Canon imageFORMULA CR-50 CR-50/80 Installation Guide

Canon imageFORMULA CR-50 Manual

Canon imageFORMULA CR-50 manual content summary:

  • Canon imageFORMULA CR-50 | CR-50/80 Installation Guide - Page 1
    Installation Guide ♦ Please read this manual before operating this scanner.
  • Canon imageFORMULA CR-50 | CR-50/80 Installation Guide - Page 2
    you to use the SOFTWARE. No updates, fixes or support will be made available for the SOFTWARE. 4. LIMITED WARRANTY AND DISCLAIMER OF INDEMNITY: Canon, Canon's affiliate, their distributor or dealer will not guarantee uninterrupted service, or absence or correction of errors. Therefore, the SOFTWARE
  • Canon imageFORMULA CR-50 | CR-50/80 Installation Guide - Page 3
    instructions, manual. If such changes or modifications should be made, you could be required to stop operation of the equipment. Canon U.S.A. Inc. One Canon service. For more information regarding return and recycling of WEEE products, please visit www.canon CR-50: Model M111101 CR-80: Model M111102 3
  • Canon imageFORMULA CR-50 | CR-50/80 Installation Guide - Page 4
    also be trademarks or registered trademarks in other countries. • imageFORMULA is a trademark of CANON ELECTRONICS INC. • Microsoft, Windows, Windows XP, Windows THE MAXIMUM LIABILITY OF CANON ELECTRONICS INC. UNDER THIS WARRANTY IS LIMITED TO THE PURCHASE PRICE OF THE PRODUCT COVERED BY THE WARRANTY.
  • Canon imageFORMULA CR-50 | CR-50/80 Installation Guide - Page 5
    up the CR-50/80 in accordance with the Installation Guide. For details on the CR-50/80, refer to the Instructions (electronic manual). Operation & Maintenance Guide (Supplied with the scanner/ Electronic Manual) Describes the basic operations for using the CR-50/80, troubleshooting, and maintenance
  • Canon imageFORMULA CR-50 | CR-50/80 Installation Guide - Page 6
    Table of Contents INTRODUCTION 5 Manuals for the CR-50/80 5 Symbols Used in This Manual 5 Important Safety Instructions 7 Handling 7 Disposal 8 Turning OFF the Power 15 Preparing the Ink Cartridge 16 About the Ink Cartridge 16 Setting the Ink Cartridge and Adjusting the Print Position ... 16
  • Canon imageFORMULA CR-50 | CR-50/80 Installation Guide - Page 7
    Safety Instructions Handling Before you clean the scanner, turn the power OFF and disconnect the power cord from the power outlet. ■ To clean the scanner's power outlet. Contact your local authorized Canon dealer or service representative to have the scanner serviced. ■ Before you move the scanner
  • Canon imageFORMULA CR-50 | CR-50/80 Installation Guide - Page 8
    50°F to 90.5°F) Relative humidity: 20% to 80% RH 20% to 50% RH when using the imprinter Use the recommended operating environment for the ink cartridge relating to the power supply, contact your local authorized Canon dealer or service representative for further information. ● Never place an object
  • Canon imageFORMULA CR-50 | CR-50/80 Installation Guide - Page 9
    Moving the Scanner When you move the CR-50/80, hold it firmly with both hands and carry it carefully. Do not hold the scanner by the Eject Stopper. The scanner weighs approximately 2 kg (4.4
  • Canon imageFORMULA CR-50 | CR-50/80 Installation Guide - Page 10
    are missing, contact your local authorized Canon dealer. CR-50/80 Setup Disc Marking Labels for Thickness Adjustment Dial Power Cord*1 USB Cable AC Adapter Warranty Card*2 User Registration Card*2 Installation Guide Operation & Maintenance Guide
  • Canon imageFORMULA CR-50 | CR-50/80 Installation Guide - Page 11
    environment. (See "Checking Your Operating Environment" on p. 12.) IMPORTANT • To have the device drivers installed automatically when the computer recognizes the CR-50/80, the software needs to be installed before the CR-50/80 is connected to the computer. • If you connect the computer and turn ON
  • Canon imageFORMULA CR-50 | CR-50/80 Installation Guide - Page 12
    Environment The following computer system requirements are recommended for using the CR-50/80. Operating Systems: • Microsoft Windows XP (32bit) SP3 Utility Follow the instructions below to install the Scanning Utility and the dedicated driver. NOTE The dedicated scanner driver is installed after
  • Canon imageFORMULA CR-50 | CR-50/80 Installation Guide - Page 13
    turn the scanner OFF or unplug the interface cable. • Do not connect multiple CR-50/80 scanners to one computer. CAUTION • Do not turn OFF the scanner or remove Hi-Speed USB 2.0 cable. Installation starts. 6 Follow the instructions on the screen to complete the installation. IMPORTANT The computer
  • Canon imageFORMULA CR-50 | CR-50/80 Installation Guide - Page 14
    rated voltage and power supply frequency (either 120 V, 60 Hz or 220-240 V, 50/60 Hz, depending on your region). • Do not plug the scanner into a a problem with the scanner. Turn OFF the power, and contact your local authorized Canon dealer or service representative to have the scanner serviced.
  • Canon imageFORMULA CR-50 | CR-50/80 Installation Guide - Page 15
    80 as new hardware, and installation starts automatically. (Windows 7) NOTE The CR-50/80 will be registered as "CANON CR-50 USB" or "CANON CR-80 USB" in the Imaging Device directory. Turning OFF the Power 1 Turn OFF your computer. 2 To turn OFF the scanner, slide the Power Switch to
  • Canon imageFORMULA CR-50 | CR-50/80 Installation Guide - Page 16
    is set, replace the Maintenance Cover, and then turn the scanner back ON. • Finish up the unpacked ink cartridge as soon as possible. More frequent cleaning of the ink cartridge is required if long time elapses after unpacking. 1 Hook your finger around the open lever and open the Maintenance
  • Canon imageFORMULA CR-50 | CR-50/80 Installation Guide - Page 17
    electrical contact and reduced print quality. 4 Grasp the tag and then peel off the tape covering the ink jet nozzle. 5 Place the ink cartridge shown in the diagram below. IMPORTANT Do not touch the ink jet nozzle or contacts after peeling off the tag and tape. CAUTION Do not touch the electrical
  • Canon imageFORMULA CR-50 | CR-50/80 Installation Guide - Page 18
    properly, see step 7. 7 Squeeze the Print Position Adjustment Lever and move it to adjust the print position. Ink Cartridge Ink Cartridge Holes Pins 8 Carefully replace the Imprinter Cover. Top: 50.5 mm (1.99") from the bottom edge of the document Middle: 47 mm (1.85") from the bottom edge
  • Canon imageFORMULA CR-50 | CR-50/80 Installation Guide - Page 19
    Document Feeding and Scanning For details on the operations, refer to the Instructions (Electronic Manual) on p. 33 or the Operation & Maintenance Guide (Manual) on p. 6. 19
  • Canon imageFORMULA CR-50 | CR-50/80 Installation Guide - Page 20
    Index A Adjusting the Print Position 16 D Disposal 8 H Handling 7 I Ink Cartridge 16 Installation Location 8 Installing the Scanning Utility 12 M Moving the Scanner 9 O Operating Environment 12 P Power Cord 10, 14 Power Supply 8 Print Position Adjustment Lever 16 R
  • Canon imageFORMULA CR-50 | CR-50/80 Installation Guide - Page 21
    INC. 1248, SHIMOKAGEMORI, CHICHIBU-SHI, SAITAMA 369-1892, JAPAN CANON U.S.A. INC. ONE CANON PLAZA, LAKE SUCCESS, NY 11042, U.S.A. CANON CANADA INC. 6390 DIXIE ROAD, MISSISSAUGA, ONTARIO L5T 1P7, CANADA CANON EUROPA N.V. BOVENKERKERWEG 59-61, P.O.BOX 2262, 1180 EG AMSTELVEEN, THE NETHERLANDS
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21

Please read this manual before operating this scanner.
Installation Guide