Canon iPF710 iPF710 User Manual - Page 651

Messages regarding paper Borderless printng not possible. Check roll position. Cause The paper is loaded askew. Corrective Action Press the Load/Eject button and reload the paper. Insert the roll rmly until it touches the ange of the Roll Holder. (→P.107) (→P.109) (→P.110) If you press the Online button and continue printing, the document will be printed with a border. The paper loaded is not compatible with borderless printing. Load paper compatible with borderless printing and try printing again. Paper you can use for borderless printing is restricted to particular types of paper and rolls of particular widths. For information on types of paper compatible with borderless printing, refer to the Paper Reference Guide. (→P.95) Because paper expands or contracts depending on Use each type of paper only where the recommended the environment of use, it may become narrower or environmental conditions are met. For details on wider than the supported width for borderless printing. environmental conditions for various paper, see the Paper Reference Guide. (→P.95) Check supported paper. Cause Corrective Action The print job received species a type or width of paper that is not compatible with borderless printing. Follow these steps to change the settings of the print job to enable borderless printing. 1.Hold down the Stop button for a second or more to cancel printing. 2.Make sure the correct printer driver for the printer is selected and try printing again. For information on types of paper compatible with borderless printing, refer to the Paper Reference Guide. (→P.95) If you press the Online button and continue printing, the document will be printed with a border. Error Message 637