Canon imageFORMULA DR-C240 WA10 User Manual
Canon imageFORMULA DR-C240 Manual
 |
View all Canon imageFORMULA DR-C240 manuals
Add to My Manuals
Save this manual to your list of manuals |
Canon imageFORMULA DR-C240 manual content summary:
- Canon imageFORMULA DR-C240 | WA10 User Manual - Page 1
for the WA10 Network Adapter for the Canon imageFORMULA DR series. To use this device, read this manual together with the instructions for the scanner to be connected. Procedures and Example Screens This manual describes operations using Windows 7 as examples. Table of Contents Safety Precautions - Canon imageFORMULA DR-C240 | WA10 User Manual - Page 2
imageFORMULA is a trademark of CANON ELECTRONICS INC. ● Microsoft and Windows DOCUMENTS, YOU THE CUSTOMER ARE RESPONSIBLE FOR INSPECTING THE SCANNED IMAGES AND VERIFYING THAT DATA IS INTACT. THE MAXIMUM LIABILITY OF CANON ELECTRONICS INC. UNDER THIS WARRANTY IS LIMITED TO THE PURCHASE PRICE installed - Canon imageFORMULA DR-C240 | WA10 User Manual - Page 3
to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However - Canon imageFORMULA DR-C240 | WA10 User Manual - Page 4
(2.400 to 2.4835 GHz). Other users of these frequencies include products such installation). 3. Otherwise, if troubles office, waste authority, approved WEEE scheme or your household waste disposal service. For more information regarding return and recycling of WEEE products, please visit www.canon - Canon imageFORMULA DR-C240 | WA10 User Manual - Page 5
version may be used only in its applicable country/region. For regions not included in the following list, contact customer service. Version Name Product Code Applicable Country/Region Wireless LAN Standard Corresponding Channels Maximum Wireless Output WA10 JP 2999C001 3126C001 Japan WA10 - Canon imageFORMULA DR-C240 | WA10 User Manual - Page 6
base station (access point) in the network environment, any computer in the network can use the scanner. The device is very simple to connect if the access point supports WPS (Wi-Fi Protected Setup). Names of Parts A B H C 1 2 D 3 4 E F G A Power button Turns on this device. The power - Canon imageFORMULA DR-C240 | WA10 User Manual - Page 7
Lamps 3 Connection 4 Status Meaning Lit (green) Station mode: connecting to the access point See "Network modes" (p. 10) DHCP setting on in wired LAN mode Lit (red) Initializing setup Blinking (green) WPS executing Blinking (red) WPS Error Lit (orange) Starting up in AP - Canon imageFORMULA DR-C240 | WA10 User Manual - Page 8
acquiring and installing the driver, visit the Canon support website. http://www.canon-elec.co.jp/products/ims/softwareDownload/ index.html Supported scanners This unit supports the following scanners. Scanner DR-C230 DR-C240 Driver version 1.0.11705.08001 SP2 1.1.11508.3001 SP4 DR-M140 DR-M160II - Canon imageFORMULA DR-C240 | WA10 User Manual - Page 9
Wi-Fi Connection Software To establish a Wi-Fi connection, the WA10 Wireless Connection Tool can be run from the bundled Setup disc. System requirements Supported operating systems: Windows 7 Service Pack 1 or later (32-bit and 64-bit editions) Windows 8.1 (32-bit and 64-bit editions) Windows 10 (32 - Canon imageFORMULA DR-C240 | WA10 User Manual - Page 10
setup disc into the computer's disc drive. On the software setup disc, execute WA10WifiConnectionTool.exe. CAUTION The WA10 Wireless Connection Tool requires that .NET Framework 4.5.2 or higher be installed. You can install it by running NDP452-KB2901907-x86-x64-AllOS-ENU.exe on the disc. Hint - Canon imageFORMULA DR-C240 | WA10 User Manual - Page 11
Enabling the wireless LAN function of the computer To make a Wi-Fi connection, turn on the computer's wireless LAN function. 1 Click the Start button - [Control Panel] - [View network status and tasks]. 3 If the [Wireless Network Connection] icon is [Disabled], double-click the icon. 2 Click [ - Canon imageFORMULA DR-C240 | WA10 User Manual - Page 12
Connecting to a Destination Access Point" (p. 15) Configure the device manually according to your network environment. ➔ See "Specifying and Connecting to Device with One- to-One Connection" (p. 21) IMPORTANT • The scanner can be shared with multiple computers on the same network via the access - Canon imageFORMULA DR-C240 | WA10 User Manual - Page 13
1 If the device is powered on, turn it off. Turning off the scanner also turns off the device. 2 Enable the wireless LAN function of the 3. 3 Run the WA10 Wireless Connection Tool. On the software setup disc, execute WA10WifiConnectionTool.exe (p. 10). 4 Click [Start]. 5 Hold the Wireless On/Off - Canon imageFORMULA DR-C240 | WA10 User Manual - Page 14
6 Click [Next]. 8 Select [Setup by using the computer's wireless settings], and click [Next]. 7 Select the device to configure, and click [Next]. The connection is established. When successfully connected, "Success" is displayed on the result screen. This completes configuration. Hint When normal - Canon imageFORMULA DR-C240 | WA10 User Manual - Page 15
1 If the device is powered on, turn it off. Turning off the scanner also turns off the device. 2 Enable the wireless LAN function of the 3. 3 Run the WA10 Wireless Connection Tool. On the software setup disc, execute WA10WifiConnectionTool.exe (p. 10). 4 Click [Start]. 5 Hold the Wireless On/Off - Canon imageFORMULA DR-C240 | WA10 User Manual - Page 16
6 Click [Next]. 8 Select [Setup by selecting from list], and click [Next]. 7 Select the device to configure, and click [Next]. A list of access points detected by the computer is displayed. 9 From the list, select the access point to connect to, and click [Next]. 16 - Canon imageFORMULA DR-C240 | WA10 User Manual - Page 17
10 Enter the security key for the access point, and click [Next]. The connection is established. When successfully connected, "Success" is displayed on the result screen. - Canon imageFORMULA DR-C240 | WA10 User Manual - Page 18
1 If the device is powered on, turn it off. Turning off the scanner also turns off the device. 2 Enable the wireless LAN function of the 3. 3 Run the WA10 Wireless Connection Tool. On the software setup disc, execute WA10WifiConnectionTool.exe (p. 10). 4 Click [Start]. 5 Hold the Wireless On/Off - Canon imageFORMULA DR-C240 | WA10 User Manual - Page 19
and click [Next]. 8 Select [Others], and click [Next]. A Enter the SSID. B Select the type of security. C Enter the security key. 10 Click [Next]. The connection is established. When successfully connected, "Success" is displayed on the result screen. This completes configuration. Hint When normal - Canon imageFORMULA DR-C240 | WA10 User Manual - Page 20
turning the device on to start it up in AP mode. Turning on the scanner also turns on the device. Hold the Wireless On/Off button until the Connection the access point to activate the connection-waiting state. See the instructions for your access point. CAUTION This device cannot connect if the - Canon imageFORMULA DR-C240 | WA10 User Manual - Page 21
capability. 1 If the device is powered on, turn it off. Turning off the scanner also turns off the device. 2 Check the SSID of this device. The SSID is turning the device on to start it up in AP mode. Turning on the scanner also turns on the device. Hold the Wireless On/Off button until the - Canon imageFORMULA DR-C240 | WA10 User Manual - Page 22
5 Search for the wireless network, and establish Wi-Fi connection with the device. A Click the icon in the taskbar to display a B Select the SSID from step 2 in the list, then C Enter the security key shown on the label on list of available wireless networks. click [Connect]. the side of the - Canon imageFORMULA DR-C240 | WA10 User Manual - Page 23
performing the following and starting the Driver Setting Tool. Hint This section describes operations for when the DR-M160II is being used. When button 2 Click [All Programs] - [Canon ] - [Driver Setting Tool] in the start menu. Driver Setting Tool starts. 3 Click the [NetworkMonitor - Canon imageFORMULA DR-C240 | WA10 User Manual - Page 24
appears in the list. 5 Select the scanner in your application. Specifying a Static IP Address for the with One-to-One Connection" (p. 21). 2 Start the web browser, and access the "http://192.168.0.10/" URL. The device's web page opens, and the login screen is displayed. 3 Specify the IP address for - Canon imageFORMULA DR-C240 | WA10 User Manual - Page 25
Job Tool from the App Store and install it. • For Android devices, download the CaptureOnTouch Job Tool from Google Play and install it. 2 Connect the WA10 to a Wi-Fi or wired network. For details, see "About Wi-Fi Connections" (p. 10), "Connecting to the Wired Network" (p. 23). CAUTION - Canon imageFORMULA DR-C240 | WA10 User Manual - Page 26
. The [Scan from app job] screen appears. Hint You can change the screen displayed at startup by tapping [ ] and selecting [Initial screen setting]. 2 Select the scanner. A Tap [ ]. B Select the scanner on the [Select Scanner] screen. 26 - Canon imageFORMULA DR-C240 | WA10 User Manual - Page 27
[Shared Folder] is selected, be sure to specify the shared folder in which the scanned data is to be saved. • To scan A3-size documents on the DR-M1060, set [Page Size] to [Detect Page Size]. Hint By clicking [ ], you can send scanned data as an e-mail attachment or save it to - Canon imageFORMULA DR-C240 | WA10 User Manual - Page 28
Editing job settings You can edit the settings of registered jobs. 1 Press and hold the icon of the job you want to edit. [ ] appears to indicate the job is editable. 3 Change the settings in [Job name] and [Scan setting], and tap [SAVE]. The settings are saved. Hint To cancel editing, tap the job - Canon imageFORMULA DR-C240 | WA10 User Manual - Page 29
light of the device blinks blue. It lights steadily blue when scanning and data transmission are completed. CAUTION • If the scanner does not detect the document (there is no document in the feeder) when scanning starts, the Connection lamp lights orange. • If data cannot be sent, such as because of - Canon imageFORMULA DR-C240 | WA10 User Manual - Page 30
. For details, see "Deleting jobs" (p. 28). Hint To delete all jobs copied to the scanner, delete all jobs from the CaptureOnTouch Job Tool. 2 Select the scanner. A Tap [ ]. B Select the scanner on the [Select Scanner] screen. Job Scanning from a PC When there is one or more computer on the same - Canon imageFORMULA DR-C240 | WA10 User Manual - Page 31
CaptureOnTouch favorite on the computer selected in the above figure, the job is registered as shown below. • Only the favorites that are registered to the scanner's job buttons using CaptureOnTouch can be operated from CaptureOnTouch Job Tool. 31 - Canon imageFORMULA DR-C240 | WA10 User Manual - Page 32
copying a job registered in the CaptureOnTouch Job Tool to the scanner, you can then execute the job by pressing the scanner's start button. CAUTION The CaptureOnTouch Job Tool for Windows requires that .NET Framework 4.5.2 or higher be installed. Job Scanning with the App You can register a job in - Canon imageFORMULA DR-C240 | WA10 User Manual - Page 33
• In [Transmission settings] under [Scan setting], be sure to specify the shared folder in which to save the scanned data. • To scan A3-size documents on the DR-M1060, set [Page Size] to [Detect Page Size]. Hint You can register multiple jobs. Up to 99 jobs can be registered. 2 Click [ ]. The [Edit - Canon imageFORMULA DR-C240 | WA10 User Manual - Page 34
3 Change the settings in [Job name] and [Scan setting], and click [Save]. The settings are saved. Deleting all jobs You can delete all registered jobs at once. 1 Click [Delete All]. A confirmation message appears. Deleting jobs You can delete registered jobs. 1 Click the icon of the job you want - Canon imageFORMULA DR-C240 | WA10 User Manual - Page 35
light of the device blinks blue. It lights steadily blue when scanning and data transmission are completed. CAUTION • If the scanner does not detect the document (there is no document in the feeder) when scanning starts, the Connection lamp lights orange. • If data cannot be sent, such as because of - Canon imageFORMULA DR-C240 | WA10 User Manual - Page 36
B Select the scanner on the [Select Scanner] screen. 3 Click [ ], or click [ ] - [Copy job registration settings]. 4 Enter the administrator password. Enter the same password as for of This Device" (p. 37). 5 Click [OK]. Jobs deleted from the CaptureOnTouch Job Tool are deleted from the scanner. 36 - Canon imageFORMULA DR-C240 | WA10 User Manual - Page 37
the following instructions, Internet Explorer 11 and Windows 7 are DR-M160II is being used. When using a different model, replace any instance of the model name with that of the model you are using. 1 Click [All Programs] - [Canon ] - [Driver Setting Tool] in the start menu. Driver - Canon imageFORMULA DR-C240 | WA10 User Manual - Page 38
the scanner from the list, and click [Property]. The device's web page opens, and the login screen is displayed. Specifying the Device's IP Address to Display the Web Menu Enter the device's IP address in the address bar of the web browser, and press the Enter key. Example: Enter 192.168.0.10 - Canon imageFORMULA DR-C240 | WA10 User Manual - Page 39
setting items on each of the pages of the web menu. Scanner Name Setting If you click [Scanner Name Setting] on the left menu, the page below is displayed by dots and expressed in the [xxx.xxx.xxx.xxx] format. 192.168.0.10 Subnet Mask Set the subnet mask of the device. If DHCP is enabled, the - Canon imageFORMULA DR-C240 | WA10 User Manual - Page 40
allows scanning applications to search for and automatically connect to this device and its connected scanner. Enable the setting under normal ON circumstances. When the setting is disabled, you must manually specify the scanner using the device's IP address to scan from a scanning application. 40 - Canon imageFORMULA DR-C240 | WA10 User Manual - Page 41
restored, and the device restarts. Update the device's firmware. Click [Version up], and then specify the firmware file in the screen that appears. Visit the Canon support page for instructions on out to obtain the firmware. http://www.canon-elec.co.jp/products/ims/softwareDownload/ index.html 41 - Canon imageFORMULA DR-C240 | WA10 User Manual - Page 42
that is licensed under GNU GENERAL PUBLIC LICENSE (GPL), GNU LESSER GENERAL PUBLIC LICENSE (LGPL), or proprietary licenses. You can view the original text of a software license via the device's web menu. 1 Follow the steps in "Displaying the Web Menu of This Device" (p. 37), and display the [Device - Canon imageFORMULA DR-C240 | WA10 User Manual - Page 43
Troubleshooting Hint See the instructions for the access point you are using. Item Cannot scan. Interface Wired LAN/Wi-Fi Wired LAN/Wi-Fi The scanner does not appear in the list on the scanner selection screen. Wired LAN Wi-Fi The scanner software of the installed scanner driver is compatible - Canon imageFORMULA DR-C240 | WA10 User Manual - Page 44
WA10 Wireless Connection Tool, attempting to operate the scanner produces an error. The scanner is not detected after setup with the WA10 Wireless environment supports DHCP, consult your network administrator. If your network environment does not support DHCP, configure the IP address manually. • - Canon imageFORMULA DR-C240 | WA10 User Manual - Page 45
lb) (main body only) Power supply AC adapter (use the adapter supplied with the scanner) Power consumption Max. during operation: 7.0 W; During standby: 4.5 W; During power off: 0.1 W or less Operating environment Temperature: 10 to 35 degrees C (50 to 95 degrees F) Humidity: 20 to 85% (RH - Canon imageFORMULA DR-C240 | WA10 User Manual - Page 46
- Canon imageFORMULA DR-C240 | WA10 User Manual - Page 47
- Canon imageFORMULA DR-C240 | WA10 User Manual - Page 48
Safety-related markings on the machine Marquages de sécurité sur la machine Marcature di sicurezza sulla macchina Sicherheitshinweise auf der Maschine Marcas de la máquina relacionadas con la seguridad Veiligheidsmarkeringen op de machine Makine üzerindeki güvenlik iġaretleri [English] [Français] [ - Canon imageFORMULA DR-C240 | WA10 User Manual - Page 49
-Off) Commutateur (Appuyer pour mettre en marche/Appuyer pour arrêter) Interruttore a pulsante bistabile (On/Off) Schalter (Ein- und Ausschalten durch Drücken) Interruptor (pulsado para encendido/apagado) Schakelaar (Push-On/Push-Off) Anahtar (Bas-Aç/Bas-Kapa) Power on/off (no standby current) Sous - Canon imageFORMULA DR-C240 | WA10 User Manual - Page 50
[English] [Français] [Italiano] [Deutsch] [Español] [Nederlands] [Türkçe] DC symbol Indicates direct current Symbole CC Indique qu'il s'agit de courant continu Simbolo corrente continua (C.C.) Indica la corrente continua Gleichstrom-Symbol Kennzeichnet Gleichstrom Símbolo CC Indica - Canon imageFORMULA DR-C240 | WA10 User Manual - Page 51
AUSTRALIA PTY. LTD. BUILDING A, THE PARK ESTATE, 5 TALAVERA ROAD, MACQUARIE PARK, NSW 2113, AUSTRALIA CANON SINGAPORE PTE. LTD. 1 FUSIONOPOLIS PLACE, #15-10, GALAXIS, SINGAPORE 138522 CANON INDIA PVT. LTD 7TH FLOOR, TOWER B DLF CYBER TERRACES DLF PHASE III GURGAON-122002 HARYANA, INDIA PUB. 6T3
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
 |
 |
This manual describes the setup and operating procedures for the
WA10 Network Adapter for the Canon imageFORMULA DR series.
To use this device, read this manual together with the instructions for
the scanner to be connected.
Procedures and Example Screens
This manual describes operations using Windows 7 as examples.
Table of Contents
Safety Precautions
..............................................................
4
About This Device
...............................................................
6
Setup
.....................................................................................
8
About Wi-Fi Connections
..................................................
10
Connecting Using the Wireless Settings
of the Computer
.................................................................
13
Selecting and Connecting to a Destination
Access Point
......................................................................
15
Specifying and Connecting to an Access Point
.............
18
Connecting Using WPS
.....................................................
20
Connecting to Another Device with One-to-One
Connection
.........................................................................
21
Connecting to the Wired Network
....................................
23
Scanning with the CaptureOnTouch Job Tool
from a Smart Device
..........................................................
25
Scanning from a Computer with
the CaptureOnTouch Job Tool
.........................................
32
Using the Web Menu
.........................................................
37
Troubleshooting
................................................................
43
Specifications
....................................................................
45
WA10
User Manual