Canon XA10 XA10 Instruction Manual - Page 104
Capturing Photos
View all Canon XA10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
Capturing Video Snapshot Scenes and Photos from a Movie Capturing Photos You can capture a single photo or a series of photos. The size of the captured photos will be 1920x1080 and it cannot be changed. Please read the IMPORTANT section (0 104) before using an Eye-Fi card. 104 To select the photo capture settings 1 Open the [Photo Capture from Video] screen. [MENU] 8 [Photo Capture from Video] 2 Touch [A Single Photo] or [B Photo Sequence] and then touch [a]. To capture the photos 1 Play back the scene or story from which you want to capture the photo. 2 Pause the playback at the point you want to capture. 3 Touch [PHOTO]. • To capture a photo sequence, keep touching [PHOTO]. The scene will be played back frame-byframe and each frame captured as a separate photo. 4 Touch [B] to stop the playback. IMPORTANT • When capturing photos on an Eye-Fi card in memory card slot Y, photos will be uploaded automatically if you are within the range of a configured network. Always verify that Eye-Fi cards have been approved in the country/region of use. See also Using an Eye-Fi card (0 142). NOTES • The data code of the photos will reflect the date and time of recording of the original scene. • Photos captured from a scene with a lot of fast movement may be blurred. • Photos will be recorded on the memory selected for recording photos. • [B Photo Sequence]: - Up to 100 photos can be captured at a time. - The photo sequence capture will stop when the end of the scene is reached (playback will pause at the beginning of the following scene). - Photos will be captured at intervals of 1/30 second (1/24 second, if the scene was recorded at a frame rate of [E PF24] or [ 24P]).