Canon imageFORMULA DR-M1060 NA10 User Manual
Canon imageFORMULA DR-M1060 Manual
 |
View all Canon imageFORMULA DR-M1060 manuals
Add to My Manuals
Save this manual to your list of manuals |
Canon imageFORMULA DR-M1060 manual content summary:
- Canon imageFORMULA DR-M1060 | NA10 User Manual - Page 1
the Canon imageFORMULA DR series. To use this device, read this manual together with the instructions for the scanner to be connected. Procedures and Example Screens This manual describes a Computer with the CaptureOnTouch Job Tool 16 Using the Web Menu 21 Troubleshooting 27 Specifications 28 - Canon imageFORMULA DR-M1060 | NA10 User Manual - Page 2
in other countries. ● imageFORMULA is a trademark of CANON ELECTRONICS INC. ● Microsoft DOCUMENTS, YOU THE CUSTOMER ARE RESPONSIBLE FOR INSPECTING THE SCANNED IMAGES AND VERIFYING THAT DATA IS INTACT. THE MAXIMUM LIABILITY OF CANON ELECTRONICS INC. UNDER THIS WARRANTY IS LIMITED TO THE PURCHASE PRICE - Canon imageFORMULA DR-M1060 | NA10 User Manual - Page 3
not installed and used in accordance with the instructions, may cause harmful interference to radio communications. office, waste authority, approved WEEE scheme or your household waste disposal service. For more information regarding return and recycling of WEEE products, please visit www.canon - Canon imageFORMULA DR-M1060 | NA10 User Manual - Page 4
using the USB cable. E Power output connector Use the supplied power relay cable to connect this to the scanner's power connector. F LAN port Connect a network cable that supports RJ-45 (10Base-T, 100Base-TX, 1000Base-T) here. G Power input connector Connect the AC adapter supplied with the - Canon imageFORMULA DR-M1060 | NA10 User Manual - Page 5
installing the driver, visit the Canon support website. http://www.canon-elec.co.jp/products/ims/softwareDownload/ index.html Supported scanners This unit supports the following scanners. Scanner DR-C230 DR-C240 Driver version 1.0.11705.08001 SP2 1.1.11508.3001 SP4 DR-M140 DR-M160II 1.2.11407 - Canon imageFORMULA DR-M1060 | NA10 User Manual - Page 6
cable's connector. You can attach the stand to set the device upright. In addition, placing the scanner on the stand will stabilize the device. Place the scanner here. CAUTION • When connecting the device to a scanner equipped with a fan, maintain a space of at least 10 mm between the device and the - Canon imageFORMULA DR-M1060 | NA10 User Manual - Page 7
describes operations for when the DR-M160II is being used. When using a different model, replace any instance of the model name with that of the model you are using. 1 Click [All Programs] - [Canon ] - [Driver Setting Tool] in the start menu. Driver Setting Tool starts. 2 Click the - Canon imageFORMULA DR-M1060 | NA10 User Manual - Page 8
Specifying a Static IP Address for the Device Perform the following when specification of a static IP address for the device is necessary, such as when the network does not include a DHCP server. 1 Turn on the device while holding the DHCP On/Off button. The power lamp will light. (The other lamps - Canon imageFORMULA DR-M1060 | NA10 User Manual - Page 9
with Scanner Start Button You can copy a job registered in the CaptureOnTouch Job Tool to the scanner, then run that job by pressing the scanner's • For iOS devices, download the CaptureOnTouch Job Tool from the App Store and install it. • For Android devices, download the CaptureOnTouch Job Tool - Canon imageFORMULA DR-M1060 | NA10 User Manual - Page 10
. The [Scan from app job] screen appears. Hint You can change the screen displayed at startup by tapping [ ] and selecting [Initial screen setting]. 2 Select the scanner. A Tap [ ]. B Select the scanner on the [Select Scanner] screen. 10 - Canon imageFORMULA DR-M1060 | NA10 User Manual - Page 11
[Shared Folder] is selected, be sure to specify the shared folder in which the scanned data is to be saved. • To scan A3-size documents on the DR-M1060, set [Page Size] to [Detect Page Size]. Hint By clicking [ ], you can send scanned data as an e-mail attachment or save it to - Canon imageFORMULA DR-M1060 | NA10 User Manual - Page 12
Editing job settings You can edit the settings of registered jobs. 1 Press and hold the icon of the job you want to edit. [ ] appears to indicate the job is editable. 3 Change the settings in [Job name] and [Scan setting], and tap [SAVE]. The settings are saved. Hint To cancel editing, tap the job - Canon imageFORMULA DR-M1060 | NA10 User Manual - Page 13
light of the device blinks blue. It lights steadily blue when scanning and data transmission are completed. CAUTION • If the scanner does not detect the document (there is no document in the feeder) when scanning starts, the Connection lamp lights orange. • If data cannot be sent, such as because of - Canon imageFORMULA DR-M1060 | NA10 User Manual - Page 14
. For details, see "Deleting jobs" (p. 12). Hint To delete all jobs copied to the scanner, delete all jobs from the CaptureOnTouch Job Tool. 2 Select the scanner. A Tap [ ]. B Select the scanner on the [Select Scanner] screen. Job Scanning from a PC When there is one or more computer on the same - Canon imageFORMULA DR-M1060 | NA10 User Manual - Page 15
CaptureOnTouch favorite on the computer selected in the above figure, the job is registered as shown below. • Only the favorites that are registered to the scanner's job buttons using CaptureOnTouch can be operated from CaptureOnTouch Job Tool. 15 - Canon imageFORMULA DR-M1060 | NA10 User Manual - Page 16
scan according to the scan settings of the registered job. Scanning with Scanner Start Button By copying a job registered in the CaptureOnTouch Job Tool to the scanner, you can then execute the job by pressing the scanner's start button. CAUTION The CaptureOnTouch Job Tool for Windows requires that - Canon imageFORMULA DR-M1060 | NA10 User Manual - Page 17
• In [Transmission settings] under [Scan setting], be sure to specify the shared folder in which to save the scanned data. • To scan A3-size documents on the DR-M1060, set [Page Size] to [Detect Page Size]. Hint You can register multiple jobs. Up to 99 jobs can be registered. 2 Click [ ]. The [Edit - Canon imageFORMULA DR-M1060 | NA10 User Manual - Page 18
3 Change the settings in [Job name] and [Scan setting], and click [Save]. The settings are saved. Deleting all jobs You can delete all registered jobs at once. 1 Click [Delete All]. A confirmation message appears. Deleting jobs You can delete registered jobs. 1 Click the icon of the job you want - Canon imageFORMULA DR-M1060 | NA10 User Manual - Page 19
light of the device blinks blue. It lights steadily blue when scanning and data transmission are completed. CAUTION • If the scanner does not detect the document (there is no document in the feeder) when scanning starts, the Connection lamp lights orange. • If data cannot be sent, such as because of - Canon imageFORMULA DR-M1060 | NA10 User Manual - Page 20
B Select the scanner on the [Select Scanner] screen. 3 Click [ ], or click [ ] - [Copy job registration settings]. 4 Enter the administrator password. Enter the same password as for of This Device" (p. 21). 5 Click [OK]. Jobs deleted from the CaptureOnTouch Job Tool are deleted from the scanner. 20 - Canon imageFORMULA DR-M1060 | NA10 User Manual - Page 21
higher • In the following instructions, Internet Explorer 11 and DR-M160II is being used. When using a different model, replace any instance of the model name with that of the model you are using. 1 Click [All Programs] - [Canon ] - [Driver Setting Tool] in the start menu. Driver - Canon imageFORMULA DR-M1060 | NA10 User Manual - Page 22
When you click the items on the left menu, the following pages are displayed. Scanner Name Setting Network Setting mDNS Setting Password Setting Maintenance Setting Displays the scanner name. Configures the network settings. Configures the mDNS settings. Configures the administrator password used - Canon imageFORMULA DR-M1060 | NA10 User Manual - Page 23
Web Menu Settings This section describes the setting items on each of the pages of the web menu. Scanner Name Setting If you click [Scanner Name Setting] on the left menu, the page below is displayed. Network Setting If you click [Network Setting] on the left menu, the page below - Canon imageFORMULA DR-M1060 | NA10 User Manual - Page 24
allows scanning applications to search for and automatically connect to this device and its connected scanner. Enable the setting under normal ON circumstances. When the setting is disabled, you must manually specify the scanner using the device's IP address to scan from a scanning application. 24 - Canon imageFORMULA DR-M1060 | NA10 User Manual - Page 25
restored, and the device restarts. Update the device's firmware. Click [Version up], and then specify the firmware file in the screen that appears. Visit the Canon support page for instructions on out to obtain the firmware. http://www.canon-elec.co.jp/products/ims/softwareDownload/ index.html 25 - Canon imageFORMULA DR-M1060 | NA10 User Manual - Page 26
that is licensed under GNU GENERAL PUBLIC LICENSE (GPL), GNU LESSER GENERAL PUBLIC LICENSE (LGPL), or proprietary licenses. You can view the original text of a software license via the device's web menu. 1 Follow the steps in "Displaying the Web Menu of This Device" (p. 21), and display the [Device - Canon imageFORMULA DR-M1060 | NA10 User Manual - Page 27
scanner driver is compatible with this device Problem 3 Automatic connection to the network is not possible. Solutions If your network environment supports DHCP, consult your network administrator. If your network environment does not support DHCP, configure the IP address manually. Problem - Canon imageFORMULA DR-M1060 | NA10 User Manual - Page 28
H; without cord cover) Mass Approx. 179 g (0.4 lb) (main body only) Power supply AC adapter (use the adapter supplied with the scanner) Power consumption Max. during operation: 5.6 W; During standby: 4.2 W; During power off: 0.1 W or less Operating environment Temperature: 10 to 35 degrees - Canon imageFORMULA DR-M1060 | NA10 User Manual - Page 29
Safety-related markings on the machine Marquages de sécurité sur la machine Marcature di sicurezza sulla macchina Sicherheitshinweise auf der Maschine Marcas de la máquina relacionadas con la seguridad Veiligheidsmarkeringen op de machine Makine üzerindeki güvenlik iġaretleri [English] [Français] [ - Canon imageFORMULA DR-M1060 | NA10 User Manual - Page 30
-Off) Commutateur (Appuyer pour mettre en marche/Appuyer pour arrêter) Interruttore a pulsante bistabile (On/Off) Schalter (Ein- und Ausschalten durch Drücken) Interruptor (pulsado para encendido/apagado) Schakelaar (Push-On/Push-Off) Anahtar (Bas-Aç/Bas-Kapa) Power on/off (no standby current) Sous - Canon imageFORMULA DR-M1060 | NA10 User Manual - Page 31
[English] [Français] [Italiano] [Deutsch] [Español] [Nederlands] [Türkçe] DC symbol Indicates direct current Symbole CC Indique qu'il s'agit de courant continu Simbolo corrente continua (C.C.) Indica la corrente continua Gleichstrom-Symbol Kennzeichnet Gleichstrom Símbolo CC Indica - Canon imageFORMULA DR-M1060 | NA10 User Manual - Page 32
AUSTRALIA PTY. LTD. BUILDING A, THE PARK ESTATE, 5 TALAVERA ROAD, MACQUARIE PARK, NSW 2113, AUSTRALIA CANON SINGAPORE PTE. LTD. 1 FUSIONOPOLIS PLACE, #15-10, GALAXIS, SINGAPORE 138522 CANON INDIA PVT. LTD 7TH FLOOR, TOWER B DLF CYBER TERRACES DLF PHASE III GURGAON-122002 HARYANA, INDIA PUB. 6T3
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
 |
 |
This manual describes the setup and operating procedures for the
NA10 Network Adapter for the Canon imageFORMULA DR series.
To use this device, read this manual together with the instructions for
the scanner to be connected.
Procedures and Example Screens
This manual describes operations using Windows 7 as examples.
Table of Contents
About This Device
...............................................................
4
Setup
.....................................................................................
5
Connecting to the Wired Network
......................................
7
Scanning with the CaptureOnTouch Job Tool
from a Smart Device
............................................................
9
Scanning from a Computer with
the CaptureOnTouch Job Tool
.........................................
16
Using the Web Menu
.........................................................
21
Troubleshooting
................................................................
27
Specifications
....................................................................
28
NA10
User Manual