Canon imageCLASS D1150 imageCLASS D1180/D1170/D1150/D1120 Basic Operation Guid - Page 171

Adjusting the Pause Time Adjusting the Pause Time Some overseas dialing may be affected by the distance or complex routing of connections when dialing the international access code, country code, and the destination's telephone number all at once. In such cases, insert a pause after the international access code. When the machine dials the number, it will pause where the pause was inserted in the number. This helps to improve the connection. The default setting is two seconds. - You can insert a pause when you dial the fax number using - [numeric keys]. (See "Dialing an Overseas Number (With Pauses)," on p. 6-15.) - Pauses entered at the end of dialed fax numbers are always 10 seconds long. 1 Press [Menu]. 2 Press or to select , then press [OK]. MENU 4.TX/RX SETTINGS 3 Press or to select , then press [OK]. TX/RX SETTINGS 3.FAX SETTINGS 4 Press or to select , then press [OK]. FAX SETTINGS 3.TX SETTINGS 5 Press or to select , then press [OK]. TX SETTINGS 2.PAUSE TIME 6 Use , , or - [numeric keys] to set the pause time, then press [OK]. PAUSE TIME 2SEC The pause time can be set from 1 to 15 seconds in one second increments. 7 Press [Stop/Reset] to return to the standby mode. Fax (D1180/D1170/D1150) 6-40