Canon imageCLASS D1150 imageCLASS D1180/D1170/D1150/D1120 Basic Operation Guid - Page 232
Replacing the Toner Cartridge with a New One, When the message <OUT OF TONER/CHANGE TONER>
View all Canon imageCLASS D1150 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 232 highlights
6 Align the toner cartridge to the guides in the machine and slide the cartridge completely into the machine until it stops. Replacing the Toner Cartridge - When is set, the printed documents may be light or blurred because of lack of toner. The data is erased when the documents are printed out, so you can not print the same documents again. (See "TX/RX SETTINGS ," on p. 13-6.) 1 If you are using the multi-purpose tray, fold multi-purpose tray extension, push back the auxiliary tray into place, and then close the multi-purpose tray. 7 Close the front cover. 2 Push the open button. Maintenance - Be careful not to get your fingers caught. - If you cannot close the front cover, do not force it to close. Open the cover and make sure the toner cartridge is properly set in the machine. Replacing the Toner Cartridge with a New One When the message appears, replace the toner cartridge with a new one. When toner empty error occurs while receiving fax, printing fax is interrupted and the received data will be stored in the memory. If you set , you can keep printing fax documents or reports without replacing the toner cartridge. (See "TX/RX SETTINGS ," on p. 13-6.) 3 Open the front cover. 11-9