Canon i900D i900D Easy Setup Instructions

Pinch the paper guide and slide it to the

left. Load a sheet of blank paper in the

paper rest. Slide the guide toward the

left edge of the paper.

3

Paper Guide

USB Port

USB Cable

Continue with Step 6

on side two.

For USB Port:

Insert the ink tank into the correct slot.

(Refer to the color guide on the print head holder.)

Press down until the ink tank clicks into place.

click

Paper Output Tray

Paper Rest

NOTE:

The printer will perform a print

head cleaning after the cover is closed.

TURN THE PRINTER OFF

.

Connect one end of the USB cable to the

computer, the other to the printer.

IMPORTANT:

Be sure the printer is

off before continuing, or the computer

will attempt to install the printer

driver before the printer is ready.

Electrical Contacts

Print Head Nozzles

click

Tilt the print head toward you as you

lower it into the holder.

Remove the print head from its package.

Remove the orange protective cap

from the print head nozzles.

NOTE:

Do not touch the electrical contacts

or the print head nozzles.

Lower the lock lever and press it down

until it clicks into place.

Raise the lock lever on the printer.

Tear at notch to open

POWER

Lamp

POWER

Button

Plug the power cord into the back of the

printer and connect the other end to a

power outlet.

Open the front cover. The print head holder

automatically moves to the left. Remove

the protective tape.

Write down the serial number located to

the left of the print head holder. You will

need this later to register the product.

Shipping Tape

Serial Number

Protective Tape

Press the POWER button. The printer

will initialize.

Remove the shipping tape from the printer.

i

900D Series

Photo Printer

Carefully remove all items from the box.

Documentation

and Software Kit

Photo Paper Tray

Peel back the orange tab and completely

remove the plastic wrapper from the Magenta

Ink Tank (BCI-6M).

Twist off and discard the orange

protective cap.

NOTE:

To avoid spilling ink, never

press on the sides of an ink tank.

Insert the remaining ink tanks into their

assigned slots, p

ressing down until they click

.

Close the front cover and extend the

paper rest and paper output tray.

Protective Cap

Power Cord

i

900D Series Print Head

Ink Tanks

BCI-6Y Yellow

BCI-6M Magenta

BCI-6BK Black

BCI-6C Cyan

BCI-6PM Photo Magenta

BCI-6PC Photo Cyan

1

2

3

4

5

1

5

4

3

1

2

1

2

3

4

5

1

2

Install the Ink Tanks

Unpack the Printer

1

2

3

4

5

Prepare the Printer

Install the Print Head

Connect the Printer

and Load Paper

Start Here

Easy Setup Instructions

i

900D

Series

Photo Printer

Canon i900D i900D Easy Setup Instructions

Canon i900D Manual

Canon i900D manual content summary: