Canon iPF710 iPF710 User Manual - Page 635

HP-GL/2 problems HP-GL/2 problems With HP-GL/2, printing is misaligned. Cause Corrective Action The plotter origin is incorrect. Check the printing commands. Lines or images are missing in the HP-GL/2 data that was printed. Cause The memory is full. Corrective Action Check the size of the data in the print job. An HP-GL/2 command not supported by this printer Check the print job and settings. was received. The printer has received print data that includes HP RTL commands when Auto Rotate is On. Set Auto Rotate to Off before attempting to print again. (→P.48) Lines Are Printed Too Thick or Thin During HP-GL/2 Printing Cause Corrective Action The Line Width setting in the main menu is incorrect. Conrm the selection in Line Width. If ne lines are printed faint, setting ThickenFineLines to On in the main menu will print the lines more distinctly. (→P.48) HP-GL/2 jobs are printed in monochrome (or color). Cause Corrective Action The color mode is incorrect. On the printer Control Panel, check the color mode setting. (→P.48) For optimal printhead performance, the printer consumes trace amounts of color ink even in monochrome mode. Printed Colors in Line Drawings are Inaccurate During HP-GL/2 Printing Cause Corrective Action AdjustFaintLines in the main menu is set to On. Selecting Off may help produce the expected results. However, lines in some colors may appear broken. HP-GL/2 printing takes a long time. Cause Corrective Action Large print jobs with a lot of data take longer to print. On the printer Control Panel, set Input Resolution to 300dpi. (→P.48) Troubleshooting 621