Canon iPF710 iPF710 User Manual - Page 647

Messages regarding paper Roll printing is selected. Cause You have attempted to print a test print sheet or other printer status information on a roll, but no roll is loaded. Corrective Action Load a roll and try printing again. To print on a sheet instead, hold the Stop button for more than a second to cancel printing, load a sheet, and then print. (→P.81) Roll printing is selected, but sheets are loaded. Cause A print job for rolls was received when a sheet is loaded. Corrective Action Press the OK button and remove the sheet. (→P.139) Load a roll and try printing again. (→P.110) Hold down the Stop button for a second or more to cancel printing. The roll is empty. Cause There is no more paper left on the roll. Corrective Action Follow the steps below to replace the used roll with a new roll of the same type and size. 1.Remove the roll. (→P.113) (→P.114) (→P.115) 2.Load the new roll. (→P.107) (→P.109) (→P.110) 3.If no barcode was printed on the roll, specify the paper type. (→P.105) 4.If no barcode was printed on the roll, specify the paper length. (→P.106) Error Message 633