Canon Wireless File Transmitter WFT-E4 II A WFT-E4 II Instruction Manual
Canon Wireless File Transmitter WFT-E4 II A Manual
 |
View all Canon Wireless File Transmitter WFT-E4 II A manuals
Add to My Manuals
Save this manual to your list of manuals |
Canon Wireless File Transmitter WFT-E4 II A manual content summary:
- Canon Wireless File Transmitter WFT-E4 II A | WFT-E4 II Instruction Manual - Page 1
Wireless File Transmitter WFT-E4 II Before using the WFT-E4 II with an EOS 5D Mark II, make sure the camera firmware is Ver. 1.2.0 or later. For details, contact a Canon Service Center. To comply with local radio wave regulations, Canon offers four region-specific versions of the transmitter (WFT-E4 - Canon Wireless File Transmitter WFT-E4 II A | WFT-E4 II Instruction Manual - Page 2
The Wireless File Transmitter WFT-E4 II is an accessory for EOS 5D Mark II camera. It gives the camera wireless and wired LAN functionality and adds a USB port, enabling the following operations. It also includes a vertical-grip shutter button for convenience in vertical shooting. Wireless and - Canon Wireless File Transmitter WFT-E4 II A | WFT-E4 II Instruction Manual - Page 3
Functions When Connected via USB External Media Introduction Record or backup images onto external media GPS Connected by a USB cable Connected via Bluetooth Add the latitude, longitude, altitude, date and time, and other shooting information to images 3 - Canon Wireless File Transmitter WFT-E4 II A | WFT-E4 II Instruction Manual - Page 4
in this manual are trademarks or registered trademarks of their respective owners. Using the transmitter for remote image transfer, capture, or viewing requires adequate knowledge of configuring your wireless or wired LAN and FTP server. Canon cannot provide support for configuring wireless or wired - Canon Wireless File Transmitter WFT-E4 II A | WFT-E4 II Instruction Manual - Page 5
Settings 19 2 Transferring Images to an FTP Server 33 3 Remote Capture Using EOS Utility 47 4 Remote Capture Using WFT Server 53 5 Linked Shooting 65 6 Managing Settings Information 69 7 Using External Media 75 8 Using GPS Devices 87 9 Troubleshooting 95 10 Reference 113 5 - Canon Wireless File Transmitter WFT-E4 II A | WFT-E4 II Instruction Manual - Page 6
Power Outlet...17 Subsequent Organization of This Manual 18 1 Basic Network Settings 19 Getting EOS Utility 47 Configuring EOS Utility Communication Settings 48 Using EOS Utility ...51 4 Remote Capture Using WFT Server 53 Configuring WFT Server Communication Settings 54 Displaying WFT - Canon Wireless File Transmitter WFT-E4 II A | WFT-E4 II Instruction Manual - Page 7
GPS Devices 87 Connecting GPS Devices with a USB Cable 88 Connecting GPS Devices via Bluetooth 91 9 Troubleshooting 95 Responding to Error Messages ...96 Wireless LAN Notes...110 Checking Network Settings...111 10 Reference 113 Creating and Registering Captions 114 Specifications...115 - Canon Wireless File Transmitter WFT-E4 II A | WFT-E4 II Instruction Manual - Page 8
(WFT-E4 IIA, E4 IIB, E4 IIC, and E4 IID) as described below. Please do not use your model (version) of transmitter in regions it was not designed for. For information on other areas where the transmitter can be used, contact a Canon Service Center. Model (Version) Area of Use WFT-E4 IIA United - Canon Wireless File Transmitter WFT-E4 II A | WFT-E4 II Instruction Manual - Page 9
EOS DIGITAL camera. Using it with incompatible cameras may cause malfunction, accidents, and other problems not covered under warranty. Use the transmitter as a wireless or wired LAN device as described in this instruction manual. If you use the transmitter for any other purpose, Canon cannot - Canon Wireless File Transmitter WFT-E4 II A | WFT-E4 II Instruction Manual - Page 10
the transmitter to ensure correct and safe operation. Be sure that you fully understand the safety precautions contained in the instruction manuals nearest Canon Service Center. Handling Precautions The transmitter is a precision instrument. Do not drop it or subject it to shock. The transmitter is - Canon Wireless File Transmitter WFT-E4 II A | WFT-E4 II Instruction Manual - Page 11
Nomenclature Protective cover * Turn the attachment knob to remove. Attachment knob Tripod screw Positioning pin Terminal Positioning pin Battery compartment cover release lever Terminal cap holder AE lock/FE lock/ Index/Reduce button AF start button USB port Ethernet RJ-45 port DC coupler cord - Canon Wireless File Transmitter WFT-E4 II A | WFT-E4 II Instruction Manual - Page 12
Nomenclature LCD panel CF card loading indicator CF card selection mark External media selection mark External media connection indicator Wired LAN connection Wireless LAN connection Recording quality at [Rec. separately] setting Battery level indicator Waterproof/dustproof USB cap * Attach - Canon Wireless File Transmitter WFT-E4 II A | WFT-E4 II Instruction Manual - Page 13
does not have a power switch. It is turned on and off in conjunction with the camera's power switch. Before removing the transmitter, set the camera's power switch to . 1 Remove the terminal cap from the camera. Peel off the terminal cap on the camera bottom to remove. - Canon Wireless File Transmitter WFT-E4 II A | WFT-E4 II Instruction Manual - Page 14
the vertical-grip shutter button and other controls. These controls for shooting can still be used even when batteries are not loaded in the transmitter. Attaching the Hand Strap E1 The Hand Strap E1 (sold separately) is attached as shown in the figure. 1 4 2 5 3 6 After the hand strap is - Canon Wireless File Transmitter WFT-E4 II A | WFT-E4 II Instruction Manual - Page 15
is still connected, you will need to reestablish the connection to the external media, GPS device, or Bluetooth unit. The transmitter's battery is not included. Customers who do not have one should purchase it separately. Installing the battery 1 Open the cover. Slide the lever to open - Canon Wireless File Transmitter WFT-E4 II A | WFT-E4 II Instruction Manual - Page 16
images LAN At Normal Temperature (23°C / 73°F) At Low Temperature (0°C / 32°F) Wireless LAN 2300 2200 Wired LAN 3000 2600 Using a fully charged LP-E6. The number bus-powered external media or GPS devices, or when using Bluetooth units. Removing the battery 1 Open the cover. Slide the lever - Canon Wireless File Transmitter WFT-E4 II A | WFT-E4 II Instruction Manual - Page 17
Using a Household Power Outlet When the AC Adapter Kit ACK-E6 (sold separately) is used, a household power outlet can be used to power the camera without worrying about the battery level. 1 Connect the DC coupler plug. Connect the DC coupler plug to the socket of the AC adapter. 2 Connect the - Canon Wireless File Transmitter WFT-E4 II A | WFT-E4 II Instruction Manual - Page 18
Subsequent Organization of This Manual Click one of the following chapter titles to view the corresponding page. 1 Basic Network Settings (p.19) 2 Transferring Images to an FTP Server (p.33) 3 Remote Capture Using EOS Utility (p.47) 4 Remote Capture Using WFT Server (p.53) 5 Linked Shooting (p.65) 6 - Canon Wireless File Transmitter WFT-E4 II A | WFT-E4 II Instruction Manual - Page 19
Basic Network Settings Complete the basic network settings by following transmitter connection instructions on the camera menu screen. 19 - Canon Wireless File Transmitter WFT-E4 II A | WFT-E4 II Instruction Manual - Page 20
of Movie Individual movie files are large, and wireless file transmission takes some time. When setting up an environment for stable transmission to the wireless LAN terminal, refer to the information on page 110. [LinkedShot] Set up two or more EOS 5D Mark II cameras with attached transmitters. 20 - Canon Wireless File Transmitter WFT-E4 II A | WFT-E4 II Instruction Manual - Page 21
the connection instructions. If an error is displayed, refer to "Troubleshooting" in instructions will be closed during the configuration process. 1 Turn the camera on. 2 Display the transmitter menu. On the camera, press the button. On the [5] tab, select [WFT settings] and press . [WFT - Canon Wireless File Transmitter WFT-E4 II A | WFT-E4 II Instruction Manual - Page 22
For instructions on EOS Utility software included with your camera. In addition to remote capture, all camera operations in EOS Utility are supported. With this option, a wireless or wired network is used instead of the USB cable. Requires a computer with EOS Utility (included with EOS 5D Mark II - Canon Wireless File Transmitter WFT-E4 II A | WFT-E4 II Instruction Manual - Page 23
EOS 5D Mark II cameras attached with transmitters. Up to 10 slave cameras can be linked to the master camera on which you will release the shutter. Note that there will be a slight delay after you release the master camera shutter before the slave cameras shoot. Movie shooting is not supported - Canon Wireless File Transmitter WFT-E4 II A | WFT-E4 II Instruction Manual - Page 24
LAN Type For [LinkedShot] instructions, refer to page 65. Note that no information about [LinkedShot] is given in this chapter. Turn the dial to select the type of LAN, and then press . Select [OK] and press to go to the next screen. Wireless LAN The [Wireless LAN setup method] screen - Canon Wireless File Transmitter WFT-E4 II A | WFT-E4 II Instruction Manual - Page 25
the SSID 4 Indicates the channel used Encryption by Wireless LAN Terminals If the wireless LAN terminal is encrypting AES [Enter connection] and [Search again] To configure settings for the wireless LAN terminal manually, select [Enter connection] and press . Complete the settings for the items - Canon Wireless File Transmitter WFT-E4 II A | WFT-E4 II Instruction Manual - Page 26
LAN terminal. For details on the encryption key, refer to the device's instruction manual. Note that the screens displayed in steps 1 to 3 below vary depending on the authentication and encryption of the wireless LAN terminal. 1 2 The [Key index] screen is displayed only if WEP encryption is - Canon Wireless File Transmitter WFT-E4 II A | WFT-E4 II Instruction Manual - Page 27
is located and how long to press it, refer to the instruction manual of the wireless LAN terminal. Select [OK] and press to establish a connection with the wireless LAN terminal. When the connection with the wireless LAN terminal is established, the [Network] screen (p.29) is displayed. 27 - Canon Wireless File Transmitter WFT-E4 II A | WFT-E4 II Instruction Manual - Page 28
LAN terminal, specify the 8-digit PIN code shown on camera LCD monitor. For instructions on setting PIN codes on the wireless LAN terminal, refer to the instruction manual of the wireless LAN terminal. Select [OK] and press to display the confirmation screen. 3 Establish a connection with - Canon Wireless File Transmitter WFT-E4 II A | WFT-E4 II Instruction Manual - Page 29
settings must be automatically assigned and configured in environments using DHCP servers or wireless LAN terminals or routers supporting DHCP server functions. If an error is displayed, select [Manual setting] regardless of whether the IP address and similar settings are automatically assigned - Canon Wireless File Transmitter WFT-E4 II A | WFT-E4 II Instruction Manual - Page 30
following instructions are for settings screens that vary depending on the communication method (FTP Transfer, EOS Utility, or WFT the [C Drive] [Program Files] [Canon] [EOS Utility] [WFTPairing] folder (in this order), and then double-click the [WFT FirewallSettings] icon. After performing - Canon Wireless File Transmitter WFT-E4 II A | WFT-E4 II Instruction Manual - Page 31
Configuring Network Settings Virtual Keyboard Operation The virtual keyboard is displayed during entry of the encryption key, server name, and other information. Switching to other input areas To switch between input areas, press the button. Moving the cursor To move the cursor, turn the - Canon Wireless File Transmitter WFT-E4 II A | WFT-E4 II Instruction Manual - Page 32
32 - Canon Wireless File Transmitter WFT-E4 II A | WFT-E4 II Instruction Manual - Page 33
Transferring Images to an FTP Server With FTP transfer, you can automatically transfer each image to the FTP server as you shoot or transfer a set of shots together. 33 - Canon Wireless File Transmitter WFT-E4 II A | WFT-E4 II Instruction Manual - Page 34
IP address of the FTP server. If you have set the DNS server IP address setting to [Auto assign] or [Manual setting], the screen at left is displayed. For instructions on screen operations, refer to "Virtual Keyboard Operation" (p.31). Enter the FTP server's server name or IP address. 3 In [Port - Canon Wireless File Transmitter WFT-E4 II A | WFT-E4 II Instruction Manual - Page 35
the connection wizard is closed, the display reverts to the menu screen. Settings information is stored on the camera. It is not stored on the transmitter. The network settings for FTP transfer are now complete. 35 - Canon Wireless File Transmitter WFT-E4 II A | WFT-E4 II Instruction Manual - Page 36
without recording images, they cannot be transferred. Note that automatic transfer of movie is not supported. Transfer the movie after shooting, as described on pages 39-43. 1 In [WFT settings], select [Set up]. 2 Select [Automatic transfer]. Select [Enable]. 3 Take the picture. X The captured image - Canon Wireless File Transmitter WFT-E4 II A | WFT-E4 II Instruction Manual - Page 37
which images to transfer if different sizes of images are recorded to the CF card and external media (p.81), or during RAW+JPEG shooting. 1 In [WFT settings], select [Set up]. 2 Select [Transfer type/size]. 3 Select the size and type of images to transfer. For instance, if the camera is set up - Canon Wireless File Transmitter WFT-E4 II A | WFT-E4 II Instruction Manual - Page 38
add a caption before transferring images. You can also continue shooting even while images are being transferred. Transferring the Current Image 1 In [WFT settings], select [Set up]. 2 Select [Transfer with SET]. Select [Enable]. 3 Select the image. On the camera body, press the button. Select - Canon Wireless File Transmitter WFT-E4 II A | WFT-E4 II Instruction Manual - Page 39
The caption is also added to images stored on the camera. For instructions on creating and registering captions, refer to page 114. You can check Exif information, in the user comments. 1 Take the picture. 2 In [WFT settings], select [Transfer with caption]. X The last captured image is displayed. - Canon Wireless File Transmitter WFT-E4 II A | WFT-E4 II Instruction Manual - Page 40
func.+media select] [Record/play]. You can also continue shooting even while images are being transferred. Selecting Images to Transfer 1 In [WFT settings], select [Image sel./ transfer]. 2 Select [Sel.Image]. X An image is displayed. 3 Select images to transfer. Press . Turn the dial to - Canon Wireless File Transmitter WFT-E4 II A | WFT-E4 II Instruction Manual - Page 41
LAN> lamp blinks. Menu Operation During Image Transfer You can use the menu even during image transfer. However, to prevent transfer problems, some menu items are unavailable during transfer, including [WFT settings], [Protect images], [Erase images], [Format], and [Recording func.+media select]. 41 - Canon Wireless File Transmitter WFT-E4 II A | WFT-E4 II Instruction Manual - Page 42
Batch Transfer Batch Transfer of Images in a Folder 1 In [WFT settings], select [Image sel./ transfer]. 2 Select [Sel.n]. 3 Select [Folder images not transfer'd]. To transfer images that could not previously be transferred, select [Folder images failed - Canon Wireless File Transmitter WFT-E4 II A | WFT-E4 II Instruction Manual - Page 43
Batch Transfer Batch Transfer of Images on CF Cards 1 In [WFT settings], select [Image sel./ transfer]. 2 Select [All image]. 3 Select [Card images not transferred]. To transfer images that could not previously be transferred, select [Card images - Canon Wireless File Transmitter WFT-E4 II A | WFT-E4 II Instruction Manual - Page 44
Checking Image Transfer History Checking the Transfer History of Individual Images To check the transfer history, in [Image sel./transfer], select [Sel.Image]. Image not selected for transfer (no icon) Image selected for transfer Image could not be transferred Image transferred Checking the Transfer - Canon Wireless File Transmitter WFT-E4 II A | WFT-E4 II Instruction Manual - Page 45
are stored is located in the folder of the user currently logged on, or in a subfolder there. Folders for Image Storage Under the default transmitter settings, transferred images will be stored in the root folder specified in the FTP server settings, in a folder structure such as A/DCIM/100EOS5D - Canon Wireless File Transmitter WFT-E4 II A | WFT-E4 II Instruction Manual - Page 46
46 - Canon Wireless File Transmitter WFT-E4 II A | WFT-E4 II Instruction Manual - Page 47
Remote Capture Using EOS Utility You can use EOS Utility to shoot remotely over a wireless or wired LAN. In addition to remote capture, all camera operations in EOS Utility are supported because a wireless or wired network is used with this option instead of the USB cable. 47 - Canon Wireless File Transmitter WFT-E4 II A | WFT-E4 II Instruction Manual - Page 48
instructions are continued from Chapter 1. With EOS Utility, you can use the included WFT Pairing Software to establish a connection between the transmitter and a computer. WFT the WFT-E4 II for the connection. 2 Start the pairing software. Normally, it is installed in the same location as EOS - Canon Wireless File Transmitter WFT-E4 II A | WFT-E4 II Instruction Manual - Page 49
Configuring EOS Utility Communication Settings 3 Double-click the pairing software icon. X dial to select [OK] and press , the connection wizard is closed and EOS Utility starts up. X The lamp on the transmitter is lit in green. Settings information is stored on the camera. It is not - Canon Wireless File Transmitter WFT-E4 II A | WFT-E4 II Instruction Manual - Page 50
on the camera to which the transmitter is attached and start the pairing software. The connection between the camera and computer will be established automatically. You can add the pairing software to the software launched at startup of your computer. In EOS Utility on the [Preferences] [Basic - Canon Wireless File Transmitter WFT-E4 II A | WFT-E4 II Instruction Manual - Page 51
Using EOS Utility For EOS Utility instructions, refer to the Software Instruction Manual (PDF). You can take full advantage of EOS Utility via the transmitter just as via a USB connection, without restrictions. In Remote Live View shooting, the rate of image transmission is slower than via USB. The - Canon Wireless File Transmitter WFT-E4 II A | WFT-E4 II Instruction Manual - Page 52
52 - Canon Wireless File Transmitter WFT-E4 II A | WFT-E4 II Instruction Manual - Page 53
Remote Capture Using WFT Server Using a web browser, you can view images on a CF card in the camera and download them to a computer. Additionally, you can shoot remotely over a wireless or wired LAN. Note that bulb and movie shooting are not supported. 53 - Canon Wireless File Transmitter WFT-E4 II A | WFT-E4 II Instruction Manual - Page 54
WFT Server Communication Settings These instructions are continued from Chapter 1. Press . Turn the dial to select the set number, and then press . Press again. After the connection wizard is closed, the display reverts to the menu screen. X The lamp on the transmitter - Canon Wireless File Transmitter WFT-E4 II A | WFT-E4 II Instruction Manual - Page 55
to prevent conflicts when users at other computers are connected to the transmitter simultaneously. Turn the dial to select [User *], and then screen is displayed. For instructions on input screen operations, refer to "Virtual Keyboard Operation" (p.31). The WFT Server network settings are now - Canon Wireless File Transmitter WFT-E4 II A | WFT-E4 II Instruction Manual - Page 56
Server In the web browser, display WFT Server, a screen for transmitter operations. Make sure you have already established in the procedure on page 55. Click [OK] to display the WFT Server screen. Web browsers that support JavaScript now display the screen on the left below step 4. Otherwise, - Canon Wireless File Transmitter WFT-E4 II A | WFT-E4 II Instruction Manual - Page 57
Viewing Images Browse images on the camera's CF card as follows. 1 Click [Viewer]. X The image viewing screen is displayed. 2 Select the memory card. Click [CF] or the external media. Click the [DCIM] folder and select the folder containing the images. 3 Select an image. To view another image, - Canon Wireless File Transmitter WFT-E4 II A | WFT-E4 II Instruction Manual - Page 58
Viewing Images 4 Download images to the computer. Click a thumbnail. X The image is displayed at a larger size. To download the image to your computer, click < >. Click [Return] to return to the image viewing screen. Although actual RAW images and movies are not displayed here, they can be - Canon Wireless File Transmitter WFT-E4 II A | WFT-E4 II Instruction Manual - Page 59
shooting. Note that remote capture of movies is not supported. For web browsers that do not support JavaScript, refer to page 63, "Remote Capture." 1 Menu ⑥ AF/MF switch ⑯ Live View shooting button ⑦ Shutter speed ⑰ Manual focus button ⑧ Aperture ⑱ Live View image screen ⑨ ISO speed ⑩ - Canon Wireless File Transmitter WFT-E4 II A | WFT-E4 II Instruction Manual - Page 60
View image is not displayed, enable Live View shooting in the menu (⑮). 4 Manually adjust the focus. Click the buttons < >, < >, < >, < >, < >, and < > to adjust the focus. Note that autofocus is not supported during Live View image display. To focus more closely, click < >, < >, or < >. To - Canon Wireless File Transmitter WFT-E4 II A | WFT-E4 II Instruction Manual - Page 61
Remote Capture [Camera control] 5 Configure the shooting settings. Click setting items (such as quality) to view the setting details, which you can configure. Complete the settings as needed. 6 Take the picture. Click the release button (⑤). When you let go of the mouse button, the camera shoots. X - Canon Wireless File Transmitter WFT-E4 II A | WFT-E4 II Instruction Manual - Page 62
. For web browsers that do not support JavaScript, refer to page 63, "Remote Capture." 1 Click [Simple control]. X The basic capture screen is displayed, and Live View image is displayed. Live View image screen Release button Manual focus button Focuses more closely < >< >< >: Focuses - Canon Wireless File Transmitter WFT-E4 II A | WFT-E4 II Instruction Manual - Page 63
Remote Capture The following instructions are for remote capture with web browsers that do not support JavaScript. First, prepare the camera for Live View shooting. Note that remote capture of movies is not supported. 1 Click [Capture]. X The capture screen is displayed. Live View image is not - Canon Wireless File Transmitter WFT-E4 II A | WFT-E4 II Instruction Manual - Page 64
64 - Canon Wireless File Transmitter WFT-E4 II A | WFT-E4 II Instruction Manual - Page 65
, up to 10 slave cameras can be linked in a wireless network (via IEEE 802.11g in ad hoc mode) to the master camera on which you will release the shutter. Any cameras compatible with linked shooting, when they have WFT series transmitters attached, can be used as slave cameras, regardless of model - Canon Wireless File Transmitter WFT-E4 II A | WFT-E4 II Instruction Manual - Page 66
the master camera. Because linked shooting utilizes a wireless connection via IEEE 802.11g in ad hoc mode, it is not available over wired LANs. 1 Display the transmitter menu. On the camera, press the button. On the [5] tab, select [WFT settings] and press . [WFT settings] is added to the tab - Canon Wireless File Transmitter WFT-E4 II A | WFT-E4 II Instruction Manual - Page 67
, select [OK]. X A screen is displayed as the connection is tested. The information you specified is stored on the cameras. It is not stored on the transmitters. 67 - Canon Wireless File Transmitter WFT-E4 II A | WFT-E4 II Instruction Manual - Page 68
100 m / 328 ft. However, the distance supported for linked shooting may be shorter depending on the wireless communication conditions, which are affected by how the compatible with linked shooting, when they have WFT series transmitters attached, can be used as slave cameras, regardless of model. 68 - Canon Wireless File Transmitter WFT-E4 II A | WFT-E4 II Instruction Manual - Page 69
Managing Settings Information 69 - Canon Wireless File Transmitter WFT-E4 II A | WFT-E4 II Instruction Manual - Page 70
Checking Settings Check the network settings as follows. 1 In [WFT settings], select [Set up]. 2 Select [Confirm settings]. X The settings are displayed. Example of FTP transfer and wired LAN settings Example of FTP transfer and wireless LAN settings 70 - Canon Wireless File Transmitter WFT-E4 II A | WFT-E4 II Instruction Manual - Page 71
the setting that determines what happens if an image of the same file name as an existing file is sent to the FTP server. (p.72) 1 In [WFT settings], select [Set up]. 2 Select [LAN settings]. 3 Select desired item from [LAN type], [TCP/IP], [FTP server], or [Wireless LAN] and change the setting. 71 - Canon Wireless File Transmitter WFT-E4 II A | WFT-E4 II Instruction Manual - Page 72
communication over the Internet. It provides effective security for both wireless and wired LANs. To use this function, you must enable Files of the Same Name Configured in [FTP server] [Overwrite same file]. When the transmitter is configured to prevent overwriting If there is already a file - Canon Wireless File Transmitter WFT-E4 II A | WFT-E4 II Instruction Manual - Page 73
Saving and Loading Settings Network settings can be saved on a CF card for use with other cameras. Saving Settings 1 In [WFT settings], select [Set up]. 2 Select [LAN settings]. 3 Select the settings number. Here, select the settings number that identifies the LAN settings. 4 Select [Change]. - Canon Wireless File Transmitter WFT-E4 II A | WFT-E4 II Instruction Manual - Page 74
the extension NIF. You can rename the file as desired by selecting [Change file name]. Loading Settings Load settings files stored on a CF card as follows. Also use this procedure when loading settings files created on a computer. Make sure the settings file is saved in the folder shown when the - Canon Wireless File Transmitter WFT-E4 II A | WFT-E4 II Instruction Manual - Page 75
used, use a self-powered drive. Buspowered drives do not work in some situations. The main image storage area must be formatted with a FAT16 or FAT32 file system. Use media with a main image storage area of less than 1 TB (terabyte), with 512 bytes per sector. Do not use external media equipped with - Canon Wireless File Transmitter WFT-E4 II A | WFT-E4 II Instruction Manual - Page 76
camera. The transmitter USB port is not hot-pluggable. USB cables cannot be connected or disconnected at any time. Follow the instructions in this turn it on after connecting it. 2 In [WFT settings], select [USB device connec.]. If you will not use a wireless or wired LAN at the same time as the - Canon Wireless File Transmitter WFT-E4 II A | WFT-E4 II Instruction Manual - Page 77
image playback are not possible until the connection is established. When the transmitter is connected to the external media, the transmitter's lamp is lit in green and a message is displayed formatted using the camera. Format it with a FAT16 or FAT32 file system using the computer. 77 - Canon Wireless File Transmitter WFT-E4 II A | WFT-E4 II Instruction Manual - Page 78
as shown in step 5. Follow the instructions displayed to terminate the connection. The connection External Media External media is powered via the transmitter's USB port as needed. However, external hard cases. Power Management If you will not use a wireless or wired LAN at the same time as the - Canon Wireless File Transmitter WFT-E4 II A | WFT-E4 II Instruction Manual - Page 79
Choosing Recording Media When Shooting Images can be recorded to external media connected via USB. This enables recording of images to external media without loading the CF card into the camera. You can also create your own DCIM folders for storing images in the external media. When recording movies - Canon Wireless File Transmitter WFT-E4 II A | WFT-E4 II Instruction Manual - Page 80
is OK, press the button. X The created folder is selected. When changing the folder name, always use an eight-character name. For instructions on entering the folder name, refer to "Virtual Keyboard Operation" (p.31). Erasing Images Although "Erase all images on external media (except K images - Canon Wireless File Transmitter WFT-E4 II A | WFT-E4 II Instruction Manual - Page 81
separate recording image quality for the CF card and external media. Making this setting displays the image quality recorded to the external media on the transmitter's LCD panel. Rec. to multiple Whenever an image is captured, the same image is recorded to both the CF card and external media. [Rec - Canon Wireless File Transmitter WFT-E4 II A | WFT-E4 II Instruction Manual - Page 82
cannot be backed up onto CF cards. If the backup destination already has a folder of the same number containing images of the same file number, [Skip image and continue], [Replace existing image], and [Cancel backup] are displayed. Select the backup method and press . • [Skip image and continue - Canon Wireless File Transmitter WFT-E4 II A | WFT-E4 II Instruction Manual - Page 83
When the message indicating completion is displayed, select [OK]. Where the DCIM Folder is Stored The DCIM folder is stored in a directory indicated by a file path such as [u/09103101/]. The target folder name comprises the current date (last two digits of the year, in addition to the month and day - Canon Wireless File Transmitter WFT-E4 II A | WFT-E4 II Instruction Manual - Page 84
the same as for [Quick backup]. 1 Select [Backup]. 2 Select [OK]. 3 Select [Create folder]. 4 Enter the [Folder name]. Always use 8 characters for the folder name. For instructions on entering the folder name, refer to "Virtual Keyboard Operation" (p.31). 84 - Canon Wireless File Transmitter WFT-E4 II A | WFT-E4 II Instruction Manual - Page 85
Backing Up on External Media 5 Select [OK]. X The backup process now begins. When the message indicating completion is displayed, select [OK]. Selecting Images for Backup Only the necessary images can be selected for backup to external media. 1 Select [Backup selected images]. 2 Select the images - Canon Wireless File Transmitter WFT-E4 II A | WFT-E4 II Instruction Manual - Page 86
Backing Up on External Media 3 Select [/], and then press the button. X Select [OK] in the displayed screen. X Backup of the images will be started. The images are stored into the DCIM folder created where the external media is opened (that is, root directory). When backing up to a selected - Canon Wireless File Transmitter WFT-E4 II A | WFT-E4 II Instruction Manual - Page 87
the camera as well as by using GPS-compatible mapping software. The transmitter can be used with Garmin GPSMAP or eTrex series or Magellan eXplorist specific GPS devices supported, contact the Canon Service Center. For GPS device instructions, refer to the device's instruction manual or contact the - Canon Wireless File Transmitter WFT-E4 II A | WFT-E4 II Instruction Manual - Page 88
The transmitter USB port is not hot-pluggable. USB cables cannot be connected or disconnected at any time. Follow the instructions in turn the GPS device on until step 5. 2 In [WFT settings], select [USB device connec.]. If you will not use a wireless or wired LAN at the same time as the GPS device - Canon Wireless File Transmitter WFT-E4 II A | WFT-E4 II Instruction Manual - Page 89
[OK]. X At this point, the menu option [Disconnect] becomes available. Select this option before disconnecting the GPS device. 6 7 Take the picture. Make sure the transmitter's lamp is lit in green before shooting. If the lamp is not lit in green when you shoot, correct GPS data will - Canon Wireless File Transmitter WFT-E4 II A | WFT-E4 II Instruction Manual - Page 90
port, always select [Disconnect] as shown in step 5. Follow the instructions displayed to terminate the connection. The connection will not be terminated if steps to terminate the connection. Power Management If you will not use a wireless or wired LAN at the same time as the GPS device, set [ - Canon Wireless File Transmitter WFT-E4 II A | WFT-E4 II Instruction Manual - Page 91
non-Canon Bluetooth units, confirm normal operation before use. Turn off the GPS device and camera before attaching the Bluetooth unit to the transmitter. The transmitter's USB port is not hot-pluggable. Bluetooth units cannot be connected or disconnected indiscriminately. Follow the instructions in - Canon Wireless File Transmitter WFT-E4 II A | WFT-E4 II Instruction Manual - Page 92
detaching the GPS device. 6 Establish a wireless connection between the GPS device and Bluetooth unit. 7 Turn on the GPS device and GPS device, a password input screen is displayed. Enter the password. X The transmitter now starts to establish a connection with the GPS device. It may take a - Canon Wireless File Transmitter WFT-E4 II A | WFT-E4 II Instruction Manual - Page 93
GPS connection status changes to [Connecting]. Pressing under these conditions will enable you to disconnect the GPS device. 9 Take the picture. Make sure the transmitter's lamp is lit in green before shooting. If the lamp is not lit in green when you shoot, the correct GPS data - Canon Wireless File Transmitter WFT-E4 II A | WFT-E4 II Instruction Manual - Page 94
instructions displayed to terminate the connection. The connection with the Bluetooth unit will not be terminated if you simply turn off the camera. If you detach a Bluetooth unit If you will not use a wireless or wired LAN at the same time as the Bluetooth unit, set [Communication mode] to [ - Canon Wireless File Transmitter WFT-E4 II A | WFT-E4 II Instruction Manual - Page 95
Troubleshooting 95 - Canon Wireless File Transmitter WFT-E4 II A | WFT-E4 II Instruction Manual - Page 96
Responding to Error Messages If transmitter errors are displayed on the camera LCD monitor, refer to the examples of corrective actions in this section to eliminate the cause of the error. The error details can also be checked on the [5] tab [WFT settings] [Error description]. Click the error - Canon Wireless File Transmitter WFT-E4 II A | WFT-E4 II Instruction Manual - Page 97
software and follow the instructions to re-establish the connection. (p.48) Are the transmitter and wireless LAN terminal configured with X If no DHCP server is used, set the transmitter's network setting to [Manual setting] and IP address setting to [Manual setting]. (p.29) What to check on the DHCP - Canon Wireless File Transmitter WFT-E4 II A | WFT-E4 II Instruction Manual - Page 98
Messages 22: No response from DNS server What to check on the transmitter On the transmitter, the DNS address setting is [Auto assign] or [Manual setting]. Does the error occur under these settings? X If no DNS server is used, set the transmitter's DNS address setting to [Disable]. (p.29) On the - Canon Wireless File Transmitter WFT-E4 II A | WFT-E4 II Instruction Manual - Page 99
server. X If applicable, ask your network administrator for the proxy server address or server name and port number, and then enter them on the transmitter. What to check on the network as a whole Does your network include a router or similar device that serves as a gateway? X If applicable, ask - Canon Wireless File Transmitter WFT-E4 II A | WFT-E4 II Instruction Manual - Page 100
, the network setting is [Auto setting]. Does the error occur under this setting? X If no DHCP server is used, set the transmitter's network setting to [Manual setting]. (p.29) What to check on the DHCP server Is the DHCP server on? X Turn the DHCP server on. Are the DHCP server settings for - Canon Wireless File Transmitter WFT-E4 II A | WFT-E4 II Instruction Manual - Page 101
the USB device on. Next, also in [WFT settings], select [USB device connec.] and file system using the computer. The GPS device is incompatible with the transmitter. X Among GPS devices, we recommend devices for which operation has been verified by Canon. 33: USB device error There is a problem - Canon Wireless File Transmitter WFT-E4 II A | WFT-E4 II Instruction Manual - Page 102
server's IP address setting match the server's actual address? X Configure the IP address on the transmitter to match the actual FTP server address. (p.34) Are the transmitter and wireless LAN terminal configured with the same encryption key for authentication? X This error occurs if the encryption - Canon Wireless File Transmitter WFT-E4 II A | WFT-E4 II Instruction Manual - Page 103
access to the FTP server. X You may be able to access the FTP server by setting [Passive mode] to [Enable] on the transmitter. (p.72) If you are using Windows XP Service Pack 2 or later, is access to the FTP server blocked by [Windows Firewall]? X Change the Windows Firewall settings to allow access - Canon Wireless File Transmitter WFT-E4 II A | WFT-E4 II Instruction Manual - Page 104
check the upper- and lower-case characters to make sure the password on the transmitter matches it. (p.35) What to check on the FTP server Do the user rights to the target folder on the FTP server to allow saving images from the transmitter. Is the FTP server on? X Turn the FTP server on. The server - Canon Wireless File Transmitter WFT-E4 II A | WFT-E4 II Instruction Manual - Page 105
error occurs if, for some reason, the transmitter fails to receive confirmation from the FTP server that image file transfer is complete. X Restart the FTP server and camera and send the images again. 51: Connection with Bluetooth unit lost Is the Bluetooth unit too far from the GPS device? X Bring - Canon Wireless File Transmitter WFT-E4 II A | WFT-E4 II Instruction Manual - Page 106
LAN terminal, and configure the same SSID on the transmitter. (p.25) What to check on the wireless LAN terminal Is the wireless LAN terminal on? X Turn on the wireless LAN terminal. When you are using WFT-E4 IID with wireless LAN terminals supporting IEEE 802.11a, are the terminal settings locked on - Canon Wireless File Transmitter WFT-E4 II A | WFT-E4 II Instruction Manual - Page 107
PSK]. (p.25) X When using an AirPort for communication in infrastructure mode, [Open system] is not supported. Configure a [Shared key] on the transmitter. (p.25) Are the transmitter and wireless LAN terminal configured with the same encryption key for authentication? X The setting is case-sensitive - Canon Wireless File Transmitter WFT-E4 II A | WFT-E4 II Instruction Manual - Page 108
wireless LAN encryption method Are the transmitter and wireless LAN terminal configured for the same encryption method? X The transmitter supports the wireless LAN terminal for as long as indicated in the wireless LAN terminal instructions? X Refer to the instruction manual for the wireless LAN - Canon Wireless File Transmitter WFT-E4 II A | WFT-E4 II Instruction Manual - Page 109
Operate slave cameras by following the correct instructions (p.66, 67). Are the slave cameras securely connected? X Reconnect the LAN cable between the transmitter and server. Because the cable may be severed, try mode. 99: Other error Another problem has occurred, identified with an error number other than - Canon Wireless File Transmitter WFT-E4 II A | WFT-E4 II Instruction Manual - Page 110
problems occur. Wireless LAN Terminal Installation and Antenna Position When using the transmitter indoors, install the wireless wireless IEEE 802.11b/g devices, leave a gap of four channels between each wireless LAN channel. For example, use channels 1, 6, and 11, channels 2, 7, and 12, or channels - Canon Wireless File Transmitter WFT-E4 II A | WFT-E4 II Instruction Manual - Page 111
Checking Network Settings Windows Click the Windows [Start] button [All Programs] [Accessories] [Command Prompt]. Type ipconfig/all and press the key. The IP address assigned to the computer is displayed, as well as the subnet mask, gateway, and DNS server information. To avoid using - Canon Wireless File Transmitter WFT-E4 II A | WFT-E4 II Instruction Manual - Page 112
112 - Canon Wireless File Transmitter WFT-E4 II A | WFT-E4 II Instruction Manual - Page 113
Reference 113 - Canon Wireless File Transmitter WFT-E4 II A | WFT-E4 II Instruction Manual - Page 114
Software Instruction Manual (PDF) provided with the camera. Note that captions cannot be created for cameras without an attached transmitter. 1 Start EOS Utility and select [Camera settings/Remote shooting]. X The camera settings/remote capture screen is displayed. 2 On the [ ] tab, select [WFT - Canon Wireless File Transmitter WFT-E4 II A | WFT-E4 II Instruction Manual - Page 115
to the wireless LAN access point WFT-E4 IIA: 5,180 - 5,320 MHz, channels 36 - 64 5,745 - 5,825 MHz, channels 149 - 165 2,412 - 2,462 MHz, channels 1 - 11 WFT-E4 IIB: 5,180 - 5,320 MHz, channels 36 - 64 5,500 - 5,700 MHz, channels 100 - 140 2,412 - 2,472 MHz, channels 1 - 13 WFT-E4 IIC: 5,745 - Canon Wireless File Transmitter WFT-E4 II A | WFT-E4 II Instruction Manual - Page 116
LP-E6; One battery is used. Automatic LAN Wireless LAN Wired LAN Approx. number of images At Normal specifications are based on Canon testing standards. Transmitter specifications and appearance are WFT-E4 IIA : DS585812 WFT-E4 IIB : DS585811 WFT-E4 IIC : DS585813 WFT-E4 IID : DS585814 116 - Canon Wireless File Transmitter WFT-E4 II A | WFT-E4 II Instruction Manual - Page 117
117 - Canon Wireless File Transmitter WFT-E4 II A | WFT-E4 II Instruction Manual - Page 118
118 - Canon Wireless File Transmitter WFT-E4 II A | WFT-E4 II Instruction Manual - Page 119
119 - Canon Wireless File Transmitter WFT-E4 II A | WFT-E4 II Instruction Manual - Page 120
Inc. dat het toestel CH9-1161 in overeenstemming is met de essentiële eisen en de andere relevante bepalingen van richtlijn 1999/5/EG. Hawnhekk, Canon Inc., jiddikjara li dan CH9-1161 jikkonforma mal-ƫtiƥijiet essenzjali u ma provvedimenti oƫrajn relevanti li hemm fid-Dirrettiva 1999/5/EC. Alulírott - Canon Wireless File Transmitter WFT-E4 II A | WFT-E4 II Instruction Manual - Page 121
instructions /TV technician transmitter. The available scientific evidence does not show that any health problems are associated with using low power wireless devices. There is no proof, however, that these low power wireless devices are absolutely safe. Low power Wireless Canon U.S.A Inc. One Canon - Canon Wireless File Transmitter WFT-E4 II A | WFT-E4 II Instruction Manual - Page 122
MEMO 122 - Canon Wireless File Transmitter WFT-E4 II A | WFT-E4 II Instruction Manual - Page 123
MEMO 123 - Canon Wireless File Transmitter WFT-E4 II A | WFT-E4 II Instruction Manual - Page 124
MEMO 124 - Canon Wireless File Transmitter WFT-E4 II A | WFT-E4 II Instruction Manual - Page 125
13 V Vertical shooting 14 W Waterproof/dustproof cap 12 Wireless and Wired LAN Functions A Account 54 Ad hoc 8, Channel 8 Connection 21 D DHCP server 29 DNS address 29 DNS server 34 E Encryption 25, 72 Encryption key 26 EOS Utility 18, 47, 51 EOSUtility 22 Error 96 ESS-ID 25 F File - Canon Wireless File Transmitter WFT-E4 II A | WFT-E4 II Instruction Manual - Page 126
45 Transferring images, automatic 36 Transferring images, individual images .... 38 Troubleshooting 95 U URL 56 V Viewing images 57 W Web 56 WEP 25 WFT Server 18, 53 WFTserver 23 Wi-Fi Protected Setup 27 Wired LAN 24 Wireless LAN specification 8 Wizard 21 WPA2-PSK 25 WPA-PSK 25 WPS - Canon Wireless File Transmitter WFT-E4 II A | WFT-E4 II Instruction Manual - Page 127
G GPS 87 GPS data 89 GPS device 18 H Hard disk 75, 79 M Media 75, 81 Movie 79 P Power 78 Power management 78, 90 Q Quick backup 83 R Rec. separately 81 Rec. to multiple 81 Recording quality 79 S Self-powered 75 T Troubleshooting 95 U USB connection 75 Index 127 - Canon Wireless File Transmitter WFT-E4 II A | WFT-E4 II Instruction Manual - Page 128
Auckland, New Zealand CANON MARKETING JAPAN INC. 16-6, Kohnan 2-chome, Minato-ku, Tokyo 108-8011, Japan This instruction manual is current as of October 2009. For information on using the transmitter with accessories introduced after this date, contact your nearest Canon Service Center. CT1-7836E
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88
-
89
-
90
-
91
-
92
-
93
-
94
-
95
-
96
-
97
-
98
-
99
-
100
-
101
-
102
-
103
-
104
-
105
-
106
-
107
-
108
-
109
-
110
-
111
-
112
-
113
-
114
-
115
-
116
-
117
-
118
-
119
-
120
-
121
-
122
-
123
-
124
-
125
-
126
-
127
-
128
 |
 |
Wireless File Transmitter
WFT-E4 II
To comply with local radio wave regulations, Canon offers four region-specific versions of the
transmitter (WFT-E4 IIA, E4 IIB, E4 IIC, and E4 IID) in various areas around the world (p.8). For
convenience, we refer to the product in this manual simply as “the transmitter,” without
reference to versions A, B, C, or D.
Before using the WFT-E4 II with an EOS 5D Mark II, make sure the camera firmware is Ver.
1.2.0 or later.
For details, contact a Canon Service Center.
E
INSTRUCTION MANUAL