Canon imageCLASS 2300 Reference Guide for imageCLASS 2300 - Page 60
Press [F3], or [F4], to select the paper size, press
View all Canon imageCLASS 2300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
IMPORTANT Do not print on the underside of the envelopes (the side with the flap). If the envelopes become filled with air, flatten them by hand before loading them into the stack bypass. Flap 2 Take particular care to spread the envelopes out in the direction they will be fed. ❑ Load the envelopes, as shown below. Basic Operations IMPORTANT Depending on the paper type or condition of the envelopes, the printing quality may deteriorate or a paper jam may occur. In such a case, it is recommended to change the type of envelopes. If you are printing data from a personal computer, always load the envelopes, as shown above. F3 4 Press [F3] (M) or [F4] (L) to select the paper size © press F4 [OK]. OK Making Prints Using the Stack Bypass 2-17
Making Prints Using the Stack Bypass
2-17
Basic Operations
2
IMPORTANT
Do not print on the underside of the envelopes (the side with the
fl
ap).
If the envelopes become
fi
lled with air,
fl
atten them by hand before loading them
into the stack bypass.
Take particular care to spread the envelopes out in the direction they will be fed.
❑
Load the envelopes, as shown below.
IMPORTANT
Depending on the paper type or condition of the envelopes, the printing quality may
deteriorate or a paper jam may occur. In such a case, it is recommended to change
the type of envelopes.
If you are printing data from a personal computer, always load the envelopes, as
shown above.
4
Press [F3] (
▼
) or [F4] (
▲
) to select the paper size
➞
press
[OK].
Flap
F3
F4
OK