Canon iPF710 iPF710 User Manual - Page 654

Messages regarding printing or adjusment Messages regarding printing or adjusment Use another paper. Cause The Printhead and feed amount cannot be adjusted when highly transparent lm is loaded. Corrective Action We recommend using a type of paper that you often use, other than lm, for Printhead adjustment. (→P.542) Adjust the feed amount manually. (→P.552) Cannot print as specied. Lift the release lever and replace paper with A4/LTR (vertical) or larger Cause Corrective Action The loaded paper is too small. Switch to paper A4/Letter (vertical) or larger. Lift the release lever and replace roll with 10 in. wide or larger roll Cause Corrective Action The loaded paper is too small. Load a roll 10 inches wide or larger. Cannot adjust band. Cause The Printhead nozzles are clogged. Corrective Action Follow the steps below to check the nozzles. 1.Print a test pattern to check the nozzles. (→P.567) 2.Clean the Printhead if the nozzles are clogged. (→P.568) Highly transparent lm is loaded that cannot be used Adjust the feed amount manually. for feed amount adjustment. (→P.552) Cannot adjust printhead. Cause The Printhead nozzles are clogged. Corrective Action Follow the steps below to check the nozzles. 1.Print a test pattern to check the nozzles. (→P.567) 2.Clean the Printhead if the nozzles are clogged. (→P.568) Highly transparent lm is loaded that cannot be used We recommend using a type of paper that you often for Printhead adjustment. use, other than lm, for Printhead adjustment. (→P.542) 640 Error Message