Canon imageCLASS MF5770 imageCLASS MF5730 Set-Up Instructions
Canon imageCLASS MF5770 Manual
 |
View all Canon imageCLASS MF5770 manuals
Add to My Manuals
Save this manual to your list of manuals |
Canon imageCLASS MF5770 manual content summary:
- Canon imageCLASS MF5770 | imageCLASS MF5730 Set-Up Instructions - Page 1
Thank you for purchasing Canon imageCLASS MF5730. To get your machine ready for use, please follow the instructions in this document before referring to any other documentation. Unpack the machine and its components. Check that you have the following: ● Cartridge ● Cassette extension ● Machine - Canon imageCLASS MF5770 | imageCLASS MF5730 Set-Up Instructions - Page 2
times to evenly distribute the toner inside. 3 Hold the cartridge on a flat stable surface with one hand, and break the tab ➊ and pull out the seal ➋ completely with the other hand. B 4 Pull open the front cover. A 5 Hold the cartridge so that the instructions (A) and the arrow (B) are facing - Canon imageCLASS MF5770 | imageCLASS MF5730 Set-Up Instructions - Page 3
correctly. To load Legal-size paper: Pull the blue tab ➊ and extend the cassette ➋ as far as it will go. Keep the rear paper end guide to LTR size mark. If you are not using Legal-size paper, skip to the next step without extending the cassette. A 5 Load the paper into - Canon imageCLASS MF5770 | imageCLASS MF5730 Set-Up Instructions - Page 4
A B 7 Even out the edges of the paper stack. Make sure the height of the stack does not exceed the limit marks (A) and that the side edges of the stack are below the hooks (B). 8 Insert the paper cassette back into the machine as far as it will go. NOTE ● If you do not completely insert the - Canon imageCLASS MF5770 | imageCLASS MF5730 Set-Up Instructions - Page 5
the rear socket ➊. Then connect the other end to the wall outlet ➋. 2 Once it is warmed up, the standby display appears in the LCD. IMPORTANT ● For important safety instructions on installation and handling of the machine, see "Important Safety Instructions" in the Basic Guide. NOTE ● Make sure the - Canon imageCLASS MF5770 | imageCLASS MF5730 Set-Up Instructions - Page 6
, go back to the previous screen by clicking [Back], and select [USB Connection]. NOTE ● The instructions below are for Windows XP/Server 2003. For Windows 98/Me/2000, see the Software Guide (included in the User Software CD). ● For Windows 2000/XP/Server 2003, log on as Administrator to install the - Canon imageCLASS MF5770 | imageCLASS MF5730 Set-Up Instructions - Page 7
the installation is complete, click [Exit] to close the MF Drivers-Setup Wizard screen. 9 On the MF Setup screen, click [Install MF Toolbox]. 10 When the MF Toolbox-Setup Wizard screen appears, click [Next] and follow the instructions on the screen. NOTE ● Before installing MF Toolbox, make sure - Canon imageCLASS MF5770 | imageCLASS MF5730 Set-Up Instructions - Page 8
driver software, see the Software Guide (included in the User Software CD). NOTE ● Remember to register your machine to ensure product support. The serial number is located on the back of the machine. For installation help and operational instructions, call us at: 1-800-828-4040 1-800 OK CANON
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
 |
 |
Set-Up Instructions
Set-Up Instructions
Thank you for purchasing Canon imageCLASS MF5730.
To get your machine ready for use,please follow the instructions in this document before referring to any other documentation.
Unpack the machine and its components.
Check that you have the following:
●
Machine
●
Cartridge
NOTE
●
The cartridge included with the machine is Cartridge X25 that yields approximately 2,500 pages of printouts (Letter at 4%
dot coverage).
Before setting up the machine:
1
Place the machine on a flat, stable surface.
2
Remove
all
shipping tape from the
exterior
of the machine.
Referring to the following figure, remove the tape and spacers on both sides of the
cassette housed in the machine.
●
Cassette extension
●
Extension cover
●
Power cord
●
USB cable
●
Set-Up Instructions
●
Basic Guide
●
Warranty
●
Limited Warranty Note for Cartridge X25
●
Registration Card
●
MF5700 Series User Software CD-ROM