Canon XA10 XA10 Instruction Manual - Page 134
To select individual photos
View all Canon XA10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 134 highlights
Copying Recordings to a Memory Card 134 To select individual photos 1 Touch on the individual photos you want to copy. • A checkmark O will appear on the photos you touch. The total number of selected photos will appear next to the o icon. • Touch a selected photo to remove the checkmark. To remove all checkmarks at once, touch [Remove All] [Yes]. 2 After selecting all the desired photos, touch [OK]. Options [Select] Select individual photos to copy. [All Photos] Copy all the photos. IMPORTANT • Observe the following precautions while the ACCESS indicator is on or flashing. Failing to do so may result in permanent data loss. - Do not open the double memory card slot cover. - Do not disconnect the power source or turn off the camcorder. - Do not change the camcorder's operating mode. • When copying photos onto an Eye-Fi card in memory card slot Y, photos will be uploaded automatically if you are within the range of a configured network. Always verify that Eye-Fi cards have been approved in the country/region of use. See also Using an Eye-Fi card (0 142). NOTES • In the following cases, you will not be able to copy recordings to the memory card: - If the double memory card slot is open. - If the LOCK switch on memory card Y is set to prevent writing. - If there is no memory card in memory card slot Y. • If there is not enough space on memory card Y, as many photos as possible will be copied before stopping the operation.