Canon imageFORMULA DR-G1130 imageFORMULA DR-G1130 / DR-G1100 User Manual
Canon imageFORMULA DR-G1130 Manual
View all Canon imageFORMULA DR-G1130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Canon imageFORMULA DR-G1130 manual content summary:
- Canon imageFORMULA DR-G1130 | imageFORMULA DR-G1130 / DR-G1100 User Manual - Page 1
User Manual Please read this manual before using the scanner. After you finish reading this manual, keep it in a safe place for future reference. - Canon imageFORMULA DR-G1130 | imageFORMULA DR-G1130 / DR-G1100 User Manual - Page 2
Document Scanner: - DR-G1130: Model M111171 - DR-G1100 in accordance with the instructions, may cause harmful manual. If such changes or modifications should be made, you could be required to stop operation of the equipment. Canon U.S.A. Inc. One Canon and dissemination of products with functions that - Canon imageFORMULA DR-G1130 | imageFORMULA DR-G1130 / DR-G1100 User Manual - Page 3
of the Document Scanner. DR-G1130: Model M111171 DR-G1100: Model M111181 Trademarks • Canon and the Canon logo are registered trademarks, of Canon Inc. in the United States and may also be trademarks or registered trademarks in other countries. • imageFORMULA is a trademark of CANON ELECTRONICS INC - Canon imageFORMULA DR-G1130 | imageFORMULA DR-G1130 / DR-G1100 User Manual - Page 4
INTEND TO DISCARD THE ORIGINALS OF SCANNED DOCUMENTS, YOU THE CUSTOMER ARE RESPONSIBLE FOR INSPECTING THE SCANNED IMAGES AND VERIFYING THAT DATA IS INTACT.THE MAXIMUM LIABILITY OF CANON ELECTRONICS INC. UNDER THIS WARRANTY IS LIMITED TO THE PURCHASE PRICE OF THE PRODUCT COVERED BY THE WARRANTY. iii - Canon imageFORMULA DR-G1130 | imageFORMULA DR-G1130 / DR-G1100 User Manual - Page 5
Thank you for purchasing the Canon imageFORMULA DR-G1130/G1100 Document Scanner. Please read this and the following manuals thoroughly before using the scanner to become acquainted with its capabilities and make the most of its many functions. After reading the manuals, store them in a safe place - Canon imageFORMULA DR-G1130 | imageFORMULA DR-G1130 / DR-G1100 User Manual - Page 6
Describes routine cleaning and roller replacement Chapter 6 Practical Examples Describes displayed messages and troubleshooting solutions Chapter 7 Appendix Provides a list of specifications and support information ■ Software Chapter 8 ISIS/TWAIN Driver Settings Describes the settings for - Canon imageFORMULA DR-G1130 | imageFORMULA DR-G1130 / DR-G1100 User Manual - Page 7
User Manual Hardware Please read this manual before using the scanner. After you finish reading this manual, keep it in a safe place for future reference. - Canon imageFORMULA DR-G1130 | imageFORMULA DR-G1130 / DR-G1100 User Manual - Page 8
5-2 Cleaning the Scanner 5-2 Cleaning the Sensors 5-2 Opening and closing the upper unit 5-3 Cleaning the Scanning Glass, Roller, and Pad .... 5-3 Adjusting the Compression 5-5 Auto Power OFF Function 5-6 Power Outlet 5-6 2. Replacing the Transport Rollers 5-7 Roller Replacement Cycle - Canon imageFORMULA DR-G1130 | imageFORMULA DR-G1130 / DR-G1100 User Manual - Page 9
Chapter 6 Practical Examples 1. Messages 6-2 Status Display 6-2 Error Messages 6-3 2. Troubleshooting 6-5 Trouble Categories 6-5 Problem and Solution 6-5 3. Uninstalling the Software 6-9 Chapter 7 Appendix 1. Specifications 7-2 Unit Specifications 7-2 Options 7-3 Consumables 7-3 External - Canon imageFORMULA DR-G1130 | imageFORMULA DR-G1130 / DR-G1100 User Manual - Page 10
Chapter 1 Before You Start Using the Scanner 1. Important Safety Instructions 1-2 Installation Location 1-2 Power 1-2 Moving the Scanner 1-3 Handling 1-3 Disposal 1-5 2. Features 1-6 3. Names and Functions of Parts 1-10 Front View, Feeder Inlet, and Eject Outlet ..........1-10 Rear View 1- - Canon imageFORMULA DR-G1130 | imageFORMULA DR-G1130 / DR-G1100 User Manual - Page 11
Chapter 1 Before You Start Using the Scanner 1. Important Safety Instructions To ensure the safe operation of this scanner, be sure to read the safety warnings and precautions described below. Installation Location The performance of this scanner is affected by the environment in which it is - Canon imageFORMULA DR-G1130 | imageFORMULA DR-G1130 / DR-G1100 User Manual - Page 12
you have any questions regarding the power supply, contact your local authorized Canon dealer or service representative for further information. Moving the Scanner ● The scanner weights about 22.8 kg (50.3 lbs). To lift or move the scanner, always use two people, one on each side. Never attempt to - Canon imageFORMULA DR-G1130 | imageFORMULA DR-G1130 / DR-G1100 User Manual - Page 13
products near the scanner. ■ When cleaning the scanner, turn the power switch OFF and disconnect the power plug from the power supply. ■ Clean the scanner , contact your local authorized Canon dealer or service representative to have the unit serviced. ■ Do not locate the scanner in a humid or dusty - Canon imageFORMULA DR-G1130 | imageFORMULA DR-G1130 / DR-G1100 User Manual - Page 14
injury. Be extra careful of neckties and long hair. If anything becomes caught in the scanner, immediately disconnect the power cord to stop the scanner. ■ Be careful when placing paper in the scanner and when removing jammed paper. It is possible to cut your hand on the edge of a sheet of paper - Canon imageFORMULA DR-G1130 | imageFORMULA DR-G1130 / DR-G1100 User Manual - Page 15
Freely Adjustable Document Guides The left and right document guides can be adjusted so that documents can be positioned to scan either the left or right side. (See "Adjusting the Document Guides" on p. 3-7.) ● User Mode The User Mode functions can be employed to set the scanner for practically any - Canon imageFORMULA DR-G1130 | imageFORMULA DR-G1130 / DR-G1100 User Manual - Page 16
detects a double feed when a page of a different length is fed. Chapter 1 Before You Start Using the Scanner ● Prescan At the start of scanning, this function prescans the first page of a document and pauses so that you can use the first image to adjust the brightness and contrast before resuming - Canon imageFORMULA DR-G1130 | imageFORMULA DR-G1130 / DR-G1100 User Manual - Page 17
Image ● MultiStream The scanner supports MultiStream, which can create three images with different scanning conditions from a single scan pass depending on the intended purpose. However, this function is only available when using software that supports Multi-Stream. Document to be Scanned (150 - Canon imageFORMULA DR-G1130 | imageFORMULA DR-G1130 / DR-G1100 User Manual - Page 18
unclear, this scanner has a function Jam, Double Feed, Skew, or Staple. Options ● Imprinter (Option) As an option, printing can be made on scanned documents. ● Barcode Detection (Option) Barcodes on documents can be detected and decoded by installing the optional barcode module. ● Patchcode Support - Canon imageFORMULA DR-G1130 | imageFORMULA DR-G1130 / DR-G1100 User Manual - Page 19
and functions of the DR-G1130/G1100 parts are shown below. Front View, Feeder Inlet, and Eject Outlet (2) (1) (5) (6) (7) (10) (11) (12) (3) (4) (8) (9) (10) (1) Upper Unit Open when cleaning the rollers or paper jams. (See p. 3-22.) (2) Imprinter Cover Open when replacing the ink cartridge in - Canon imageFORMULA DR-G1130 | imageFORMULA DR-G1130 / DR-G1100 User Manual - Page 20
Rear View (1) (3) (2) Chapter 1 Before You Start Using the Scanner (1) Ventilation Holes (Exhaust Fan) Exhausts heat from inside the scanner. (2) Power Connector Connect the supplied power cord here. (See p. 2-6.) (3) USB Connector (Type B) Connect the supplied USB cable here. (See p. 2-7.) - Canon imageFORMULA DR-G1130 | imageFORMULA DR-G1130 / DR-G1100 User Manual - Page 21
(7) (11) (10) Chapter 1 Before You Start Using the Scanner (1) Display Panel Displays the user mode, job info, messages, Key Feeds and counts the number of document pages. (See p. 4-2.) (8) Separation Off Key Raises the Document Feed Tray for the non-separating (manual) mode. (See p. 3-10.) - Canon imageFORMULA DR-G1130 | imageFORMULA DR-G1130 / DR-G1100 User Manual - Page 22
Chapter 2 Setup 1. Setup Procedures 2-2 2. Installation Requirements 2-3 3. Software Installation 2-4 4. Connecting the Scanner to the Computer ....... 2-6 Interface Connector Locations 2-6 Connecting the Scanner to the Computer 2-6 5. Turning the Power ON 2-8 Turning Off the Power 2-8 - Canon imageFORMULA DR-G1130 | imageFORMULA DR-G1130 / DR-G1100 User Manual - Page 23
following setup procedures to prepare the scanner for use. Step 1: Confirm the installation requirements. (See p. 2-3) Step 2: Install the Software. (See p. 2-4) Step 3: Connect the scanner to the computer. (See p. 2-6) Step 4: Turn the power ON (Scanner recognition). (See p. 2-8) Chapter 2 Setup - Canon imageFORMULA DR-G1130 | imageFORMULA DR-G1130 / DR-G1100 User Manual - Page 24
• Microsoft Windows XP Service Pack 3 or later • Microsoft Windows XP x64 Edition Service Pack 2 or later • Microsoft Windows Vista Service Pack 2 or later application software provider. • Precautions for Use in 64-bit Operating Systems - The scanner driver supplied with this product supports - Canon imageFORMULA DR-G1130 | imageFORMULA DR-G1130 / DR-G1100 User Manual - Page 25
• CapturePerfect 3.1 This is a scanning application that is bundled with the scanner and other Canon DR series scanners. • Scanner Driver This is the scanner driver for this product. IMPORTANT Install the software before connecting the scanner to the computer. • Log on to Windows as an Administrator - Canon imageFORMULA DR-G1130 | imageFORMULA DR-G1130 / DR-G1100 User Manual - Page 26
4. Follow the instructions on the screen to complete installation. Chapter 2 Setup 5. Click [Exit] to finish installing the software. Hint Installation of EMC Cloud Capture Function EMC Captiva Cloud Runtime provides a component that enables the use of web-based applications. Be sure to install - Canon imageFORMULA DR-G1130 | imageFORMULA DR-G1130 / DR-G1100 User Manual - Page 27
as shown below. USB Connector Power Connector IMPORTANT • Use only the supplied power cord. • The scanner and computer should both be turned OFF when making connections. Connecting the Scanner to the Computer To connect to the computer, follow the procedure for the intended connection method - Canon imageFORMULA DR-G1130 | imageFORMULA DR-G1130 / DR-G1100 User Manual - Page 28
3. Use the supplied USB cable to connect the scanner to the computer. Connect the square plug (Type B) of the USB cable to the scanner. Connect the flat plug (Type A) of the USB cable to the computer. Type B Type A Chapter 2 Setup 2-7 - Canon imageFORMULA DR-G1130 | imageFORMULA DR-G1130 / DR-G1100 User Manual - Page 29
it is not operated for 4 hours. To disable this setting, follow the steps in (See "Auto Power OFF Function" on p. 5-6). Power Switch Hint When the scanner is turned on for the first time, the balloon message shown below appears on the Windows task bar. If you wait a while, automatic - Canon imageFORMULA DR-G1130 | imageFORMULA DR-G1130 / DR-G1100 User Manual - Page 30
Operation 1. Documents 3-2 Acceptable Documents 3-2 Long Document Mode Setting 3-3 2. Document Feed and Eject Trays 3-5 Preparing the Document Feed Tray 3-5 Adjusting the Document Guides 3-7 Preparing the Document Eject Tray 3-9 3. Document Feeding Methods 3-10 Selecting the Document Feeding - Canon imageFORMULA DR-G1130 | imageFORMULA DR-G1130 / DR-G1100 User Manual - Page 31
, and weight. Scanning different types of paper at one time may cause the scanner to jam. • Always make sure that the ink on a document is dry before scanning it. Scanning documents with the ink still wet may soil the rollers or scanning glass, cause lines or smudges to appear on images, or dirty - Canon imageFORMULA DR-G1130 | imageFORMULA DR-G1130 / DR-G1100 User Manual - Page 32
Document Mode, feed document pages manually, one after another. Document Feeder Capacity Up to 500 sheets of high grade paper or paper up to 48mm high (max.) IMPORTANT Do not exceed the load limitation mark when placing documents in the Document Feed Tray. It may cause paper jams. Long Document - Canon imageFORMULA DR-G1130 | imageFORMULA DR-G1130 / DR-G1100 User Manual - Page 33
to avoid loading documents at skewed angles. • Paper jam detection may react slowly when scanning long documents, which could result in jammed documents being damaged. Be especially careful to avoid paper jams. • To feed each document page manually when scanning long documents, press the [Separation - Canon imageFORMULA DR-G1130 | imageFORMULA DR-G1130 / DR-G1100 User Manual - Page 34
can be set in advance by the Tray Position in the User Mode setting, which minimizes the time required to start feeding the documents to be placed on the Document Feed Tray. The User Mode is activated. 2. Press the [ ] key five times to display Tray Position. (See p. 4-8.) 3. Confirm your settings - Canon imageFORMULA DR-G1130 | imageFORMULA DR-G1130 / DR-G1100 User Manual - Page 35
Feed Tray moves to the selected height. Hint The positions of the left and right document guides can also be locked independently for off-center loading. (See "Adjusting the Document Guides" on p. 3-7) ■ Document Feeder Tray Extension / Extension Wire Pull out the tray extension as needed for the - Canon imageFORMULA DR-G1130 | imageFORMULA DR-G1130 / DR-G1100 User Manual - Page 36
at the left side of the feeder. 1. Spread the document guides all the way to the left and right. Hint Use the extension wire if the document beyond the edge of the document tray extension. Adjusting the Document Guides The document guides normally extend at equal distances to the left and right - Canon imageFORMULA DR-G1130 | imageFORMULA DR-G1130 / DR-G1100 User Manual - Page 37
that the right document guide is locked (1), and slide the left guide all the way to the left (2). 5. Slide the left document guide to the left edge of your documents. 2. Lock the left document guide (1), and unlock the right document guide (2). (1) (2) 3. Slide the right document guide all the - Canon imageFORMULA DR-G1130 | imageFORMULA DR-G1130 / DR-G1100 User Manual - Page 38
be adjusted to fit the width and length of your documents. ■ Document Guides Slide the document eject guides to fit the width of your documents. The eject position of the document can be checked by feeding a single sheet of the document in Count-Only Mode. (See "Count-Only Mode" on p. 4-2.) ■ Eject - Canon imageFORMULA DR-G1130 | imageFORMULA DR-G1130 / DR-G1100 User Manual - Page 39
, you must insert each document page far enough to be pulled in by the feed roller (because the pickup roller is disabled). Separation Off Key Pickup Feed Roller Roller Retard Roller IMPORTANT • Because pages are not separated by the retard roller during manual feeding, a paper jam will occur if - Canon imageFORMULA DR-G1130 | imageFORMULA DR-G1130 / DR-G1100 User Manual - Page 40
Retard Roller IMPORTANT When the Continuous Manual Feeding Mode is set to ON from the User Mode, make sure to disable it (set to OFF) when finished scanning. Otherwise, normal continuous feeding will be disabled the next time someone uses the scanner. Hint For Manual Feeding, you must feed document - Canon imageFORMULA DR-G1130 | imageFORMULA DR-G1130 / DR-G1100 User Manual - Page 41
4. Press [Enter]. Enter Key The current setting is indicated by blinking square brackets [ ]. 5. Press the [ ] or [ ] key and press [Enter] to accept the selection. 6. Press the Stop key to exit the User Mode. Chapter 3 Basic Operation 3-12 - Canon imageFORMULA DR-G1130 | imageFORMULA DR-G1130 / DR-G1100 User Manual - Page 42
as the CapturePerfect 3.1 software included with the scanner, or directly from the control panel of the DR-G1130/G1100, using the Job Function is a TWAIN-compliant application that is installed along with the ISIS/TWAIN driver. See Chapter 9 "Job Registration Tool Settings" for details. ■ Executing - Canon imageFORMULA DR-G1130 | imageFORMULA DR-G1130 / DR-G1100 User Manual - Page 43
application developed for Canon document scanners. CapturePerfect 3.1 includes scan modes described in this section. Select the desired scan mode from the Scan menu to perform scanning. For more information on CapturePerfect 3.1, refer to the CapturePerfect 3.1 Operation Guide. Chapter 3 Basic - Canon imageFORMULA DR-G1130 | imageFORMULA DR-G1130 / DR-G1100 User Manual - Page 44
scanners. Chapter 3 Basic Operation ■ Using CapturePerfect 3.1 This section describes how to start CapturePerfect 3.1 and scan documents. The procedure for using the Scan Batch to File function is described here as an example. For details, refer to the CapturePerfect 3.1 Operation Guide - Canon imageFORMULA DR-G1130 | imageFORMULA DR-G1130 / DR-G1100 User Manual - Page 45
varies depending on the model you are using) The Properties dialog box for the ISIS driver opens. IMPORTANT If [CANON DR-XXXX] is not displayed in the list of scanners, you must re-install the ISIS/TWAIN driver. 4. Select the default page size and click [OK]. IMPORTANT If you select [Default] in - Canon imageFORMULA DR-G1130 | imageFORMULA DR-G1130 / DR-G1100 User Manual - Page 46
3.1 Operation Guide. 10. Place your document and click [Save] to start scanning. IMPORTANT You must load your documents as described Manual Feeding] is selected, once you have started scanning, each document placed in the Document Feed Tray is scanned, and when no document is loaded, the scanner - Canon imageFORMULA DR-G1130 | imageFORMULA DR-G1130 / DR-G1100 User Manual - Page 47
11. Verify that a document is loaded and click either [Continue Scanning] or [Stop Scanning]. 12. When scanning is complete, select [Exit] from the [File] menu to quit CapturePerfect 3.1. Chapter 3 Basic Operation 3-18 - Canon imageFORMULA DR-G1130 | imageFORMULA DR-G1130 / DR-G1100 User Manual - Page 48
5. Using Patchcode Sheets (Option) When the optional patchcode decoder is installed, the DR-G1130/G1100 supports Automatic File Separation by detecting patchcode sheets inserted within a document, and performs batch separation. About Patchcode Sheets Patchcode patterns are printed on the - Canon imageFORMULA DR-G1130 | imageFORMULA DR-G1130 / DR-G1100 User Manual - Page 49
T When the scanner recognizes this patchcode printed on a patchcode sheet, it creates a separate file for the document that comes after the of the document that you want to save as a separate file before placing the documents on the scanner. Insert patchcode sheets in front of the documents you want - Canon imageFORMULA DR-G1130 | imageFORMULA DR-G1130 / DR-G1100 User Manual - Page 50
IMPORTANT If the patchcode decoder is not installed, the [Patchcode] batch separation setting is not displayed. 4. Perform [Scan Batch to File]. 5. Set the [Type of batch separation] setting to [Scan, Continue Scanning] or [Skip, Continue Scanning]. Hint • If [Scan, Continue Scanning] is selected or - Canon imageFORMULA DR-G1130 | imageFORMULA DR-G1130 / DR-G1100 User Manual - Page 51
could be damaged or you could be injured by paper cuts. • Remove documents that remain inside the scanner completely. Paper shreds remaining inside the scanner may cause future jams or damage. 1. Remove any documents that remain in the eject tray. 2. Open the upper unit gently. (See "Opening - Canon imageFORMULA DR-G1130 | imageFORMULA DR-G1130 / DR-G1100 User Manual - Page 52
staples that were detected in documents. Place the document removed from inside the scanner in front of the other documents in the feed tray, and messages appear according to the Rapid Recovery System setting in the ISIS/TWAIN driver. (See "[Rapid Recovery System] Check Box" on p. 8-6.) Start Key - Canon imageFORMULA DR-G1130 | imageFORMULA DR-G1130 / DR-G1100 User Manual - Page 53
the doublefed pages. 2. Select a process with the [ ] and [ ] keys and press [Enter]. [Start]: The image when a double feed is detected is cancelled and the document rescanned. [Stop]: Images scanned before double feed detection are saved in files and scanning is finished. [DFR]: The images of - Canon imageFORMULA DR-G1130 | imageFORMULA DR-G1130 / DR-G1100 User Manual - Page 54
Chapter 4 Other Functions 1. Function Description 4-2 2. User Mode 4-4 User Mode Operating Procedure 4-4 3. User Mode Functions 4-6 - Canon imageFORMULA DR-G1130 | imageFORMULA DR-G1130 / DR-G1100 User Manual - Page 55
The Count Only key lights blue when the Count-Only mode is enabled. ■ Verify Scan The scanner compares the document page count obtained from the Count-Only mode (or entered manually) with the actual count of document pages scanned, and an error message is displayed if the two counts do not match - Canon imageFORMULA DR-G1130 | imageFORMULA DR-G1130 / DR-G1100 User Manual - Page 56
3. Press the Start Key to start scanning. "Verifying..." is displayed. Hint If the specified count is exceeded while scanning, or if the scanned count does not reach the specified count when scanning is finished, an error is displayed. The specified count is exceeded while scanning Scanning finishes - Canon imageFORMULA DR-G1130 | imageFORMULA DR-G1130 / DR-G1100 User Manual - Page 57
2. User Mode The User Mode provides the user with the capability to change certain scanner functions. User Mode Operating Procedure User Mode operations are controlled by the following procedure. Hint Operating procedures differ according to User Mode function. For details, - Canon imageFORMULA DR-G1130 | imageFORMULA DR-G1130 / DR-G1100 User Manual - Page 58
3. Press [Enter]. Enter Key The current setting is indicated with blinking square brackets [ ]. 4. Press the [ ] or [ ] key to select [ON2], [ON1] or [OFF], and press [Enter] to accept the selection. 5. Press the [Stop] key to exit the User Mode. Chapter 4 Other Functions 4-5 - Canon imageFORMULA DR-G1130 | imageFORMULA DR-G1130 / DR-G1100 User Manual - Page 59
or a paper jam occurs, change to Separation Mode. HI: Use if friction between sheets is great, and you are feeding documents that are difficult the length of documents and detecting unevenness between documents by ultrasonic sensors, which can be set according to the ISIS/TWAIN driver. (See p. - Canon imageFORMULA DR-G1130 | imageFORMULA DR-G1130 / DR-G1100 User Manual - Page 60
longer than maximum detectable page size for Auto Detection causes paper jams, and transport stops. ■ Continuous Manual Feeding Mode Setting This mode disables automatic feeding by the pickup roller, so that the loaded document stack must be fed by hand one sheet at a time by the operator. (See - Canon imageFORMULA DR-G1130 | imageFORMULA DR-G1130 / DR-G1100 User Manual - Page 61
Up to 100 sheets ■ Key Repeat Setting Displays the number of document pages fed since roller installation or replacement (pickup, feed, and retard rollers). Make sure to reset this counter when replacing the rollers. (See "Checking and Resetting the Page Counter" on p. 5-7.) ■ Imprinter Test When - Canon imageFORMULA DR-G1130 | imageFORMULA DR-G1130 / DR-G1100 User Manual - Page 62
5-2 Cleaning the Scanner 5-2 Cleaning the Sensors 5-2 Opening and closing the upper unit 5-3 Cleaning the Scanning Glass, Roller, and Pad .....5-3 Adjusting the Compression 5-5 Auto Power OFF Function 5-6 Power Outlet 5-6 2. Replacing the Transport Rollers 5-7 Roller Replacement Cycle - Canon imageFORMULA DR-G1130 | imageFORMULA DR-G1130 / DR-G1100 User Manual - Page 63
. Wring out the cloth thoroughly, and use a clean dry cloth to wipe the scanner dry. ■ Cleaning the Document Feed Inlet and Transport Path Dust or paper particles in the document feed inlet or inside the scanner can cause spots to appear on scanned images. Use compressed air to periodically clean - Canon imageFORMULA DR-G1130 | imageFORMULA DR-G1130 / DR-G1100 User Manual - Page 64
find a scratch on the scanning glass, contact your local authorized Canon dealer or service representative to have the glass replaced. 1. Turn the power switch off, and disconnect the power plug from the power outlet. 2. Close the document eject tray extension if it is open. 3. Open the upper unit - Canon imageFORMULA DR-G1130 | imageFORMULA DR-G1130 / DR-G1100 User Manual - Page 65
lenses. Scanning Glass Chapter 5 Maintenance 6. Remove the pickup roller, feed roller, retard roller, and retard roller cover. (See "Removing and Reinstalling the Rollers" on p. 5-9.) IMPORTANT Remove the pickup roller, feed roller, and retard roller before wiping away the dirt. The pad is mounted - Canon imageFORMULA DR-G1130 | imageFORMULA DR-G1130 / DR-G1100 User Manual - Page 66
Unit" on p. 5-3.) IMPORTANT If paper jams or double feeds still occur frequently even after cleaning the rollers, roller replacement may be necessary. Contact your service representatives or Canon dealers. Adjusting the Compression If the roller mounted inside the scanner is worn, the scan images - Canon imageFORMULA DR-G1130 | imageFORMULA DR-G1130 / DR-G1100 User Manual - Page 67
the auto power OFF function is ON, the power supply automatically turns OFF after four hours have elapsed without a scan or other operation with the scanner. The auto power OFF function can be set using user mode. (See "User Mode" on p. 4-4.) Power Outlet If you leave the power plug connected to - Canon imageFORMULA DR-G1130 | imageFORMULA DR-G1130 / DR-G1100 User Manual - Page 68
Replacement Kit The Roller Replacement Kit consists of replacement pickup, feed, and retard rollers. For details, contact your local authorized Canon dealer or service representative. Product Name: Roller Replacement Kit Product Code: 8262B001 Pickup Roller IMPORTANT • When the roller replacement - Canon imageFORMULA DR-G1130 | imageFORMULA DR-G1130 / DR-G1100 User Manual - Page 69
key twice to display [Roller Counter]. 3. Check the number of pages fed by the rollers, and press [Enter]. imageFORMULA Utility 1. Start Windows, and login as a user with administrator privileges. 2. Click the "Start" button, and then select [All programs], [Canon DR-XXXX], and [Canon imageFORMULA - Canon imageFORMULA DR-G1130 | imageFORMULA DR-G1130 / DR-G1100 User Manual - Page 70
The imageFORMULA utility will start. 3. Click [Canon DR-XXXX USB], and then click "Properties". (XXXX depends on the model in use.) The scanner properties will be displayed. 4. Click [Reset]. Chapter 5 Maintenance Removing and Reinstalling the Rollers Follow the procedure shown below to remove and - Canon imageFORMULA DR-G1130 | imageFORMULA DR-G1130 / DR-G1100 User Manual - Page 71
when released. 4. Remove the pickup roller, and set a clean pickup roller or a replacement pickup roller. IMPORTANT Failure to firmly close the roller holder and roller cover may cause a feed error. Always be sure to check that the roller holder and roller cover are closed. 6. Smoothly close - Canon imageFORMULA DR-G1130 | imageFORMULA DR-G1130 / DR-G1100 User Manual - Page 72
the feed roller. Chapter 5 Maintenance 3. Pull the roller lock lever down. 6. Place the new feed roller on the pin. 4. Slide the feed roller to the right, and then pull them towards you. 7. Put the feed roller in place (1), and align the notch in the roller's axle with the shaft on the scanner - Canon imageFORMULA DR-G1130 | imageFORMULA DR-G1130 / DR-G1100 User Manual - Page 73
a latching sound and that it is securely returned to its original position. IMPORTANT Failure to firmly close the roller cover may cause a feed error. Always be sure to check that the roller cover is closed. 10. Smoothly close the upper unit. (See "Closing the Upper Unit" on p. 5-3.) 3. Push the - Canon imageFORMULA DR-G1130 | imageFORMULA DR-G1130 / DR-G1100 User Manual - Page 74
the retard roller in place. 9. Smoothly close the upper unit. (See "Closing the Upper Unit" on p. 5-3.) CAUTION Make sure that the hook is completely latched and the retard roller cover is not loose. If the retard roller cover is loose, the Document Feed Tray will catch on it causing the scanner to - Canon imageFORMULA DR-G1130 | imageFORMULA DR-G1130 / DR-G1100 User Manual - Page 75
is no longer able to correctly feed a document and can cause paper jams. If documents no longer feed correctly as frequent double-feed, replace the separation pad. ■ Attaching the separation pad (retard roller cover) 1. Replace the retard roller cover. Detaching and attaching the separation pad - Canon imageFORMULA DR-G1130 | imageFORMULA DR-G1130 / DR-G1100 User Manual - Page 76
■ Replacement parts Product Name: Separation pad Product Code: 8262B002 Chapter 5 Maintenance 5-15 - Canon imageFORMULA DR-G1130 | imageFORMULA DR-G1130 / DR-G1100 User Manual - Page 77
. For details, contact your local authorized Canon dealer or service representative. Product Name: Ink Cartridge (Blue) Product Code: 3693A002 (C6602B) Product Name: Ink Cartridge (Red) Product Code: 3693A003 (C6602R) Product Name: Ink Cartridge (Green) Product Code: 3693A004 (C6602G) 5-16 - Canon imageFORMULA DR-G1130 | imageFORMULA DR-G1130 / DR-G1100 User Manual - Page 78
3. Open the imprinter cover until it makes contact with the eject tray. Chapter 5 Maintenance 6. Peel off the seal covering the nozzles of a new ink cartridge. Hint Perform the steps that follow with the imprinter cover fully open. 4. Pull the lock lever outward (1) to release the ink cartridge - Canon imageFORMULA DR-G1130 | imageFORMULA DR-G1130 / DR-G1100 User Manual - Page 79
correctly with a positioning hole. Always move the carriage to a position where it clicks in. Specifying the Printing Position Manually specify the printing position in the horizontal direction of the document. To do this, move the carriage left or right and align it with one of the 15 positioning - Canon imageFORMULA DR-G1130 | imageFORMULA DR-G1130 / DR-G1100 User Manual - Page 80
of the lock lever with the desired printing position. Chapter 5 Maintenance Cleaning the Imprinter ■ Cleaning the Guide Plate Ink that collects on the guide plate inside the optional imprinter may stain the documents when they are scanned. Clean off the ink with water and a mild detergent on a soft - Canon imageFORMULA DR-G1130 | imageFORMULA DR-G1130 / DR-G1100 User Manual - Page 81
the Menu key on the control panel. Menu Key Imprinter Testing After replacing an ink cartridge or cleaning the print head, perform a test Before performing an Imprinter Test, load a sheet of paper into the Document Feed Tray. ■ Performing an Imprinter Test Use the following procedure to execute - Canon imageFORMULA DR-G1130 | imageFORMULA DR-G1130 / DR-G1100 User Manual - Page 82
The Imprinter Test is enabled. 5. Press the [ ] key to select [OK], and press [Enter]. The test print is executed. IMPORTANT If no paper is loaded for test printing, the imprinter test finishes without printing. 6. Press the [Stop] key to exit the User Mode. Chapter 5 Maintenance 5-21 - Canon imageFORMULA DR-G1130 | imageFORMULA DR-G1130 / DR-G1100 User Manual - Page 83
Chapter 6 Practical Examples 1. Messages 6-2 Status Display 6-2 Error Messages 6-3 2. Troubleshooting 6-5 Trouble Categories 6-5 Problem and Solution 6-5 3. Uninstalling the Software 6-9 - Canon imageFORMULA DR-G1130 | imageFORMULA DR-G1130 / DR-G1100 User Manual - Page 84
: Waiting. Load a document and press the Start key. ■ Ready Status: The scanner is ready to use. ■ Scanning... Status: Scanning is in progress. Status: The scanner is busy processing. Wait until the display changes. ■ Verifying... Status: The scanner is verifying a scan. ■ Replace Roller Status: It - Canon imageFORMULA DR-G1130 | imageFORMULA DR-G1130 / DR-G1100 User Manual - Page 85
: The document is jammed inside the scanner. • P006, P007: The document is jammed near the eject outlet. * P001, P006 can be considered to be due to the document feed speed being too fast or the leading edge of the document not feeding correctly. ■ Call for Service Error Code: Exxx Problem: Internal - Canon imageFORMULA DR-G1130 | imageFORMULA DR-G1130 / DR-G1100 User Manual - Page 86
Tray, and scan again. (See p. 3-23.) ■ Staple Detected Error Code: E021 Problem: An error has occurred with the Document Feed Tray. Solution: Turn the power OFF, and restart the scanner. ■ Count Mismatch Error Code: U001 Problem: The specified count has not yet been reached. Solution: Check the - Canon imageFORMULA DR-G1130 | imageFORMULA DR-G1130 / DR-G1100 User Manual - Page 87
does not solve the problem, consider the following possible causes: Cause Solution The scanner does not support your USB interface. This product is not guaranteed to operate with all types of USB interfaces. Contact your local authorized Canon dealer or service representative for more information - Canon imageFORMULA DR-G1130 | imageFORMULA DR-G1130 / DR-G1100 User Manual - Page 88
paper jams. Check your documents carefully before loading. • Replacement rollers can be purchased as consumables. If performance is not improved after cleaning the rollers, contact your local Canon dealer or service representative to purchase a Roller Replacement Kit, and replace the rollers (pickup - Canon imageFORMULA DR-G1130 | imageFORMULA DR-G1130 / DR-G1100 User Manual - Page 89
or more ISIS/TWAIN driver settings may be incorrect, or your application may not support certain scanner functions. Problem Cause Solution The scanned Removal. Problem Cause Solution The scanned image is skewed. (skew) The document has been fed at an angle. Slide the document guides to fit - Canon imageFORMULA DR-G1130 | imageFORMULA DR-G1130 / DR-G1100 User Manual - Page 90
after you clean the scanning glass and rollers, the scanning glass inside the scanner may be scratched. Contact your local authorized Canon dealer or service representative. Problem Cause Solution The scanned image is abnormal for certain documents. A detection function such as border removal is - Canon imageFORMULA DR-G1130 | imageFORMULA DR-G1130 / DR-G1100 User Manual - Page 91
2. Click [Uninstall a program] ([Add or Remove Programs] for Windows XP). The [Uninstall or change a program] dialog box appears. 3. From the Programs list, select the software you want to remove and then click [Remove]. The delete confirmation screen appears. 4. Click [Yes]. Uninstallation of the - Canon imageFORMULA DR-G1130 | imageFORMULA DR-G1130 / DR-G1100 User Manual - Page 92
Chapter 7 Appendix 1. Specifications 7-2 Unit Specifications 7-2 Options 7-3 Consumables 7-3 External Dimensions 7-4 2. Option Specifications 7-5 Barcode Specifications 7-5 Imprinter Specifications 7-6 3. Index 7-7 - Canon imageFORMULA DR-G1130 | imageFORMULA DR-G1130 / DR-G1100 User Manual - Page 93
scanner Scannable Document Requirements Width: 50.8 mm to 305 mm (2" to 12") Length: 70 mm to 432 mm (2.8" to 17") Weight: Continuous Feeding: 20 g/m2 to 209 g/m2 (5 lb to 56 lb bond) (0.04 mm to 0.25 mm) Manual DR-G1130 100 pages/min. 100 pages/min. 200 pages/min. 200 images/min. DR-G1100 75 - Canon imageFORMULA DR-G1130 | imageFORMULA DR-G1130 / DR-G1100 User Manual - Page 94
, problems, such as paper jams and misfeeds, are more likely to occur. If this happens, replace the rollers and separation pads, regardless of the page count. • For information about the roller replacement kit and separation pads, contact your local authorized Canon dealer or service representative - Canon imageFORMULA DR-G1130 | imageFORMULA DR-G1130 / DR-G1100 User Manual - Page 95
External Dimensions Chapter 7 Appendix 480 mm (18.9") 315 mm (12.4") 390 mm (15.4") 162 mm (6.4") 535 mm (21.1") 600 mm (23.6") 723 mm (28.5") 7-4 - Canon imageFORMULA DR-G1130 | imageFORMULA DR-G1130 / DR-G1100 User Manual - Page 96
8 or 13 Modulus 10, Weight 3 3 to 32 (including Modulus 16, 7 DR Start/Stop characters) 3 to 32 (including Modulus 43 Start/Stop characters) (Standard ASCII 10, Weight 3 Note: EAN, UPC-A and UPC-E add-ons supported ■ Detection Conditions Item Condition Printed Side Front or back (or both, - Canon imageFORMULA DR-G1130 | imageFORMULA DR-G1130 / DR-G1100 User Manual - Page 97
No background or overlapping barcodes Imprinter Specifications Printing Side Front Position Set in the ISIS/TWAIN driver (See p. 8-6) One of 15 positions Printing Content Set in the ISIS/TWAIN driver Imprinter Font Sizes (Dots) 12 × 12 (with no added space between characters) 12 × 8 (with no added - Canon imageFORMULA DR-G1130 | imageFORMULA DR-G1130 / DR-G1100 User Manual - Page 98
1-2 Preface 0-iv Problems and Solutions 6-5 R Replacing Ink Cartridges 5-16 Replacing the Transport Rollers 5-7 replacement cycle 5-7 Roller Replacement Kit 5-7 S Safety Instructions 1-2 Scanner Recognition 2-8 Scanning 3-13 Setup 2-2 Software installing 2-4 uninstalling 6-9 Staple - Canon imageFORMULA DR-G1130 | imageFORMULA DR-G1130 / DR-G1100 User Manual - Page 99
Status Display 6-2 System Requirements 2-3 T Troubleshooting 6-5 trouble categories 6-5 U USB Connection 2-6 USB Connector 2-6 User Mode 4-4 functions 4-6 operating procedure 4-4 V Verify Count 4-2 Verify Scan 4-2 Chapter 7 Appendix 7-8 - Canon imageFORMULA DR-G1130 | imageFORMULA DR-G1130 / DR-G1100 User Manual - Page 100
User Manual Software Please read this manual before using the scanner. After you finish reading this manual, keep it in a safe place for future reference. - Canon imageFORMULA DR-G1130 | imageFORMULA DR-G1130 / DR-G1100 User Manual - Page 101
Table of Contents Chapter 8 ISIS/TWAIN Driver Settings 1. ISIS/TWAIN Driver Settings Dialog Box ...........8-2 Dialog box buttons 8-2 [Basic] Tab Sheet Examples 10-2 Scanning Documents of Unregistered Page Sizes 10-2 Specifying the Scanning Area 10-4 Configuring Scanner Settings According to the - Canon imageFORMULA DR-G1130 | imageFORMULA DR-G1130 / DR-G1100 User Manual - Page 102
Chapter 8 ISIS/TWAIN Driver Settings 1. ISIS/TWAIN Driver Settings Dialog Box .......... 8-2 Dialog box buttons 8-2 [Basic] Tab Sheet 8-2 [Brightness] Tab Sheet 8-4 [Image processing] Tab Sheet 8-4 [Feeding] Tab Sheet 8-5 [Others] Tab Sheet 8-6 [Imprinter/Addon Dialog] Tab Sheet 8-6 - Canon imageFORMULA DR-G1130 | imageFORMULA DR-G1130 / DR-G1100 User Manual - Page 103
may be set using unique application windows depending on applications which have compatibility with ISIS. If opening the scanner drivers using the application, the settings for the functions supplied by the scanner drivers other than the scan conditions will be displayed in the [basic] tab. 8-2 - Canon imageFORMULA DR-G1130 | imageFORMULA DR-G1130 / DR-G1100 User Manual - Page 104
or [24-bit Color]. Page Size Select the page size of the document to be scanned. Chapter 8 ISIS/TWAIN Driver Settings - Documents containing pages of different sizes - When using the Long Document mode (See "Long Document Mode Setting" on p. 3-3.) • When [Match original size] is selected, the area - Canon imageFORMULA DR-G1130 | imageFORMULA DR-G1130 / DR-G1100 User Manual - Page 105
ISIS/TWAIN Driver Settings • Select [Folio] to fold the document in two before sheet. For examples of "Image processing" tab use, (See "Configuring Scanner Settings According to the Purpose" on p. 10-5). Hint • If all manual enclosed with the monitor for the gamma values for the monitor used. 8-4 - Canon imageFORMULA DR-G1130 | imageFORMULA DR-G1130 / DR-G1100 User Manual - Page 106
document is stapled at two or more corners. - The document is size smaller than STMT/A5. - The position of the left or right document guide has been changed, and the document has been shifted to the left or right side. (See "Adjusting the Document Guides" on p. 3-7.) - When feeding document manually - Canon imageFORMULA DR-G1130 | imageFORMULA DR-G1130 / DR-G1100 User Manual - Page 107
sheet allows you to imprint/add any character string or counter on scanned documents. The [Imprinter] check box is enabled only if the optional imprinter unit set in the ISIS driver, so it is not displayed in the TWAIN driver. [Rapid Recovery System] Check Box If a paper jam causes paper transport to - Canon imageFORMULA DR-G1130 | imageFORMULA DR-G1130 / DR-G1100 User Manual - Page 108
Chapter 9 Job Registration Tool Settings 1. Before Use 9-2 Job Function 9-2 Starting the Job Registration Tool 9-2 2. Job Registration Tool 9-3 3. Settings Dialog Boxes 9-4 [New/Editing] Dialog Box 9-4 [Admin] Dialog Box 9-7 - Canon imageFORMULA DR-G1130 | imageFORMULA DR-G1130 / DR-G1100 User Manual - Page 109
starts. Starting the Job Registration Tool Follow the procedure below to start the Job Registration Tool. 1. Click the [Start] button, and then click [All Programs] - [Canon DR-XXXX] - [Job Registration Tool]. (XXXX varies depending on the model you are using) 9-2 - Canon imageFORMULA DR-G1130 | imageFORMULA DR-G1130 / DR-G1100 User Manual - Page 110
Chapter 9 Job Registration Tool Settings 2. Job Registration Tool The Job Registration Tool consists of the main window below and the [New/Editing] and [Admin] dialog boxes. For details on the dialog boxes, see the description of each dialog box. • The items of the [Editing] menu are also displayed - Canon imageFORMULA DR-G1130 | imageFORMULA DR-G1130 / DR-G1100 User Manual - Page 111
Chapter 9 Job Registration Tool Settings 3. Settings Dialog Boxes The settings dialog boxes of the Job Registration Tool include the [New/Editing] dialog box and [Admin] dialog box. For details, see the description of each dialog box. Hint See "About the Job Function" on p. 3-13 for the procedure - Canon imageFORMULA DR-G1130 | imageFORMULA DR-G1130 / DR-G1100 User Manual - Page 112
file name indicating the time of scanning. When scanning multi-page documents, image files are created as follows according to the selected file [OK] button. If the error appears, change the file format or scanner mode. [Setting] Button This button is enabled to display the corresponding setting - Canon imageFORMULA DR-G1130 | imageFORMULA DR-G1130 / DR-G1100 User Manual - Page 113
IMPORTANT The Compression rate setting is enabled when the scanner is set to [256-level Gray] or , file size depends on the content of the scanned document. Language for OCR When the [Apply OCR] check IMPORTANT If your application program does not support the above compression formats, you may be - Canon imageFORMULA DR-G1130 | imageFORMULA DR-G1130 / DR-G1100 User Manual - Page 114
folder exceeds the specified limit. • If a warning message appears, follow the instructions in the message to either continue scanning or change the save destination first. log on to Windows or when multiple scanners are used. [Back Up] Button Writes a backup file (*.reg) of registered job - Canon imageFORMULA DR-G1130 | imageFORMULA DR-G1130 / DR-G1100 User Manual - Page 115
[Restore] Button Restores the job data from a stored backup file (*.reg). Hint If the currently registered job number is the same as that of an existing backup file, the existing backup file is overwritten by the registered job. Chapter 9 Job Registration Tool Settings 9-8 - Canon imageFORMULA DR-G1130 | imageFORMULA DR-G1130 / DR-G1100 User Manual - Page 116
Chapter 10 Practical Examples 1. Practical Examples 10-2 Scanning Documents of Unregistered Page Sizes 10-2 Specifying the Scanning Area 10-4 Configuring Scanner Settings According to the Purpose 10-5 Registering Your Settings 10-10 - Canon imageFORMULA DR-G1130 | imageFORMULA DR-G1130 / DR-G1100 User Manual - Page 117
following settings allows you to scan a document of an unregistered page size. ■ Scanning documents longer than 432 mm (17") (Long Document Mode) When you want to scan a document that is longer than 432 mm (17") , you can enable [Long Document] in the scanner settings and set the page size setting - Canon imageFORMULA DR-G1130 | imageFORMULA DR-G1130 / DR-G1100 User Manual - Page 118
of each side. • Load the document with the crease line on the right document size for Folio Scan is 22" × 34"/A1. • 22" × 34"/A1 document pages should be folded lengthwise and scanned with the following settings: Scanner: Long Document each page manually (The Separation Off key is lit). • Fold - Canon imageFORMULA DR-G1130 | imageFORMULA DR-G1130 / DR-G1100 User Manual - Page 119
are created around the image, adjust the scanning area by setting the margins. Margin (+) Margin (-) Hint • Load the document you want to specify the area of and press the [Preview] button to scan the document and display the preview image in the Area panel. You can then specify the area from the - Canon imageFORMULA DR-G1130 | imageFORMULA DR-G1130 / DR-G1100 User Manual - Page 120
Configuring Scanner Settings According to the Purpose Set the scanning conditions according to the scanning purpose. ■ When you do not want to scan colored lines and characters - Canon imageFORMULA DR-G1130 | imageFORMULA DR-G1130 / DR-G1100 User Manual - Page 121
■ When you want to skip or enhance intermediate colors Select an intermediate color in [Color drop-out] on the [Image processing] tab sheet. Click the [Setting] button to display the Color Settings dialog box, and then you can specify the color range of the intermediate colors to ignore (drop out) - Canon imageFORMULA DR-G1130 | imageFORMULA DR-G1130 / DR-G1100 User Manual - Page 122
for each stream. Chapter 10 Practical Examples ■ When you want to reduce the moire patterns that appear when color photos in magazines and other documents are scanned at low resolutions Setting [Moire Reduction] on the [Image processing] tab sheet allows you to reduce the moire patterns that are - Canon imageFORMULA DR-G1130 | imageFORMULA DR-G1130 / DR-G1100 User Manual - Page 123
Chapter 10 Practical Examples ■ When you want to enhance text that is difficult to read because of factors such as the background of the scanned document Select [Advanced Text Enhancement] as the color mode on the [Basic] tab sheet. The background behind the text is removed or processed so that the - Canon imageFORMULA DR-G1130 | imageFORMULA DR-G1130 / DR-G1100 User Manual - Page 124
the orientation of images to the text when scanning a mixture of pages with different text orientations Select [Text orientation recognition] by the setting of Document Orientation in the [Others] tab sheet. The text orientation on each page is detected, and the scanned image is rotated in 90-degree - Canon imageFORMULA DR-G1130 | imageFORMULA DR-G1130 / DR-G1100 User Manual - Page 125
save the data in units of the document bundles placed in the tray. In this case, set the scanner drivers as described below. Set the [ are disabled. • To use the batch separation function, suitable application software is required. Registering Your Settings You can register the scanning conditions - Canon imageFORMULA DR-G1130 | imageFORMULA DR-G1130 / DR-G1100 User Manual - Page 126
HONGKONG COMPANY LTD. 19TH FLOOR, THE METROPOLIS TOWER, 10 METROPOLIS DRIVE, HUNGHOM, KOWLOON, HONG KONG. CANON KOREA BUSINESS SOLUTIONS INC. 168-12 SAMSEONG-DONG, GANGNAM-GU, SEOUL, KOREA CANON INDIA PVT. LTD 7TH FLOOR, TOWER B DLF CYBER TERRACES DLF PHASE III GURGAON - 122002 HARYANA, INDIA PUB
Please read this manual before using the scanner.
After you finish reading this manual, keep it in a safe place for future reference.
User Manual