Canon i960 Series i960 Easy Setup Instructions

Pinch the paper guide and slide it to the left.

Load a sheet of blank paper in the paper

rest. Slide the guide toward the left edge

of the paper.

3

Paper

Guide

USB Ports:

Top Port:

USB 2.0

Hi-Speed

USB Cable

Continue with Step 6

on side two.

Bottom Port:

USB 1.1

NOTE:

The printer will perform a print

head cleaning after the cover is closed.

Paper Rest

Paper Output Tray

click

Insert the ink tank into the correct slot.

(Refer to the color guide on the print head holder.)

Press down until the ink tank clicks into place.

Electrical Contacts

Print Head Nozzles

click

TURN THE PRINTER OFF

.

Connect one end of the USB cable

to the computer, the other to the

appropriate USB port on the printer.

If your computer and operating system

support USB 2.0 Hi-Speed, use the

top port. Otherwise, use the bottom port.

IMPORTANT:

Be sure the printer is

off before continuing, or the computer

will attempt to install the printer

driver before the printer is ready.

NOTE:

The

i

960 Series Photo Printer

is equipped with both USB 2.0 Hi-Speed

and USB 1.1 ports

.

If you do not know

your USB version number, connect using

the lower port.

Do not switch port after installation.

Slide the print head into the holder.

The print head will rest at a slight angle.

Remove the print head from its package.

Remove the orange protective cap

from the print head nozzles.

NOTE:

Do not touch the electrical contacts

or the print head nozzles.

Lower the lock lever and press it down

until it clicks into place.

Raise the lock lever on the printer.

Tear at notch to open

Plug the power cord into the back of the

printer and connect the other end to a

power outlet.

Open the front cover. The print head holder

automatically moves to the center. Remove

the protective tape.

Write down the serial number located to

the right of the print head holder. You will

need this later to register the product.

Shipping Tape

POWER

Lamp

POWER

Button

Serial Number

Protective

Tape

Press the POWER button. The printer

will initialize.

Remove the shipping tape from the

front and back of the printer.

i

960 Series

Photo Printer

Carefully remove all items from the box.

Documentation

and Software Kit

Photo Paper Tray

Peel back the orange tab and completely

remove the plastic wrapper from the

Magenta Ink Tank (BCI-6M).

Twist off and discard the orange

protective cap.

NOTE:

To avoid spilling ink, never

press on the sides of an ink tank.

Insert the remaining ink tanks into

their assigned slots.

Close the front cover and extend the

paper rest and paper output tray.

Protective Cap

Ink Tanks

BCI-6Y Yellow

BCI-6M Magenta

BCI-6BK Black

BCI-6C Cyan

BCI-6PM Photo Magenta

BCI-6PC Photo Cyan

Power Cord

i

960 Series Print Head

1

2

3

4

5

1

5

4

3

1

2

1

2

3

4

5

1

2

Install the Ink Tanks

Unpack the Printer

1

2

3

4

5

Prepare the Printer

Install the Print Head

Connect the Printer

and Load Paper

Start Here

Easy Setup Instructions

i

960

Series

Photo Printer

Canon i960 Series i960 Easy Setup Instructions

Canon i960 Series Manual

Canon i960 Series manual content summary: