Canon VIXIA HF S30 VIXIA HF S30 Instruction Manual
Canon VIXIA HF S30 Manual
 |
View all Canon VIXIA HF S30 manuals
Add to My Manuals
Save this manual to your list of manuals |
Canon VIXIA HF S30 manual content summary:
- Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 1
PUB. DIM-1006-000 HD Camcorder Instruction Manual English Caméscope HD Manuel d'instruction Français Videocámara HD Manual de Instrucciones Español - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 2
AND TO REDUCE ANNOYING INTERFERENCE, USE THE RECOMMENDED ACCESSORIES ONLY. COPYRIGHT WARNING: Unauthorized recording of copyrighted materials may infringe on the rights of copyright owners and be contrary to copyright laws. HD Camcorder, VIXIA HF S30 A systems This device complies with Part 15 of - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 3
wrong type of batteries are attached. Use only the same type of batteries. • Do not expose batteries or product to NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead servicing) instructions in the literature accompanying the product. 3 - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 4
Canon HD Camcorder VIXIA HF S30 A and all its accessories. 1 Read these instructions. 2 Keep these instructions. 3 Heed all warnings. 4 Follow all instructions all servicing to qualified service personnel. Servicing is manual. 18 Accessories - Do not use accessories not recommended in this manual - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 5
other power sources such as battery power, refer to instructions in this manual. 23 Polarization - The CA mast and ELECTRIC GROUNDING CONDUCTORS supporting structure, grounding of the lead kind onto the product. 29 Servicing - Do not attempt to service this product yourself as opening or removing - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 6
power sources including battery, and refer servicing to qualified service personnel under the instructions. Adjust only those controls that are covered by the operation instructions. Canon Service Center for further information. This Class B digital apparatus complies with Canadian ICES-003. 6 - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 7
United States and/or other countries. • Macintosh and Mac OS are trademarks of Apple Inc., registered in the U.S. and other countries. • "x.v.Color" and the "x.v.Color" logo are trademarks. • HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 8
the built-in memory or on commercially available memory cards (0 37). Relay Recording 34 57 The memory almost full? Use the double memory card slot to keep on recording video without interruption (0 41). 1 "Full HD 1080" refers to Canon camcorders compliant with high-definition video composed of - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 9
you want to shoot. You get spectacular recordings every time without worrying about settings. Video Snapshot (0 71) Just point the camcorder and it will automatically select the best settings for your subject Shoot or capture short scenes and arrange them into a video clip set to your favorite - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 10
-compatible HDTVs and digital recorders with a card slot compatible with the type of memory card used4. Play video directly from your recorded memory card Eye-Fi Save or upload to the Web. High Definition Standard Definition AVCHD MPEG-2 SD-Video Convert your HD movies, in the camcorder - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 11
11 - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 12
Setting the Date and Time 36 Changing the Language 36 Changing the Time Zone 37 Using a Memory Card 37 Memory Cards Compatible for Use with the Camcorder 39 Inserting and Removing a Memory Card 40 Selecting the Memory for the Recordings 41 Relay Recording of Movies 42 Initializing the - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 13
70 Touch & Track 71 Video Snapshot 72 Digital Effects 73 Manually Setting the Shutter Speed or Aperture 76 Manual Exposure Adjustment 78 Automatic Gain Control (AGC) Limit 78 Manual Focus Adjustment 81 White Balance 82 Digital Tele-Converter 83 Image Effects 84 Mini Video - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 14
Headphones 88 Using the Mini Advanced Shoe 89 Using an External Microphone 91 Using the Custom Key and Dial 92 Using a Photos 110 Additional Functions 110 Taking Photos in y Manual Mode 111 Selecting Photo Size and Quality 113 Flash 115 Drive Mode: Continuous Shooting and Exposure Bracketing - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 15
on the Camcorder 128 Connection Diagrams 130 Playback on a TV Screen 132 Saving and Sharing Your Recordings 132 Copying Recordings to a Memory Card 134 Saving Recordings on a Computer 138 Saving Movies onto Standard-Definition Discs (DVD) 141 Copying Recordings to an External Video Recorder - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 16
Thank you for purchasing the Canon VIXIA HF S30. Please read this manual carefully before you use the camcorder and retain it for future reference. Should your camcorder fail to operate correctly, refer to Troubleshooting (0 170). Conventions Used in this Manual • IMPORTANT: Precautions related to - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 17
. - Pressing g (when recording movies) or j fully (when recording photos). - Turning off the camcorder. The names of physical buttons and switches on the camcorder are indicated within a "button" frame. For example w. The 8 arrow is used to abbreviate menu selections. For a detailed explanation on - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 18
(incl. power cord) BP-808 Battery PackW XWL-D89 Wireless Controller (incl. CR2025 lithium button battery) STV-250N Stereo Video CableW Yellow • Red • White plugs XCTC-100/S Component Cable Red • Green • Blue plugs IFC-300PCU/S USB CableW XInstallation Guide for PIXELA's software 18 Š Introduction - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 19
. - Music data - Music files that can be used as background music during playback. These music files are for exclusive use with the supplied PIXELA's software. The disc cannot be played back on CD players. * The CD-ROM includes the instruction manual of the software (on PDF file). Introduction Š 19 - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 20
slot X (0 39) A d Memory card slot Y (0 39) A f Mode switch (0 31) A g Stereo microphone (R) (0 85) A h Strap mount (0 26) A j USB terminal (0 127, 130) A k HDMI OUT terminal (0 127, 128) A l Grip belt (0 26) S q MIC terminal (0 90) S a Mini video light (0 84) S s Flash (0 113) S d Instant AF sensor - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 21
PHOTO button (0 44, 110) S k ACCESS indicator (0 44, 61, 110) S l Pop-up flash (0 113) and mini video light (0 84) D q POWER button D a ON/OFF (CHG) ( number label is located inside the battery attachment unit. Remove the battery pack to find it. D l Battery attachment unit (0 23) Introduction Š 21 - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 22
Bottom view F q Tripod socket (0 188) F a BATTERY RELEASE switch (0 24) F s Dioptric adjustment lever (0 29) Wireless Controller WL-D89 1 START/STOP button (0 44, 61) 2 b (index selection) button (0 55) Press and hold for more - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 23
. 2 Plug the power cord into a power outlet. 3 Connect the compact power adapter to the camcorder's DC IN terminal. 4 Attach the battery pack to the camcorder. Press the battery pack softly into the battery attachment unit and slide it up until it clicks in place. DC IN terminal Preparations Š 23 - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 24
out when you turn off the camcorder. After a moment, the ON/OFF (CHG) indicator will start flashing in red (battery pack charging). The red ON/ OFF (CHG) indicator will go out when the battery pack is fully charged. • If the indicator flashes quickly, refer to Troubleshooting (0 170). To remove the - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 25
than you think you might need. • USA and Canada only: The Lithium ion/polymer battery that powers the product is recyclable. Please call 1-800-8-BATTERY for information on how to recycle this battery. Preparing the Accessories Wireless Controller First, insert the supplied CR2025 lithium button - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 26
's remote sensor when you press the buttons. You can rotate the LCD panel 180 degrees to use the wireless controller from the front of the camcorder. NOTES • The wireless controller may not work properly when the remote sensor is situated under strong light sources or direct sunlight. Grip Belt and - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 27
90 degrees downward. • You can rotate the panel 180 degrees toward the lens. Rotating the LCD panel 180 degrees can be useful in the following cases: in the picture when recording with the self timer. - To allow the camcorder to be operated with the wireless controller from the front. 180° 180° - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 28
the LCD and viewfinder screens: The screens are produced using extremely high-precision manufacturing techniques, with more than 99.99% of the pixels operating to specification. Less than 0.01% of the pixels may occasionally misfire or appear as black, red, blue or green dots. This has no effect on - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 29
Using the Viewfinder If it is difficult to use the LCD screen even after turning on the LCD backlight, you can use the viewfinder. You can also use the viewfinder when you rotate the LCD panel 180 ° to let the subject watch the recording. To use the viefinder, hold out both sides of the viewfinder - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 30
a subject that appears on the touch screen to select it and have the camcorder choose the optimal settings. Drag Swipe your finger up and down or left and controls (for example, to adjust the volume). IMPORTANT • The camcorder uses a pressure-sensitive touch screen. Press firmly when using touch - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 31
). Flexible recording Use one of the dedicated recording modes to enjoy full access to the menus and advanced functions and change the camcorder's settings to your preference. Touch [4] to record movies (0 61). Touch [3] to record photos (0 110). * The mode icon displayed will change according to - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 32
into depends on the initial recording mode. You can press S when the camcorder is off to turn it on directly in playback mode. Initial mode Press screen) (0 106). NOTES • When switching to a playback mode, the memory selected for playback will be the same currently used for recording. • You - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 33
Using the Menus Many of the camcorder's functions can be adjusted from the FUNC. panel and the setup and down along the scroll bar to display the rest of the panel In and mode, touch [Edit] to display a similar panel contain- ing the various operations that are available after selecting one or - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 34
into the orange selection bar. Menu items not available appear grayed out. 5 When the desired menu item is in the orange bar, touch inside the frame on the right. 6 Touch the desired option and touch [a]. You can touch [a] to close the menu at any time. NOTES • A small font size is used - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 35
-hour clock (AM/PM). 6 Touch [OK] to start the clock and close the setup screen. NOTES • When you do not use the camcorder for about 3 months, the built-in rechargeable lithium battery may discharge completely and the date and time setting may be lost. In such case, recharge the built-in lithium - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 36
Changing the Language The default language of the camcorder is English. You can set it to one of 22 other languages. Operating modes: [FUNC.]* 8 [MENU] 8 6 8 [Language a] 8 Desired language 8 [OK] 8 [a] * Only when performing the procedure - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 37
Using a Memory Card Memory Cards Compatible for Use with the Camcorder You can use commercially available Secure Digital (SD) cards with this camcorder. However, depending on the memory card, you may not be able to record movies. Refer to the table below. As of October 2010, the movie recording - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 38
SDXC Memory Cards You can use SDXC memory cards with this camcorder. When using memory cards with other devices, such as digital recorders, computers and card readers, make sure that the external device is compatible with SDXC cards. The table below summarizes compatibility by computer operating - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 39
2 Open the double memory card slot cover. 3 Insert the memory card into one of the memory card slots. • You can also use two memory cards, one in each memory card slot. • Insert the memory card straight, with the label facing the front of the camcorder, all the way into the memory card slot until it - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 40
available recording time/number of photos, based on currently used settings. NOTES • Select to record movies in the built-in memory or memory card X if you later want to convert the movies to standard definition in order to upload them to the Web or to create standard DVDs. 40 Š Preparations - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 41
recording from the built-in memory to memory card Y. When using a single memory card, be sure to insert it into memory card slot X. • Any of the following actions will deactivate the relay recording function: - Turning off the camcorder. - Opening the double memory card slot cover. - Changing the - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 42
Initializing the Memory Initialize memory cards when you use them with this camcorder for the first time. You can also initialize a memory card or the built-in memory to permanently delete all the recordings it contains. At the time of purchase, the built-in memory comes pre-initialized and contains - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 43
To transfer music files from the supplied Camcorder Supplemental Disc to the memory card after it is initialized: - Windows users: Use the supplied PIXELA's software. For details, refer to the Software Guide (PDF file) of the supplied PIXELA's software. - Mac OS users: Use Finder to transfer music - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 44
using an Eye-Fi card. To record video Press g to begin recording. Press g again to pause the recording. To take photos 1 Press j halfway. Once the focus is automatically adjusted, h will turn green and one or more AF frames will appear. 2 Press j fully. The ACCESS indicator will flash as the photo - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 45
& Track (0 70) to track other moving subjects, keeping them in focus and using the best settings to record them. About the Smart AUTO mode When shooting in mode, the camcorder will automatically detect certain characteristics of the subject, background, lighting conditions, etc. It will then - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 46
the ACCESS indicator is on or flashing. Failing to do so may result in permanent data loss or damage to the memory. - Do not open the double memory card slot cover. - Do not disconnect the power source or turn off the camcorder. - Do not change the camcorder's operating mode. 46 Š Dual Shot Mode - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 47
recordings. Canon shall not be liable for any loss or corruption of data. • When recording photos on an Eye-Fi card in memory card slot Y, h turns yellow. Set the camcorder to mode and adjust the focus manually (0 78). - When the subject is too bright, [Overexp.] will flash on the screen. In such - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 48
zoom in and out: using the zoom lever on the camcorder, using the zoom buttons on the wireless controller or using the to the 10x optical zoom, in mode, you can turn on the 200x digital zoom with the 7 8 [Digital Zoom] setting. Using the Zoom Lever or Wireless Controller Move the zoom lever - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 49
Quick Start Function When you close the LCD panel with the camcorder on, the camcorder enters the standby mode. In standby mode the camcorder consumes only about 1/3 the power used when recording, saving energy when you are using a battery pack. Additionally, when you open the LCD panel or pull out - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 50
closed while the ACCESS indicator is on or flashing, while a menu is being displayed, or while the viewfinder is pulled out. The camcorder may also not enter standby mode if the LCD panel is closed while the double memory card slot cover is open or when the battery charge is too low. Check that the - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 51
Video This chapter covers functions related to movies, including playback, advanced shooting, advanced functions and playlist and scene operations. For details about basic video shooting, refer to Dual Shot Mode (0 44). Basic Playback Playing Back the Video Operating modes: 1 Press S. You can also - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 52
scene you want to play back. Move the zoom lever toward Q to show 15 scenes per page; move it toward P to show 6 scenes per page. A Memory being read. B Index screen currently displayed. C Drag your finger left for the next index page*. D Drag your finger right for the previous index page*. E Select - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 53
4 Touch the desired scene to play it back. • Playback will start from the scene selected and continue until the end of the last scene in the index screen. • Touch the screen during playback to display the playback controls. A Stop the playback. B Jump to the beginning of the scene. Double-tap to - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 54
flashing. Failing to do so may result in permanent data loss. - Do not open the double memory card slot cover. - Do not disconnect the power source or turn off the camcorder. - Do not change the camcorder approximate. • Slow reverse playback will look the same as continuous frame reverse. 54 Š Video - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 55
scenes, playlist, or photos, for example). You can also select the memory from which you want to play back your recordings. Operating modes: In index screen. A Touch the tab of the desired memory: built-in memory, memory card X or memory card Y. B Touch a control button to select the content you want - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 56
liking. [3D Flip View] See the following section (0 57). [Photos] Display the photo index screen. [SD Scenes] (only when a memory card is selected) Scenes that were converted to standard definition to upload them to the Web (0 142) or to create standard DVD discs (0 138). Touch [SD Scenes] and then - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 57
3D Flip View 3D Flip View is a fun way to display your video recordings (original scenes) in a 3D layout, organized by recording date. In any index screen, touch [b] 8 [3D Flip View]. During single photo view, touch the screen once to display the controls then touch [Q] to open the [Photos] index - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 58
Narrowing Down the Scenes Shown in the Index Screen From the [Original] index screen, you can narrow down the scenes shown, leaving only scenes that were recorded on a specific date or only those scenes in which people's faces were detected. Operating modes: Showing Only Scenes that Contain People's - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 59
scenes (that is, movies were recorded on that date) appear in black against a silver background. Dates without recordings appear grayed out. • Touch in keeping. Deleting scenes allows you also to free up space on the memory. See also Deleting Scenes from the Playlist (0 101). Operating modes: 1 - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 60
from scenes you may have selected individually.) 4 Delete the scenes. [Edit] 8 [Delete] 8 [Yes]* 8 [OK] * Touch [ flashing (while scenes are being deleted). - Do not open the double memory card slot cover. - Do not disconnect the power source or turn off the camcorder. - Do not change the camcorder - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 61
while the ACCESS indicator is on or flashing. Failing to do so may result in permanent data loss or damage to the memory. - Do not open the double memory card slot cover. - Do not disconnect the power source or turn off the camcorder. - Do not change the camcorder's operating mode. • Be sure to save - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 62
the memory. Select MXP or FXP mode for better movie quality; select LP mode for longer recording times. The following table gives approximate recording times. Operating modes: [FUNC.] 8 [MENU] 8 8 8 [Recording Mode] 8 Desired recording mode 8 [a] NOTES • The camcorder uses a variable bit rate (VBR - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 63
Memory ↓ 4 GB Memory card 20 min. 30 min. 40 min. 1 hr. 10 min. 1 hr. 30 min. 8 GB Memory card 40 min. 1 hr. 1 hr. 2 hr. 3 hr. 25 min. 20 min. 16 GB Memory card program 8 [a] Options ( Default value) [FPortrait] The camcorder uses a large aperture, to achieve a sharp focus on the - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 64
[GSports] To record sports scenes such as tennis or golf. [q Night Scene] To record nightscapes with lower noise. [ISnow] To record in bright ski resorts without the subject being underexposed. [JBeach] To record on a sunny beach without the subject being underexposed. [KSunset] To record sunsets in - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 65
to occur. Stabilize the camcorder, for example, by mounting it on a tripod. Cinema Mode: Giving a Cinematic Look to your Recordings Give your recordings a cinematic look by using the [D Cine Mode] recording program. Combine this recording program with the 24 fps progressive frame rate [E PF24] or - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 66
your movies to video sharing Web sites, set the frame rate to [E PF24] or convert the movies to standard definition using the supplied software VideoBrowser. Advanced Image Stabilization The image stabilizer reduces camcorder blur (blur due to the camcorder moving) so you can get nice, stable shots - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 67
the operation of the Y button (long press or toggle on/off) with the 7 8 [POWERED IS Button] setting. NOTES • If the degree of camcorder shake is too high, the image stabilizer may not be able to fully compensate. • Powered IS is not available in mode. • For surveying and following shots, when - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 68
camcorder memory will start 3 seconds before g was pressed. NOTES • While pre-recording is activated, the camcorder will not emit any notifi- cation sounds. • The camcorder Leaving the camcorder without any operation for the camcorder's operating mode. - Setting the camcorder to standby - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 69
will optimize the settings for that person. Other faces will have gray frames. Touch a different face on the touch screen to optimize the camcorder's settings for that person. Main subject NOTES • The camcorder may mistakenly detect the faces of non-human subjects. In such case, turn face detection - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 70
than 1/30 (1/24 if the frame rate is set to [E PF24] or [z 24F]) or when the digital zoom is activated at more than 40x zoom (dark blue area on the zoom bar). • When face detection is activated, the slowest shutter speed used by the camcorder is 1/30 (1/24 if the frame rate is set to [E PF24 - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 71
4 seconds (the blue frame serves as a visual progress bar) and then automatically returns to record pause mode. You can change the length of video snapshot scenes with the 8 8 [Video Snapshot Length] setting. • When the camcorder stops recording, the screen will momentarily turn black as if a camera - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 72
pause the recording. Options ( Default value) [N Off] Select this setting when you do not intend to use the digital effects. [2 Black & White]* Records movies and photos in black and white. [3 Sepia]* Records movies and photos in sepia tones for an "old" look. [0 Fade Trigger/Once], [6 Fade - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 73
Manually Setting the Shutter Speed or Aperture [A Programmed AE] is the default shutter speed (B) or aperture value (C) 8 [a] Options ( Default value) [A Programmed AE] The camcorder automatically adjusts the aperture and shutter speed to obtain the optimal exposure for the subject. [B Shutter-Pri - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 74
250] indicates a shutter speed of 1/250 second, etc. - In mode, when the frame rate is set to [E PF24] or [z 24F], the shutter speeds available will be the following value (aperture or shutter speed), the number displayed will flash if the aperture value or shutter speed is not appropri- - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 75
image is clearly in focus. Good for landscapes and architectural shots.W mode A y mode F2.0 F2.8 F4.0 F5.6 F8.0 F1.8 F2.4 F3.4 F4.8 F6.7 More light y Lens aperture A Less light Shallow y Depth of Field A Deep Video Š 75 - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 76
Touch a subject that appears inside the e frame. • The Touch AE mark (P) will flash and the exposure will be adjusted automatically manually without activating the Touch AE function. • The manual adjustment dial appears and the adjustment value is set at ±0. • Touch [y] again to return the camcorder - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 77
end up appearing as bright areas where all detail is lost. Using the [Highlights] setting, you can touch the brightest area inside the e frame and the camcorder will automatically make corrections so that area is not overexposed. When you touch a dark area in the picture or the highlights are too - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 78
Gain Control (AGC) Limit When recording in dark surroundings, the camcorder will automatically increase the gain to try to get a brighter but will have less the noise. Operating modes: [FUNC.] 8 [P AGC Limit] 8 [y Manual]* 8 Drag your finger left and right along the dial to set the AGC limit 8 [a] - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 79
Open the manual focus screen. [FUNC.] 8 [X Focus] 2 Touch a subject that appears inside the X frame. • The Touch AF mark (P) will flash and the camcorder to autofocus. 3 Touch and hold [l] or [W] to adjust the focus. • You can use the peaking function (0 80) to help you adjust the focus manually - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 80
Using the Peaking Function Peaking can help you achieve correct focus when focusing manually. While peaking is activated, the outlines of subjects that are properly in focus are emphasized and shown in color. You can use the black and white setting to create an even stronger contrast, making it even - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 81
procedure before touching [a]. To set the custom white balance Point the camcorder at a white object, so it fills the whole screen, and touch [Set WB]. When the adjustment is completed, g stops flashing and disappears. The camcorder will retain the custom white balance even if you turn it off - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 82
] or [g Custom WB]. Digital Tele-Converter Using the digital tele-converter, you can digitally increase the focal length of the camcorder by a factor of approx. 1.7 and record the enlarged image at full HD resolution. Operating modes: [FUNC.] 8 [ZOOM] 8 [b]* (digital tele-converter) 8 [a] * Touch - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 83
] Records subjects with softened outlines. [Y Soft Skin Detail] Softens the details in the skin tone area for a more complimentary appearance. To obtain the best effect, use this setting when recording a person in close-up. Note that areas similar to the skin color may lack in detail. [Z Custom - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 84
on the screen. Using an External Video Light You can use the optional VL-5 Video Light or VFL-2 Video Flash Light when you need a video For details about using the optional video light, refer to the instruction manual of the accessory used. NOTES • When an optional video light is attached to - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 85
j fully (when recording photos). - Turning off the camcorder. - Changing the camcorder's operating mode. - Setting the camcorder to standby mode. Audio Recording Level You can adjust the audio recording level of the built-in or an external microphone. You can display the audio level indicator while - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 86
The audio level indicator and current audio recording level will appear on the screen. • Touch [z Automatic] to return the camcorder to automatic audio recording levels. Manual audio level adjustment Audio level indicator Current audio level Audio level adjustment bar 2 Touch and hold [y] or [A] to - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 87
distorted. • If the audio level is too high and the sound gets distorted, activate the microphone attenuator with the 7 8 [Microphone Attenuator] setting (or [Surround Mic Attenuator] when the optional SM-V1 Surround Microphone is attached to the camcorder). • We recommend using headphones to check - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 88
the camcorder a range of optional accessories to expand its functionality. For details about optional accessories available for use with your camcorder, refer to Accessories (0 194). For details about how to attach and use the accessories, refer also to the instruction manual of the accessory used - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 89
optional DM-100 Directional Stereo Microphone. NOTES • Accessories designed for the Advanced Accessory Shoe cannot be used with this camcorder. Look for video accessories bearing this logo to ensure compatibility with the mini advanced shoe. Using an External Microphone When recording in very quiet - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 90
(0 88). appears. For details about using the optional external microphone, refer to the instruction manual of the accessory used. Using other microphones You can also use commercially available microphones. Connect the external microphone to the MIC terminal. Use commercially available condenser - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 91
Using the Custom Key and Dial You can assign to the f button and dial one of five frequently used functions. You can then adjust the selected function using the f button and dial, without having to access any menus. To select the function of the custom key using the menu Operating modes: [FUNC.] 8 [ - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 92
Adjust the audio recording level (0 85). Press f to turn the manual adjustment of the recording level on/off and turn the dial to adjust camcorder to use certain functions while viewing the picture on an external monitor without touching the camcorder. This is particularly useful while the camcorder - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 93
to the REMOTE terminal on the camcorder. For details about using the zoom remote controller, refer to the instruction manual of the ZR-2000 or ZR- and displaying onscreen displays on an external monitor. Using the ZR-2000 only: switching between autofocus and manual focus, Push AF*, focus assistance - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 94
that point. A Touch twice to return to the index screen. B Previous/next scene. C Drag your finger left along the ruler to display the next 5 frames. D Current scene / Total number of scenes. E Scene's recording mode and length. F Recording date and time. G Drag your finger right along the ruler to - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 95
ruler will show frames taken from the scene every time the main subject detected by the camcorder changed. NOTES • supplied music tracks or connect an external audio player to use your of the memory cards, you will need to transfer the music tracks to the corresponding memory card in advance. - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 96
Use your favorite songs as background music by connecting an external player. POINTS TO CHECK • You will need a commercially available audio cable with at least one mini-stereo plug (to connect to the MIC terminal on the camcorder); the other end will depend on external player used). 96 Š Video - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 97
the [Playlist], [Video Snapshot] → [Original]/[Playlist] or [Photos] index screen. 2 Activate the external audio input. [MENU] 8 y / z 8 [External Audio Input] 8 [A On ] 3 Connect the external player to the camcorder's MIC terminal. 4 Adjust the audio input as necessary. • Start the music playback - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 98
To transfer music files from the supplied Camcorder Supplemental Disc to the memory card after it is initialized: - Windows users: Use the supplied PIXELA's software. For details, refer to the Software Guide (PDF file) of the supplied PIXELA's software. - Mac OS users: Use Finder to transfer music - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 99
appear automatically but will not remove onscreen displays that were turned on manually (for example, onscreen markers or the audio level meter). **Touch the . About the Data Code With every scene or photo recorded, the camcorder keeps a data code (date/time of recording, information about the - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 100
added to the playlist on the same memory they are recorded on. NOTES • Deleting or moving scenes in the playlist will not affect the original recordings. • Scenes that were edited using the supplied software VideoBrowser and were then transferred back to the camcorder cannot be added to the playlist - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 101
memory or from memory card X to memory card Y (0 132) to include in that memory card's playlist also scenes that were originally recorded in other memories not necessary to delete the entire playlist. 3 Delete the scenes from the playlist. [Edit] 8 [Delete] 8 [Yes]* 8 [OK] * If you selected to delete - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 102
the video snapshot scene. 2 Play back the desired scene. 3 Press g to capture the video snapshot scene. The camcorder captures the video snapshot scene for about 4 seconds (the blue frame serves as a visual progress bar), and then enters playback pause mode. You can change the length of video - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 103
memory that contains the source scene. • Video snapshot scenes cannot be captured from any of the following types of scenes. - Scenes shorter than 1 second - Scenes that were edited using the supplied software VideoBrowser and were then transferred back to the camcorder Eye-Fi card. Operating modes - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 104
frames and each frame captured as a separate photo. 4 Touch [B] to return to the index screen. IMPORTANT • When capturing photos on an Eye-Fi card in memory card a frame rate of [E PF24] or [z 24F]). Dividing Scenes You can divide scenes (original scenes only) in order to leave out the best parts - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 105
the index screen. NOTES • When advancing/reversing frames while dividing the scenes, the interval between frames is about 0.5 seconds. • If the seconds). - Scenes that were edited using the supplied software VideoBrowser and were then transferred back to the memory. • Scenes cannot be divided - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 106
Photos Refer to this chapter for details on taking photos (advanced shooting functions), viewing photos and printing them. For details about basic photo shooting, refer to Dual Shot Mode (0 44). Basic Playback Viewing Photos Operating modes: 1 Press S. 2 Open the [Photos] index screen, if it is not - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 107
the next index page. D Drag your finger right for the previous index page. E Select a different index screen to read different content or from a different memory (0 55). 4 Touch the photo you wish to view. • The photo is displayed in single photo view. • Drag your finger left/right to browse through - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 108
flashing. Failing to do so may result in permanent data loss. - Do not open the double memory card slot cover. - Do not disconnect the power source or turn off the camcorder. - Do not change the camcorder to display the playback controls. 3 Delete the photo. [Edit] 8 [Delete] 8 [d Proceed] 8 [Yes] 4 - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 109
All] instead of touching individual photos. (Remove in advance any checkmarks from photos you may have selected individually.) 4 Delete the photos. [Edit] 8 [Delete] 8 [Yes]* 8 [OK] * Touch [Stop] to interrupt the operation while it is in progress. Some photos will be deleted nevertheless. IMPORTANT - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 110
on or flashing. Failing to do so may result in permanent data loss. - Do not open the double memory card slot cover. - Do not disconnect the power source or turn off the camcorder. - Do not change the camcorder's operating mode. • When recording photos on an Eye-Fi card in memory card slot Y, photos - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 111
autofocus, h turns yellow. Adjust the focus manually (0 78). • When the subject is too bright, [Overexp.] will flash on the screen. In such case, use just recorded while reviewing it within the time set for the 8 8 [Photo Review Time] option. Operating modes: While reviewing the photo immediately - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 112
can actually be recorded on the memory card. (The maximum number of remaining photos displayed on the screen is 9999.) NOTES • The actual number of photos that can be recorded will vary depending on the subject and shooting conditions. • The camcorder - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 113
in dark places. Operating modes: POINTS TO CHECK • Select a recording program other than [M Fireworks]. 1 Select the flash mode. [FUNC.] 8 [S Flash] 8 Desired option 8 [a] • The icon of the selected flash mode appears. 2 Press j, first halfway to activate the autofocus and then fully to record the - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 114
flash light (n ON). For details about using the video flash light, refer to the instruction manual of the VFL-2. NOTES • The flash will not fire in the following cases: - When the flash lamp may light up briefly in order to enable the camcorder to focus more accurately (AF-assist lamp). - You can - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 115
order to choose later the photo you like the best. Operating modes: POINTS TO CHECK • Select a Records a single photo. [D AE Bracketing] The camcorder records 3 photos using 3 different exposures (dark, : normal (approx. 3 photos/second) and high speed (approx. 5 photos/second). Continuous Shooting - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 116
photos taken in record pause mode will be determined by the photo size set in mode (0 111). IMPORTANT • When recording photos on an Eye-Fi card in memory card slot Y, photos will be uploaded automatically if you are within the range of a configured network. Always verify that Eye-Fi - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 117
memory selected for recording photos. • Photos cannot be recorded simultaneously while the digital zoom or a digital standard shooting conditions, including backlit scenes. The camcorder divides the picture into several areas and spot AE point frame. Use this setting to adjust the exposure to match the - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 118
audio 3 Touch the screen to display the playback controls, then touch [A] to start the slideshow. 4 Start the music playback on the external player. • Drag your finger left and right along the volume bar to adjust the volume. • Touch [C] to stop the slideshow. Hide the playback controls if - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 119
To cancel the magnification, move the zoom lever toward Q until the frame disappears. Rotating Photos You can rotate photos 90 degrees to change their to rotate. 2 Touch the screen to display the playback controls. 3 Rotate the photo. [Edit] 8 [Rotate] 8 [q] (90° left) or [r] (90° right) 4 Drag your - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 120
to verify the correct exposure of the photo. Operating modes: * Pixel Count * In mode the histogram will be dis- played while a photo is reviewed immedi- ately after having taken the photo. Touch the screen to display the playback controls. The histogram and Exif information Shadows panel - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 121
photos you may have selected individually.) 4 Protect the photos. [Edit] 8 [Protect] 8 [Protect]* 8 [OK] * Touch [Remove Protection] to remove the protection from the selected photos. IMPORTANT • Initializing the memory will permanently erase all recordings, including protected photos. Photos Š 121 - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 122
functions... The following functions and features of the camcorder can be used either for shooting video or for • Face detection (0 69) • Touch & Track (0 70) • Digital effects (0 72) • Manual exposure adjustment (0 76) • Manual focus adjustment (0 78) • White balance (0 81) • Image effects - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 123
camcorder can be connected to any PictBridge-compatible printer. You can mark in advance the photos you want to print and set the desired number of copies as a print order (0 125). Canon If V continues to flash (for more than 1 minute) or if D does not appear, the camcorder is not correctly connected - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 124
, an error message (for example, [No paper]) will appear on the camcorder's screen. Solve the problem referring to the error message list (0 184) and to the printer's instruction manual. • Canon's PictBridge-compatible printers: If printing does not resume auto- matically after you solved the - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 125
number of copies as a print order. Later, you can easily print out the print orders by inserting the memory card into the SD memory card slot of DPOF-compatible printers or self-serviced digital photo kiosks. You can set print orders for up to 998 photos. Operating modes: Marking Single Photos with - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 126
the [Photos] index screen. Check that you have selected the 4 or 7 tab (memory card X or Y). 2 Touch [a] to open the photo selection screen. 3 Touch on photos you may have selected individually.) 4 Mark the photos with print orders. [Edit] 8 [Print Orders] 8 Desired option 8 [OK] Options [One Copy - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 127
how to connect your camcorder to an external device such as a TV, VCR, or computer. Terminals on the Camcorder 1USB Terminal Access: Open the side terminal cover. 2HDMI OUT Terminal* Access: Open the side terminal cover. The HDMI OUT terminal offers a high-quality digital connection that combines - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 128
camcorder and the right side shows (for reference only) an example of terminals on a connected device. Connection A HDMI Type: Digital Quality: High definition Output only Connect to a high-definition on an external device, as this may damage the camcorder. - While the camcorder is connected - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 129
Connection B Component Video Type: Analog Quality: High Definition Output only Connect to a high-definition TV (HDTV) with component video input terminals. Change the following settings on the camcorder: - 6 8 [AV/Headphones] to [H AV] CTC-100/S Component Cable (supplied) Red Blue Green STV- - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 130
high-definition connections will ensure the best playback quality. Operating modes: 1 Turn off the camcorder and the TV. 2 Connect the camcorder terminal to which you connected the camcorder. Refer to the instruction manual of the connected TV. 4 Turn on the camcorder and set it to or mode. - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 131
required on the connected HDTV. Refer to the TV's instruction manual. • We recommend powering the camcorder using the compact power adapter. • Connection C: When you mode if it is compatible with the Video ID-1 system. Otherwise, change the aspect ratio of the TV manually. External Connections Š 131 - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 132
you want to copy. • Select the f tab to copy scenes from the built-in memory or the 4 tab to copy scenes from memory card X. • [Original] or [Video Snapshot] → [Original] index screen: To copy all the advance any checkmarks from scenes you may have selected individually.) 132 Š External Connections - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 133
or on memory card X. (f or 4 appears next to the photo number.) 2 Touch the screen to display the playback controls. 3 Copy the photo. [Edit] 8 [Copy (f97)] or [Copy (497)] 8 [i Proceed] 8 [Yes] 4 advance any checkmarks from photos you may have selected individually.) External Connections Š 133 - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 134
to the memory card: - If the double memory card slot is open. - If the LOCK switch on memory card Y is set to prevent writing. - If there is no memory card in memory card slot Y. • Scenes that were edited using the supplied software VideoBrowser and were then transferred back to the camcorder cannot - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 135
follow the instructions in the Software Guide (PDF file) to install the supplied PIXELA's software. Connecting the Camcorder to a Computer 1 Power the camcorder using the compact power adapter. If the camcorder is connected to the computer while it is powered only by the battery pack, previously - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 136
save photos to your computer, and easily organize and edit them. Installation Install the software before you connect the camcorder to the computer for the first time. See also the relevant sections in the 'Photo Application' Instruction Manual (r PDF file) in the [MANUALS_ENGLISH] folder on the - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 137
remove the memory cards. - Do not access, change or delete any of the camcorder's folders or files directly from the computer as this may result in permanent data loss. Always save your movies on the computer, and restore files to the camcorder, using only the supplied PIXELA's software. • Operation - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 138
' DVD drives. Installation Install the software before you connect the camcorder to the computer for the first time. Refer to the Installation Guide (supplied leaflet) and follow the instructions in the Software Guide (PDF file) to install the supplied PIXELA's software. 138 Š External Connections - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 139
Scenes into Standard Definition 1 Power the camcorder using the compact power adapter. 2 Make sure there is a memory card in slot any checkmarks from scenes you may have selected individually.) 6 Touch [Edit] 8 [Convert HD9SD (x DVD)] to open the HD9SD conversion [f] 8 [f] External Connections Š 139 - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 140
camcorder to the computer using the supplied USB cable. • Connection D. Refer to Connection Diagrams (0 130). • On the computer, VideoBrowser will start up automatically. Click in the menu panel to create DVD discs. For details about using the software, click to open the Software Guide (PDF - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 141
movies in high definition. If the external digital video recorder has an SD memory card slot, you can use the memory card to copy your movies without connecting the camcorder. Details will vary depending on the device used so be sure to refer to the instruction manual of the digital video recorder - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 142
Install the software before you connect the camcorder to the computer for the first time. Refer to the Installation Guide (supplied leaflet) and follow the instructions in the Software Guide (PDF file) to install the supplied PIXELA's software. Operating modes: 142 Š External Connections - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 143
Definition 1 Power the camcorder using the compact power adapter. 2 Make sure there is a memory card convert scenes from the built-in memory or the 4 tab to convert scenes from memory card X. • [Original] or a confirmation screen will appear. Connect the camcorder to the computer at this point (0 145 - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 144
will result in better video quality for the converted scenes, while a lower bit rate will result in smaller file sizes and faster uploads. [5] 8 [Bit Rate (Quality)] 8 Desired option 8 [f] 8 [f] To convert only part of so we recommend you convert scenes in the camcorder. 144 Š External Connections - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 145
, click to open the Software Guide (PDF file). IMPORTANT • While the camcorder is connected to the computer, do not open the double memory card slot cover and do not remove the memory cards. • Observe the following precautions while the ACCESS indicator is on or flashing. Failing to do so may - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 146
have installed the software supplied with your Eye-Fi card and completed all the required configuration setup in advance. Refer to the instruction manual of the Eye-Fi card. Please read the IMPORTANT section (0 146) before using an Eye-Fi card. 1 Insert your Eye-Fi card into memory card slot Y and - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 147
power of the battery pack faster than usual. We recommend powering the camcorder using the compact power adapter. - While files are being uploaded wirelessly, the camcorder's automatic power off function will be disabled. • While recording audio with an external microphone, the interference caused - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 148
Additional Information This chapter contains troubleshooting advice, screen messages, handling and maintenance tips, ] z z 81 [z Automatic], [y Manual] [Audio Level Indicator]: Toggle on (x) or off (w) z - 86 [U Automatic], [V Red-Eye Auto], [S Flash On], [W Flash Off] - z 113 148 Š Additional - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 149
Zoom controls, g control, z z 48, [b] (digital tele-converter): Toggle on (x) or 82 off (w) [z Automatic], [y Manual]: (0 dB - 24 dB) z - 78 [Q Off], [2 Black & White], [3 Sepia], z - 72 [0 Fade Trigger/Once], [6 Fade Trigger/Always], [1 Wipe/Once], [7 Wipe/Always] [N Off], [2 Black & White - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 150
Setup Menus [Edit] Panel - Mode 1: Original scenes s: Playlist scenes (including the playlist only of video snapshot scenes) Z: Original video snapshot scenes u: SD scenes on memory card Y Control Button Target Scenes/Function 1 sZu 0 [Copy (497)] or [Copy (f97)] [Selected Scenes] z - z - - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 151
[Edit] Panel - Mode Control Button [Copy (497)] or [Copy (f97)] [Delete] [Protect] [Print Orders] [Rotate] Index Screen [Selected Photos], [All Photos] - Single Photo View 0 z 133 z 108 z 120 z 125 z 119 Additional Information Š 151 - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 152
Menus 7 / 8 Camera Setup Menu item [Digital Zoom] [Zoom Speed] [AF Mode] [AF-Assist Lamp] [Focus Priority] [Focus Assistance] [Face Detection & Tracking] [Auto Backlight Correction] [Auto Slow Shutter] [Image Effects] [Wind Screen] [Microphone Attenuator] [Surround Mic Directionality]* [Surround - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 153
* Option available only when the optional SM-V1 Surround Microphone is attached to the camcorder after having updated the camcorder's firmware using the memory card supplied with the SM-V1. [Digital Zoom]: Determines the operation of the digital zoom. The color of the indicator indicates the zoom - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 154
after 4 seconds or when you start recording. [Auto Slow Shutter]: The camcorder automatically uses slow shutter speeds to obtain brighter recordings in places with insufficient lighting. • Minimum shutter speed used: 1/30; 1/12 when the frame rate is set to [E PF24] or [z 24F]; 1/15 when it is - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 155
sensitive to sound coming directly from the front of the camcorder/microphone. [Surround Mic Attenuator]: Helps prevent audio distortions due to high audio recording levels when the optional SM-V1 Surround Microphone is attached to the camcorder. When set to [A On V], V will appear on the screen - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 156
] [h High Quality 24 Mbps], [i High Quality 17 Mbps], [j High Quality 12 Mbps], [l Standard Play 7 Mbps], [k Long Play 5 Mbps] z - - - 62 [Frame Rate] [C 60i (Standard)], [E PF24], [o PF30], [z 24F] z- - - - [Rec Media for Photos] [P] (built-in memory), [4] (memory card X), [7] (memory card - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 157
be con- verted to standard definition in the camcorder. [z 24F]: 24 frames per second, progressive. Using this frame rate will achieve the same cinematic look as [E PF24], the difference being that video is recorded as true 24p. Use the supplied software VideoBrowser to convert movies recorded with - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 158
on an HDTV compatible with x.v.Color, connected to the camcorder using an HDMI cable. If recordings made with x.v.Color are played back on a non-compatible TV, colors may not be reproduced correctly. [Color Bars & Test Tone]: Use the color bars to calibrate the colors on an external TV or monitor - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 159
memory card. [b Continuous]: Photo numbers will continue from the number following that of the last photo recorded with the camcorder. • If the memory card ] When [A On] - list of music tracks [External Audio Input] [B Off], [A On ] When [A On] - [External Player Link]: Toggle on (x) or off (w) 120 - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 160
[TV Type]: When you connect the camcorder to a TV using the supplied STV- [Volume] Speaker: q h, r - - z z 53, 87 Headphone: c d, e z - zz [Notification Sounds] [N High Volume], [M Low Volume], [B Off] zzzz - [Wireless Remote Control] [A On], [B Off L] zzzz - 160 Š Additional Information - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 161
Off (w, 12-hour clock) [Calendar Start Day] [Saturday], [Sunday], [Monday] [Battery Info] [Control for HDMI]2 - [A On], [B Off] [HDMI Status] - [ when the camcorder is connected to an HDTV using an HDMI cable. 3 Option available only after having inserted an Eye-Fi card in memory card slot Y. - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 162
be operated with the wireless controller. [Power Saving Mode]: Controls the camcorder's automatic power off settings. [Auto Power Off]: In order to save power when the camcorder is powered by a battery pack, it will automatically shut off if left without any operation for 5 minutes. • Approximately - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 163
week in the calendar screen (0 58). [Battery Info]: Displays a screen where you can verify the battery charge (as a percentage) and the the TV's instruction manual. • Correct operation of the HDMI-CEC function cannot be guaranteed even when connecting the camcorder to compatible TV sets. - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 164
for the focusing distance display during manual focus. [Demo Mode]: The demonstration mode displays the camcorder's main features. It starts automatically when the camcorder is powered with the compact power adapter if you leave it turned on without a memory card for more than 5 minutes. • To cancel - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 165
mode) 1 Smart AUTO mode (0 45) 2 Onscreen zoom controls (0 48) 3 Operating mode (0 31) 4 In record pause mode: Total number of scenes 5 Memory operation (0 169) 6 Remaining battery time (0 169) 7 Zoom (0 48) 8 Recording mode (0 62) 9 Control button: Start/Stop video recording A q Face detection - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 166
Digital tele-converter (0 82) hS PF24 progressive frame rate (0 65, 169) jS Remaining recording time 4, 7 On memory card X or Y f In the built-in memory k Headphone output (0 87) D l Mini video light (0 84) F q Microphone directionality of the SM-V1 (0 89) F a Control button: Switch to photo - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 167
h Flash (0 113) F j Eye-Fi wireless communication (0 146) F k Number of available photos 4, 7 On memory card X or Y f In the built-in memory F l Photo quality/size (0 111) G q Control button: Switch to movie recording (0 61) G a AF frame (0 154) G s Focus and exposure lock (0 44, 110) G d Camcorder - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 168
time of recording Exif information panel H h Control button: Slideshow (0 118) H j Control button: Open the Edit panel (0 151) H k Control button: Switch to [Photos] index screen (0 106) H l Manual focus (0 78) J q File size J a Photo size (0 111) J s Shutter speed (0 73) J d Aperture value (0 73 - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 169
a cinematic look. You can combine this frame rate with the [D Cine Mode] recording program to enhance the effect. S j Remaining recording time When there is no more free space on the memory, [f End] (built-in memory) or [4 End] (memory card X) or [7 End] (memory card Y) will be displayed in red and - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 170
" box before going on to the more detailed problems and solutions. Consult your dealer or a Canon Service Center if the problem persists. CHECK THIS FIRST Power supply • Is the battery charged? Is the compact power adapter correctly con- nected to the camcorder? (0 23) Recording • Did you turn the - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 171
the end of its battery life. Buy a new battery pack. Recording Pressing g will not start recording. - You cannot record while the camcorder is writing previous recordings onto the memory (while the ACCESS indicator is on or flashing). Wait until the camcorder has finished. - The memory is full or - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 172
for a short while, it may indicate a problem with the camcorder. Consult a Canon Service Center. Playback Cannot add scenes to the playlist be able to delete scenes recorded or edited using another device. Deleting scenes takes longer than usual. - When the memory contains a large number of scenes, - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 173
card. Initialize the memory card if the display does not change back to normal. - The memory card is full. Replace the memory card or delete some recordings (0 59, 108) to free some space on the memory card. S flashes in red on the screen. - The camcorder has malfunctioned. Consult a Canon Service - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 174
switch. - An error occurred when trying to access control data on the Eye-Fi card. Turn the camcorder off then on again. If the icon appears often, there might be a problem with the Eye-Fi card. Contact the card manufacturer's customer care. Picture and Sound The screen appears too dark. - The LCD - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 175
sound with an external microphone, the interference memory card. - Initialize the memory card (0 42) when you use it with the camcorder for the first time. - The LOCK switch on the memory card is set to prevent accidental erasure. Change the position of the LOCK switch. - A compatible memory card - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 176
card into memory card slot X. Insert it into memory card slot Y. Connections with External Devices Video noise appears on the TV screen. - When using the camcorder The camcorder is camcorder off and then on again. The camcorder turn off the camcorder and the TV compatible with HDMI-CEC the range of functions available - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 177
printer. After a short while turn it on again and restore the connection. - Cannot connect to a PictBridge-compatible printer if the memory contains 2,500 photos or more. After connecting the camcorder to a printer, the message [Busy] continues to appear on the screen - Disconnect the USB cable and - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 178
recommended by Canon for use with this camcorder. - If you are using a battery pack recommended by Canon for use with this camcorder, there may be a problem with the camcorder or battery pack. Consult a Canon Service Center. Cannot convert - Cannot access the memory card. Check the memory card and - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 179
Initialize the memory card with this camcorder (0 42). Cannot record - You cannot capture video snapshot scenes from scenes recorded or edited using another device. - There is a problem with the memory. If this message appears often without apparent reason, contact a Canon Service Center. Additional - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 180
using the [Complete Initialization] option (0 42). If the problem persists, contact a Canon Service Center. Cannot record Check the memory card - There is a problem with the memory card. Save your recordings (0 134) and initialize the memory card using the [Complete Initialization] option (0 42). If - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 181
] to [Reset] and delete all the photos on the memory card (0 108) or initialize it (0 42). Initialize only using the camcorder - There is a problem with the file system that prevents accessing the selected memory. Initialize the memory with this camcorder (0 42). LCD Screen has been dimmed - Hold - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 182
turn on face detection (0 69) when shooting movies. No memory card - Insert a compatible memory card into the camcorder (0 39). No photos - There are no photos to space - Delete some recordings on the memory card (0 59, 108) or select the [3Mbps] bit rate for the conversion to SD. Number of - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 183
recorded with another device using 24p frame rate. When converting scenes to SD, leave out scenes recorded using another device. Some scenes could not be deleted - Movies that were protected/edited with other devices cannot be deleted with this camcorder. Some scenes were recorded using another - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 184
. This scene was recorded using another device and cannot be copied. - Scenes that were not recorded with this camcorder cannot be copied to memory card Y. To record video on this memory card, it is recommended to use only the XP+/SP/LP recording modes - Movies may not be recorded correctly on - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 185
repairs. (Canon PIXMA printers: the printer's green power lamp and orange error lamp flash alternately.) - Disconnect the USB cable and turn off the printer. Unplug the printer's power cord from the power outlet and contact the appropriate customer support center or service center. Additional - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 186
printer's error indicator flashes or an error message appears on the printer's operation panel, refer to the printer's instruction manual. • If you cannot solve the problem even after consulting this list and the printer's instruction manual, contact the closest Canon Service Center (refer to the - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 187
to an external device such as a computer or digital video recorder (0 132) and save them on a regular basis. This will protect your important recordings in case of damage and create more free space on the memory. Canon shall not be liable for any data loss. • Do not carry the camcorder by the LCD - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 188
not drop it or subject it to shocks. • Do not get it wet. • Dirty terminals may cause a poor contact between the battery pack and the camcorder. Wipe the terminals with a soft cloth. Long-term storage • Store battery packs in a dry place at temperatures no higher than 30 °C (86 °F). • To extend the - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 189
optional CG-800 Battery Charger. • We recommend using genuine Canon battery packs bearing the Intelligent System mark. • If you attach to the camcorder battery packs that are not genuine Canon battery packs, will appear and the remaining battery time will not be displayed. Memory Card • We recommend - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 190
• Secure Digital (SD) memory cards have a physical switch to prevent writing on the card so as to avoid the accidental erasure of the card's content. To write-protect the memory card set the switch to the LOCK position. LOCK switch Built-in Rechargeable Lithium Battery The camcorder has a built-in - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 191
battery included contains Perchlorate Material - special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate for details. Disposal When you delete movies or initialize the memory giving the camcorder or memory card to another person, initialize the built-in memory or memory card using - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 192
Body • Use a soft, dry cloth to clean the camcorder body. Never use chemically treated cloths or volatile solvents such as paint thinner. Lens, Viewfinder and Instant AF Sensor • If the lens surface or Instant AF sensor is dirty, autofocus may not work properly. • Remove any dust or dirt particles - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 193
to operate the camcorder and to charge battery packs in any country with power supply between 100 and 240 V AC, 50/60 Hz. Consult a Canon Service Center for information on plug adapters for overseas use. Playback on a TV Screen You can only play back your recordings on TVs compatible with the NTSC - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 194
/S Component Cable* 6 CA-570 Compact Power Adapter Sq STV-250N Stereo Video Cable Ag IFC-300PCU/S* USB Cable Sa ZR-1000 Zoom Remote Controller Ah Memory card Ss ZR-2000 Zoom Remote Controller * Supplied with the camcorder; not available as an optional accessory. 194 Š Additional Information - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 195
the external design of the camcorder. When you use battery packs bearing the Intelligent System mark, the camcorder will communicate with the battery and display the remaining usage time (accurate to 1 minute). You can only use and charge these battery packs with camcorders and chargers compatible - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 196
times given in the following table are approximate and vary according to charging conditions and initial charge of the battery pack. Battery pack→ Charging conditions↓ Using the camcorder Using the CG-800 Battery Charger BP-808 BP-809 150 min. 105 min. BP-819 260 min. 190 min. BP-827 385 min - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 197
Using the built-in memory Battery pack BP-808 BP-809 BP-819 BP-827 Recording mode MXP FXP XP+ SP LP MXP FXP XP+ SP LP MXP FXP XP+ SP - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 198
camcorder lens by a factor of 1.5. • The image stabilizer is not as effective when the Tele-converter is attached. • The minimum focusing distance at full telephoto with the TL-H58 is 2.3 m (7.5 ft.). • When the Tele-converter is attached, a shadow may appear in the pic- ture when you use the flash - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 199
MC protector filters help you to control difficult lighting conditions. qA SC-2000 Soft Carrying Case A handy camcorder bag with padded compartments and plenty of space for accessories. aA SM-V1 Surround Microphone Use 5.1ch surround sound to add a sense of presence to your movies. You can link the - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 200
the camcorder to an external device using an all-digital connection, allowing you to enjoy playback at the highest quality. This cable sends both video and audio signals. This mark identifies genuine Canon video accessories. When you use Canon video equipment, we recommend Canon-brand accessories or - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 201
-002) Optional Accessories BP-809 Battery Pack BP-819 Battery Pack BP-827 Battery Pack CG-800 Battery Charger TL-H58 Tele-converter WD-H58 Wide-converter Protect Filter 58 mm ND4-L Filter 58 mm ND8-L Filter 58 mm VL-5 Video Light VFL-2 Video Flash Light SM-V1 Surround Microphone DM-100 Directional - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 202
Print-compliant printer, the camcorder's image data at the time of shooting is used and optimized, yielding extremely high quality prints. ** Only photos recorded on a memory card. • Television System 1080/60i* or 1080/24p (only recordings made with the [24F] frame rate) * Recordings made with the - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 203
(L, M, S): 39.9 - 399 mm Photos (LW, MW): 43.5 - 435 mm • Lens Configuration: 11 elements in 9 groups (2 aspheric elements) • AF System Autofocus (TTL + external distance sensor when set to [Instant AF]) or Manual focus • Filter Diameter: 58 mm • Minimum Focusing Distance 1 m (3.3 ft.); 1 cm - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 204
(rated) 7.4 V DC (battery pack), 8.4 V DC (compact power adapter) • Power consumption 4.1 W (SP mode, AF on, built-in memory, LCD normal brightness) 4.0 W (SP mode, AF on, memory card, LCD normal brightness) 3.6 W (SP mode, AF on, built-in memory, viewfinder) 3.5 W (SP mode, AF on, memory card - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 205
music files compatible with the camcorder are as follows. Audio encoding: Linear PCM Audio sampling: 48 kHz, 16 bits, 2 channels Minimum length: 1 second File extension: WAV The music data is saved in the memory under the following folder structure. In the built-in memory: CANON MY_MUSIC MUSIC_01 - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 206
31 E Edit panel 33, 150 Error messages 178 External microphone 89 Eye-Fi card 146 F Face detection Playback 58 Recording 69 Fireworks (recording program) . . . . 64 Flash 113 Flexible recording 31 Focus assistance 154 Focus priority 154 Frame rate 65, 157 FUNC. panel 33, 148 H HD to SD - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 207
, 30 Light metering mode 117 Low light (recording program) . . . . 64 M Magnifying photos 119 Maintenance 192 Manual exposure 76 Manual focus 78 Markers 155 Memory card 37, 189 MIC terminal 90 Microphone attenuator . . . . 154, 155 Mini advanced shoe 88 Mini video light 84 Mode switch 31 - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 208
to a computer . . 134 Using external video recorders 141 Selecting the memory for playback 55 for recording 40 Self timer Wide angle 48 Wind screen 154 Wireless controller 25 Z Zebra pattern 77 Zoom 48 Digital zoom 153 Zoom speed 48, 152 T Telephoto 48 Time zone/DST 36 Timeline 93 - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 209
follow operating instructions; B) If the Equipment is defective as a result of leaking batteries, sand, dirt or water damage; C) If defects or damages are caused by the use of unauthorized parts or by service other than by Canon USA's factory service centers or authorized service facilities; D) If - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 210
PROPERTY AND TO OTHERS AND THEIR PROPERTY ARISING OUT OF USE, MISUSE OR INABILITY TO USE THE EQUIPMENT NOT CAUSED DIRECTLY BY THE NEGLIGENCE OF CANON USA. (SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU).THIS - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 211
the instruction manual; ii) the use of accessories, attachments, products, supplies, parts or devices with the Equipment that do not conform to Canon specifications or that cause abnormally frequent service problems; iii) repairs or services performed by any party other than a Canon Service Facility - Canon VIXIA HF S30 | VIXIA HF S30 Instruction Manual - Page 212
+852 2428 3963 For support concerning the supplied PIXELA's software, please call PIXELA customer support (see the back cover of the Installation Guide for PIXELA's software). Pour le support technique concernant le logiciel de PIXELA fourni, veuillez contacter le service clientèle PIXELA (voir la
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88
-
89
-
90
-
91
-
92
-
93
-
94
-
95
-
96
-
97
-
98
-
99
-
100
-
101
-
102
-
103
-
104
-
105
-
106
-
107
-
108
-
109
-
110
-
111
-
112
-
113
-
114
-
115
-
116
-
117
-
118
-
119
-
120
-
121
-
122
-
123
-
124
-
125
-
126
-
127
-
128
-
129
-
130
-
131
-
132
-
133
-
134
-
135
-
136
-
137
-
138
-
139
-
140
-
141
-
142
-
143
-
144
-
145
-
146
-
147
-
148
-
149
-
150
-
151
-
152
-
153
-
154
-
155
-
156
-
157
-
158
-
159
-
160
-
161
-
162
-
163
-
164
-
165
-
166
-
167
-
168
-
169
-
170
-
171
-
172
-
173
-
174
-
175
-
176
-
177
-
178
-
179
-
180
-
181
-
182
-
183
-
184
-
185
-
186
-
187
-
188
-
189
-
190
-
191
-
192
-
193
-
194
-
195
-
196
-
197
-
198
-
199
-
200
-
201
-
202
-
203
-
204
-
205
-
206
-
207
-
208
-
209
-
210
-
211
-
212
 |
 |
PUB. DIM-1006-000
English
Français
Español
HD Camcorder
Inst
st
ruction Manual
HD Camcorder
Instruction Manual
Caméscope HD
Manuel d'instruction
Videocámara HD
Manual de Instrucciones