including to the Internet) using the SSID Service Set Identifier. This is simply the public name of a Wi-Fi network. WPS Wi-Fi Protected Setup. Standard for easy and secure setup of
  • Canon VIXIA HF R40 | Instruction Manual - Page 144
    Additional Information This chapter contains troubleshooting advice, screen messages, handling and available functions are indicated by z and functions not available are indicated by -. On the camcorder's screen, menu items not available appear grayed out. For details about how to select an
  • Canon VIXIA HF R40 | Instruction Manual - Page 145
    focus): - - zz Toggle on or off, Touch AF frame [y Exposure] [n] (manual exposure): Toggle - - z z on or off, Touch AE frame [ä Mic. Level] [m] (automatic), [n] (manual) - - z z [Audio Level Indicator]: Toggle on or off [Ä White Balance] [Ã Automatic], [¼ Daylight], [É Tungsten], [Å Custom
  • Canon VIXIA HF R40 | Instruction Manual - Page 146
    Photos] Playback Pause A - 107 - 110 [This Scene] 56 z 99 z 100 Single Photo View A z 108 z 58 [ Other Settings] Menus p Camera Setup Menu item Setting options A [Self Timer] [i On
  • Canon VIXIA HF R40 | Instruction Manual - Page 147
    was the last time you used zoom. • When this function is set to [Full Wide Angle] and you manually adjust the focus, the focus will be lost and autofocus will be activated the next time you turn on the camcorder. [Focus Assistance]: When focus assistance is activated, the image at the center of
  • Canon VIXIA HF R40 | Instruction Manual - Page 148
    Balance] [y] [Û] (Original sound/Background music) z z 95 [j Off], [k Dissolve], [l Slide Image] - z 101 [C 2 sec], [D 4 sec], [F 8 sec] z z 74, 92 Display Setup Menu item [Onscreen Markers] [Display Date/Time] [Output Onscreen Displays] [LCD Brightness] [LCD Backlight] [LCD Mirror Image
  • Canon VIXIA HF R40 | Instruction Manual - Page 149
    • Using the bright setting will shorten the effective usage time of the battery pack. [LCD Mirror Image]: When set to [i On], this function the camcorder to a TV using the optional STV-250N Stereo Video Cable, select the setting according to the type of TV in order to display the picture in full and
  • Canon VIXIA HF R40 | Instruction Manual - Page 150
    is not available when the camcorder is connected to an HDTV using the supplied High Speed HDMI cable. q System Setup Menu item Setting options vy 6/4 [&] (built-in memory), [ ] (memory card) - zz - 6/4 - [External Hard Drive Info]* - zz - [AV/Headphones] [Ò AV], [Ó Headphones] z z
  • Canon VIXIA HF R40 | Instruction Manual - Page 151
    the [ Main Functions] panel z - - - (Default: [Ò Decoration]) [Battery Info] - zzz - [Displayed Units] [. Meters/Grams], [/ Feet/Pounds] [Yes] zzz - * Option available only after connecting an external hard drive to the camcorder. [Available Space in Memory]/[Used Space in Memory]: Displays
  • Canon VIXIA HF R40 | Instruction Manual - Page 152
    listed in the specifications. [External Hard Drive Info]: When the camcorder is connected to an external hard drive, this setting displays , the battery information may not be dis- played. [Displayed Units]: Selects the units to use for the focusing distance display during manual focus. This
  • Canon VIXIA HF R40 | Instruction Manual - Page 153
    Auto Power Off]: In order to save power when the camcorder is powered by a battery pack, it will automatically shut off if left without You can verify the current version of the camcorder's firmware, which is the software that controls the camcorder. This menu option is usually unavailable. [Reset All
  • Canon VIXIA HF R40 | Instruction Manual - Page 154
    * (A 43) 3 Zoom controls (A 48) 4 Total number of scenes / Total recording time 5 Memory operation (A 157) 6 Intelligent IS (A 45) 7 Remaining battery charge (A 157) * Available only in mode. 8 Control button [START]: Start recording a movie (A 41) 9 Face detection frame (A 76) A q Tracking
  • Canon VIXIA HF R40 | Instruction Manual - Page 155
    Recording Movies SCN and modes mode A a Control button [ ]: Open the (Home) menu (A 36) A s Shooting mode (A 39) dA Exposure (A 79) fA Focus (A 80) gA Face detection (A 76) A h White balance (A 83) jA Audio level indicator (A 87) A k While recording/during playback: Scene counter (hours : minutes
  • Canon VIXIA HF R40 | Instruction Manual - Page 156
    Playing Movies (during playback) sD Playback control buttons (A 52) D d Scene playback time D f Scene number D g Date/Time (A 148) D h Volume and background music balance controls (A 52, 96) D j Decoration (A 69) Viewing Photos kD Control button [Edit]: Open the Edit panel (A 146) lD Current
  • Canon VIXIA HF R40 | Instruction Manual - Page 157
    charge as a 100% 75% 50% 25% 0% percentage of the full charge of the battery pack. • When the battery charge becomes low, replace or charge the battery pack. Depending on the condition of the camcorder or battery, the actual battery charge may not match what is displayed on the screen. • When
  • Canon VIXIA HF R40 | Instruction Manual - Page 158
    " box before going on to the more detailed problems and solutions. Consult your dealer or a Canon Service Center if the problem persists. CHECK THIS FIRST Power supply • Is the battery charged? Is the compact power adapter correctly con- nected to the camcorder? (A 21) Recording • Did you turn the
  • Canon VIXIA HF R40 | Instruction Manual - Page 159
    - If you are using a battery pack recommended by Canon for use with this camcorder, there may be a problem with the camcorder or battery pack. Consult a Canon Service Center. A noise can be heard from the compact power adapter. - A faint sound can be heard while the compact power adapter is
  • Canon VIXIA HF R40 | Instruction Manual - Page 160
    only for a short while, it may indicate a problem with the camcorder. Consult a Canon Service Center. Playback Cannot delete a scene. - You You cannot divide scenes recorded or edited using another device. - The memory is full. Delete some recordings (A 56, 58) to free some space. Cannot copy scenes
  • Canon VIXIA HF R40 | Instruction Manual - Page 161
    pack. - Charging has stopped because the compact power adapter or the battery pack is faulty. Con- sult a Canon Service Center. Picture and Sound A rattling can be heard from the camcorder. - If it cannot be heard during camera mode, then the rattling is due to the movement of the internal
  • Canon VIXIA HF R40 | Instruction Manual - Page 162
    problem still persists, remove the battery pack and disconnect all other power sources from the camcorder. Then, reset all the camcorder the audio recording level manually (A 87). The use. Memory Card and Accessories Cannot insert the memory . - The memory card is full. Delete some recordings (A 56
  • Canon VIXIA HF R40 | Instruction Manual - Page 163
    External Devices Video noise appears on the TV screen. - When using the camcorder in a room where a TV is located, keep a distance between the compact power adapter and the power or antenna cables of the TV. Playback looks fine on the camcorder also to the instruction manual of your wireless router
  • Canon VIXIA HF R40 | Instruction Manual - Page 164
    detected by the camcorder during the Wi-Fi network setup. Perform the setup manually (A 140) external hard drive, List of Messages for Wi-Fi Functions (A 171) for a list of messages related to general Wi-Fi functions, and List of Messages for Web Services (A 173) for messages related to Web services
  • Canon VIXIA HF R40 | Instruction Manual - Page 165
    using this battery pack? - You attached a battery pack that is not recommended by Canon for use with this camcorder. - If you are using a battery pack recommended by Canon for use with this camcorder, there may be a problem with the camcorder or battery pack. Consult a Canon Service Center. Cannot
  • Canon VIXIA HF R40 | Instruction Manual - Page 166
    memory card with this camcorder (A 33). Cannot record - You cannot capture video snapshot scenes from scenes recorded or edited using another device. - There is a problem with the memory. If this message appears often without apparent reason, contact a Canon Service Center. 6/4 Cannot record Cannot
  • Canon VIXIA HF R40 | Instruction Manual - Page 167
    or copied to an SDXC memory card. Charge the battery pack - Battery pack is exhausted. Charge the battery pack. Check the memory card - Cannot access the off the camcorder and remove and reinsert the memory card. If turns back to green you can resume recording/playback. If the problem persists, save
  • Canon VIXIA HF R40 | Instruction Manual - Page 168
    camcorder - There is a problem with the file system that prevents accessing the selected memory. Initialize the memory with this camcorder using a video configuration that is not supported (PAL or SECAM). Play back the cover. Memory card is full - The memory card is full. Delete some recordings (A
  • Canon VIXIA HF R40 | Instruction Manual - Page 169
    . Scene recorded using another device. Cannot divide the scene. - Scenes that were not recorded with this camcorder cannot be divided with this camcorder. - Scenes that were edited using software cannot be copied or divided. Scene recorded using another device. Cannot play back the scene. - Scenes
  • Canon VIXIA HF R40 | Instruction Manual - Page 170
    Disconnect the USB cable, and restore the connection after a short while. Unable to recognize the data - The camcorder cannot play back scenes recorded using a video configuration that is not supported (PAL or SECAM). Play back the recordings with the device originally used to record them. Unable to
  • Canon VIXIA HF R40 | Instruction Manual - Page 171
    the camcorder. After a short while, turn it on again. If the problem persists contact a Canon Service Center. Unable to complete WPS. Try the operation again. - Some wireless routers require pressing and holding the Wi-Fi Protected Setup (WPS) button. For details, refer to the instruction manual of
  • Canon VIXIA HF R40 | Instruction Manual - Page 172
    screen. Wi-Fi cannot be used while the wireless microphone is attached - The camcorder's Wi-Fi functions cannot be used while the optional WM-V1 Wireless Microphone is connected to the camcorder. Disconnect the microphone from the MIC terminal and turn it off. Wi-Fi connection terminated
  • Canon VIXIA HF R40 | Instruction Manual - Page 173
    short while, turn them on again and perform the Wi-Fi network setup again. If the problem persists contact a Canon Service Center. List of Messages for Web Services Check network settings - The network settings in the camcorder are not correctly configured. Check the connection point, SSID and other
  • Canon VIXIA HF R40 | Instruction Manual - Page 174
    Try again - An error occurred when connecting to the CANON iMAGE GATEWAY server or the server is temporarily down. End the Wi-Fi connection and try again. 174 Š Additional Information
  • Canon VIXIA HF R40 | Instruction Manual - Page 175
    to an external device such as a computer or digital video recorder (A 107) and save them on a regular basis. This will protect your important recordings in case of damage and create more free space on the memory. Canon shall not be liable for any data loss. • Do not carry the camcorder by the LCD
  • Canon VIXIA HF R40 | Instruction Manual - Page 176
    camcorder. If the camcorder does not function properly, consult qualified service personnel. • Handle the camcorder with care. Do not subject the camcorder °F). Battery Pack DANGER! Treat the battery pack with care. • Keep it away from fire (or it might explode). • Do not expose the battery pack
  • Canon VIXIA HF R40 | Instruction Manual - Page 177
    battery pack and the camcorder. Wipe the terminals with a soft cloth. Long-term storage • Store battery packs in a dry place at temperatures no higher than 30 °C (86 °F). • To extend the battery life of the battery card defects or exposure to static electricity. Canon shall not be liable for lost or
  • Canon VIXIA HF R40 | Instruction Manual - Page 178
    to the LOCK position. LOCK switch Built-in Rechargeable Lithium Battery The camcorder has a built-in rechargeable lithium battery to keep the date/time and other settings. The built-in lithium battery is recharged while you use the camcorder; however, it will discharge completely if you do not use
  • Canon VIXIA HF R40 | Instruction Manual - Page 179
    cloth. • Condensation may form on the surface of the screen when the temper- ature changes suddenly. Wipe it with a soft dry cloth. Condensation Moving the camcorder rapidly between hot and cold temperatures may cause condensation (water droplets) to form on its internal surfaces. Stop using the
  • Canon VIXIA HF R40 | Instruction Manual - Page 180
    Abroad Power Sources You can use the compact power adapter to operate the camcorder and to charge battery packs in any country with power supply between 100 and 240 V AC, 50/60 Hz. Consult a Canon Service Center for information on plug adapters for overseas use. Playback on a TV Screen You can
  • Canon VIXIA HF R40 | Instruction Manual - Page 181
    to area) Card reader/writer Printer Computer External hard drive** TV/HDTV Digital video recorder Optional accessories not listed below are described in more detail Cable Cable * Supplied with the camcorder; not available as an optional accessory. ** 6/4 only. Additional Information Š 181
  • Canon VIXIA HF R40 | Instruction Manual - Page 182
    of non-genuine Canon accessories, although you may request such repairs on a chargeable basis. 2 Battery Packs When you need extra battery packs, select one of the following models: BP-718 or BP-727. When you use battery packs bearing the Intelligent System mark, the camcorder will communicate with
  • Canon VIXIA HF R40 | Instruction Manual - Page 183
    pack→ Charging conditions↓ BP-718 BP-727 Using the camcorder 335 min. 465 min. Using the CG-700 Battery Charger 220 min. 315 min. Recording and playback times given in the following tables are approximate and vary according to video quality and charging, recording or
  • Canon VIXIA HF R40 | Instruction Manual - Page 184
    min. 240 min. 6/4 Recording MP4 movies using the built-in memory Battery pack BP-718 BP-727 Video quality 35 Mbps 24 Mbps 17 Mbps 240 min. 240 min. 255 min. Recording MP4 movies using a memory card Battery pack Video quality Recording (maximum) Recording (typical)* Playback 35 Mbps 85 min
  • Canon VIXIA HF R40 | Instruction Manual - Page 185
    supplied with your external hard drive. qA SC-2000 Soft Carrying Case A handy camcorder bag with padded compartments and plenty of space for accessories. This mark identifies genuine Canon video accessories. When you use Canon video equipment, we recommend Canon-brand accessories or products bearing
  • Canon VIXIA HF R40 | Instruction Manual - Page 186
    Specifications VIXIA HF R42 / VIXIA HF R40 / VIXIA HF R400  - Values given are approximate figures. System • Recording System Movies: AVCHD* Video: MPEG-4 AVC/H.264; Audio: Dolby Digital 2ch MP4 Video: MPEG-4 AVC/H.264 Audio: MPEG-2 AAC-LC (2ch) Photos: DCF (Design rule for Camera File system),
  • Canon VIXIA HF R40 | Instruction Manual - Page 187
    zoom is on: 1920 x 1080 (wide angle) 1360 x 765 (full telephoto) • LCD Touch Screen: 3 in., wide, TFT color, 230,000 dots, touch operation • Microphone: Stereo electret condenser microphone • Lens f=2.8-89.6 mm, F/1.8-4.5, 32x optical zoom, 53x advanced zoom 35 mm equivalent: 38.5 - 1,232 mm 32
  • Canon VIXIA HF R40 | Instruction Manual - Page 188
    Connector; output only • MIC Terminal ∅ 3.5 mm stereo minijack -64 dBV (with 600 Ω microphone) / 5 kΩ or more Wi-Fi (6/4 only) • Standard: Complies with the IEEE 802.11b/g/n protocol; Wi-Fi Protected Setup (connection methods: WPS button, PIN code) • Frequency: 2.4 GHz • Supported channels: 1 - 11
  • Canon VIXIA HF R40 | Instruction Manual - Page 189
    BP-718 Battery Pack • Battery type Rechargeable lithium ion battery • Rated voltage: 3.6 V DC • Operating temperature: 0 - 40 °C (32 - 104 °F) • Battery capacity: 1,840 mAh (typical); 6.5 Wh / 1,790 mAh (minimum) • Dimensions: 30.3 x 24.9 x 40.1 mm (1.2 x 0.98 x 1.6 in.) • Weight: 42 g (1.5 oz)
  • Canon VIXIA HF R40 | Instruction Manual - Page 190
    files compatible with the camcorder are as follows. Audio CANON\PRIVATE\MY_PICT\MIX_01.JPG to MIX_99.JPG Sample image mix frames can be found in the "MY_PICT" folder of the supplied VIXIA CD-ROM. Weight and dimensions are approximate. Errors and omissions excepted. The information in this manual
  • Canon VIXIA HF R40 | Instruction Manual - Page 191
    Special Scene mode) . . . . . 67 Built-in backup battery 178 C CameraAccess 125 CANON iMAGE GATEWAY 121, 130 Capturing photos/video snapshot scenes from a movie 63 E Edit panel 146 Error messages 164 Exposure 79 External microphone 90 F Face detection 76 Facebook 121 Faders 78 File
  • Canon VIXIA HF R40 | Instruction Manual - Page 192
    Memory card 27, 177 Memory save 116 MIC terminal 91 Movie format (AVCHD/MP4 39 camcorder settings 162 S Saving recordings 107 Transferring to a computer 111 Using external screen operations 35 Trimming scenes 100 Tripod 176 Troubleshooting 158 Turning off notification sounds . . . 152
  • Canon VIXIA HF R40 | Instruction Manual - Page 193
    Wi-Fi functions 122 Y YouTube 121 Z Zoom 47 Advanced zoom 47 Zoom speed 47 * 6/4 only. Additional Information Š 193
  • Canon VIXIA HF R40 | Instruction Manual - Page 194
    follow operating instructions; B) If the Equipment is defective as a result of leaking batteries, sand, dirt or water damage; C) If defects or damages are caused by the use of unauthorized parts or by service other than by Canon USA's factory service centers or authorized service facilities; D) If
  • Canon VIXIA HF R40 | Instruction Manual - Page 195
    PROPERTY AND TO OTHERS AND THEIR PROPERTY ARISING OUT OF USE, MISUSE OR INABILITY TO USE THE EQUIPMENT NOT CAUSED DIRECTLY BY THE NEGLIGENCE OF CANON USA. (SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU).THIS
  • Canon VIXIA HF R40 | Instruction Manual - Page 196
    the instruction manual; ii) the use of accessories, attachments, products, supplies, parts or devices with the Equipment that do not conform to Canon specifications or that cause abnormally frequent service problems; iii) repairs or services performed by any party other than a Canon Service Facility
  • Canon VIXIA HF R40 | Instruction Manual - Page 197
    , Hunghom, Kowloon, Hong Kong Tel: +852 3191 2333, Fax: +852 2428 3963 For support concerning PIXELA's software, please call PIXELA customer support (see the back cover of the Startup Guide for PIXELA's software). © CANON INC. 2013 PUB. DIE-0431-000B 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
PUB. DIE-0431-000B
HD Camcorder
Instruction Manual
64