Canon imageCLASS MF4880dw Wireless Guide
Canon imageCLASS MF4880dw Manual
 |
View all Canon imageCLASS MF4880dw manuals
Add to My Manuals
Save this manual to your list of manuals |
Canon imageCLASS MF4880dw manual content summary:
- Canon imageCLASS MF4880dw | Wireless Guide - Page 1
Prepare for Wireless LAN Connection P.2 Setting the Wireless LAN P.4 Installing the Software P.10 Troubleshooting P.14 Read this guide before setting up the wireless LAN This guide describes the wireless LAN set up procedure, and problems encountered during the configuration. After you finish reading - Canon imageCLASS MF4880dw | Wireless Guide - Page 2
properly? For more information, see the instruction manual for the network device you are using, or contact the networking device manufacturer. administrator. When proceeding from "Connecting the Power Cord" in the Starter Guide Proceed to "Check Your Router." on P.3. Step 2 Switch the Connection - Canon imageCLASS MF4880dw | Wireless Guide - Page 3
To setup with "WPS PIN Code Mode," or setup manually: "Setting the Machine Using WPS (PIN Code Mode)" in the e-Manual. "Setting by Manually Selecting an Access Point" in the e-Manual. 1 Prepare for Wireless LAN Connection 2 Setting the Wireless LAN 3 Installing the Software 4 Troubleshooting 3 - Canon imageCLASS MF4880dw | Wireless Guide - Page 4
Setting the Wireless LAN Push Button Mode Setting via WPS Read the instruction manual for your network device first to learn how to configure the settings. (Menu) See Wireless LAN Setting Guide to perform settings. OK Menu Network Settings Preferences Timer Settings Copy Settings • Press [▲] or - Canon imageCLASS MF4880dw | Wireless Guide - Page 5
the button until the lamp lights or blinks. * The time that you should hold the button may vary depending on the router you are using. Move to the machine When an error message appears: Press [OK] Wireless LAN Connection 2 Setting the Wireless LAN 3 Installing the Software 4 Troubleshooting 5 - Canon imageCLASS MF4880dw | Wireless Guide - Page 6
Network Key Fill in the blanks on the right after checking one of the following methods. Check a label attached on the wireless LAN router. SSID ɿ999999999999 Network Keyɿ999999999999 ɾ ɾ ɾ Check using Canon MF/LBP wireless Setup Assistant* * Included in User Software CD-ROM, which is supplied - Canon imageCLASS MF4880dw | Wireless Guide - Page 7
Enter the network key using the numeric keys. Press [▲] or [▼] to highlight . Do you want to connect with new settings? Yes No • Press [◀] to highlight . Next Page 1 Prepare for Wireless LAN Connection 2 Setting the Wireless LAN 3 Installing the Software 4 Troubleshooting 7 - Canon imageCLASS MF4880dw | Wireless Guide - Page 8
completed. The IP address is set during this time period. Proceed to P.9 When an error message appears: Press [OK] to close the screen, check whether the network key is the following. "When an Error Message Appears" (P.14) When setting IP address manually: "Setting by Manually Entering SSID" in the - Canon imageCLASS MF4880dw | Wireless Guide - Page 9
Monitor/Cancel Coy Job Status Fax Job Status/Hist... Print Job 10 • Take note of the IP address. When the screen is not displayed correctly: "The Remote UI is not displayed." (P.17) 1 Prepare for Wireless LAN Connection 2 Setting the Wireless LAN 3 Installing the Software 4 Troubleshooting - Canon imageCLASS MF4880dw | Wireless Guide - Page 10
not use the scan function in the IPv6 environment. ˛ User Software CD-ROM ◀ Click! • Printer, fax, scanner drivers, and MF Toolbox will be installed. • Select [Custom Installation] to install Presto! PageManager and the e-Manual. When the screen is not displayed correctly: • Windows XP/Server - Canon imageCLASS MF4880dw | Wireless Guide - Page 11
requires Mac OS X 10.5.8 version or later. The installation screen varies depending on the version of Mac OS X. This operation is for Macintosh. If using Windows, proceed to P.10. ˛ Insert the User Software CD-ROM and double-click the CD-ROM icon. ˝ ◀ Double-click! ˝ Follow the instructions on - Canon imageCLASS MF4880dw | Wireless Guide - Page 12
proceed to next step.. ˝ ◀ Click! ◀ Select ◀ Select ◀ Click Select a printer name for which [Bonjour] is displayed in the [Kind] or [Connection] column. If you are using Mac OS X 10.5.x, select the corresponding driver from [Print Using]. • An IP address is automatically configured by the - Canon imageCLASS MF4880dw | Wireless Guide - Page 13
Installing the Software ◀ Click! • If you are using Mac OS X 10.5.x, select [Select a driver to use] and the corresponding driver from [Print Using], and then click [Add]. ˝ ◀ Click! ◀ Check that this machine is added. Computer connection via the wireless LAN is now complete. 1 Prepare for - Canon imageCLASS MF4880dw | Wireless Guide - Page 14
Troubleshooting When an Error Message Appears Could not connect. More than one access point was detected. Close Action • Wait for a while and try again. Cannot find access point. Close Action 1 • Router's push button might not be pressed in the time limit. Repeat the setup are using supports WPS - Canon imageCLASS MF4880dw | Wireless Guide - Page 15
to change the setting to . (See the e-Manual) If the message still appears: Change the MAC address for the machine and the computer you are using to the allowed settings. 1 Prepare for Wireless LAN Connection 2 Setting the Wireless LAN 3 Installing the Software 4 Troubleshooting 15 - Canon imageCLASS MF4880dw | Wireless Guide - Page 16
Troubleshooting If Problems Occur The SSID of the wireless LAN router or access point (P.6) Cause 2 The machine cannot detect the wireless LAN router or access points because there is a problem with the network connection. Action • Check the network connection. "Cannot Connect to the Network" (P.18 - Canon imageCLASS MF4880dw | Wireless Guide - Page 17
Troubleshooting The Remote UI is not displayed. Cause 1 The machine's IP address is not set correctly. Action • Enable the DHCP function for the wireless LAN router or access point, and specify the setting again. See the instruction manual LAN 3 Installing the Software 4 Troubleshooting 17 - Canon imageCLASS MF4880dw | Wireless Guide - Page 18
Troubleshooting the Internet even after checking: • Turn OFF each device and turn each one back ON. • Wait a few moments, and reconnect to the Internet. Check ON, turn the power OFF and turn it back ON. Check the installation sites for the machine and the wireless LAN router (access point). • - Canon imageCLASS MF4880dw | Wireless Guide - Page 19
is the case, change the settings of the wireless LAN router (access point). • The MAC address filtering is enabled. • An encryption method only when communicating using IEEE802.11n: WEP or TKIP For the operation method of the wireless LAN router (access point), read the instruction manual for the - Canon imageCLASS MF4880dw | Wireless Guide - Page 20
/Access Point You can check the SSID or the network key using "Canon MF/LBP Wireless Setup Assistant," which is included in the supplied User Software CD-ROM SSID (Network or Access Point)" (P.6). Select the SSID that matches the one you wrote down from the displayed SSID in step . Write down - Canon imageCLASS MF4880dw | Wireless Guide - Page 21
21 - Canon imageCLASS MF4880dw | Wireless Guide - Page 22
22 - Canon imageCLASS MF4880dw | Wireless Guide - Page 23
23 - Canon imageCLASS MF4880dw | Wireless Guide - Page 24
the Service Center When you have a problem with your machine, refer to "Troubleshooting" in the Basic Operation Guide or the e-Manual first. If you cannot solve the problem after referring the manuals, contact the Canon Authorized Service Facilities or the Canon Customer Care Center. Canon Customer
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
 |
 |
▲
Wireless LAN
Setting Guide
Read this guide before setting up the wireless LAN
Read this guide before setting up the wireless LAN
This guide describes the wireless LAN set up procedure, and problems encountered during the con
fi
guration.
This guide describes the wireless LAN set up procedure, and problems encountered during the con
fi
guration.
After you
fi
nish reading this guide, store it in a safe place for future reference. See the “Starter Guide” for
After you
fi
nish reading this guide, store it in a safe place for future reference. See the “Starter Guide” for
machine installation and settings for connection methods other than the wireless LAN.
machine installation and settings for connection methods other than the wireless LAN.
Prepare for Wireless LAN Connection
Prepare for Wireless LAN Connection
P.2
Setting the Wireless LAN
Setting the Wireless LAN
P.4
Installing the Software
Installing the Software
P.10
Troubleshooting
Troubleshooting
P.14