Canon VIXIA HF R400 Instruction Manual - Page 141
Viewing and Changing Wi-Fi Settings
View all Canon VIXIA HF R400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 141 highlights
In step 2, if you selected [OPEN NONE], this step is not necessary. 4 Touch [Automatic] or [Manual] to select how to obtain the IP address. If you selected [Automatic], proceed to step 11. 5 For both the IP address and subnet mask areas, touch [0.0.0.0] and then touch [Í]/[Î] to change the value. Touch and next field and change the value, as necessary. 6 Touch [OK] and then touch [Next]. 7 In the default gateway area, touch [0.0.0.0] and then touch [Í]/ [Î] to change the value. Touch and next field and change the value, as necessary. 8 Touch [OK] and then touch [Next]. 9 For both the primary and secondary DNS server areas, touch [0.0.0.0] and then touch [Í]/[Î] to change the value. Touch and next field and change the value, as necessary. 10 Touch [OK] and then touch [Next]. 11 Touch [OK]. • After the connection is established, continue using the function you were previously using. For details, refer to the procedure in Viewing and Changing Wi-Fi Settings (A 142) or Sharing Your Recordings Using Web Services (A 133), as necessary. NOTES • The Wi-Fi functions available and the setup method will vary depending on the specifications and characteristics of the Wi-Fi network you want to use. Viewing and Changing Wi-Fi Settings When the camcorder is connected to an access point or to a Wi-Fienabled device, you can view the Wi-Fi connection settings and even change them, if necessary. Operating modes: SCN Wi-Fi Functions 141