Canon iPF710 iPF710 User Manual - Page 646

Messages regarding paper Paper size not detected. Cause Corrective Action Paper has been loaded askew, or warped paper has Reload paper straight, in the correct position. been loaded. (→P.110) (→P.135) Insufcient paper for job Cause The printer has received a print job longer than the amount of roll paper left. Corrective Action Follow the steps below to replace the roll. 1.Remove the roll. (→P.113) (→P.114) (→P.115) 2.Load a roll with enough paper left. (→P.107) (→P.109) (→P.110) 3.If no barcode was printed on the roll, specify the paper type. (→P.105) 4.Specify the paper length, unless a barcode has been printed on the roll and you have deactivated the automatic detection function of the remaining roll paper. (→P.106) Hold down the Stop button for a second or more to cancel printing. Press the Online button to resume printing. However, the roll paper may run out during the print job and you may not be able to print all of the document. This paper cannot be used. Check supported paper sizes. Cause Corrective Action Paper that is too large for the printer has been loaded. Load paper of the correct size. (→P.101) Paper that is too small for the printer has been loaded. Load paper of the correct size. (→P.101) 632 Error Message