Canon imageFORMULA DR-M1060 User Guide

Canon imageFORMULA DR-M1060 Manual

Get Canon imageFORMULA DR-M1060 PDF manuals and user guides View all Canon imageFORMULA DR-M1060 manuals
Add to My Manuals
Save this manual to your list of manuals

Canon imageFORMULA DR-M1060 manual content summary:

  • Canon imageFORMULA DR-M1060 | User Guide - Page 1
    User Manual • Please read this manual before operating this scanner. • After you finish reading this manual, store it in a safe place for future reference.
  • Canon imageFORMULA DR-M1060 | User Guide - Page 2
    model) Document Scanner, Model and used in accordance with the instructions, may cause harmful interference to radio office, waste authority, approved WEEE scheme or your household waste disposal service. For more information regarding return and recycling of WEEE products, please visit www.canon
  • Canon imageFORMULA DR-M1060 | User Guide - Page 3
    of the Document Scanner. DR-M1060: Model M111201 imageFORMULA is a trademark of CANON DOCUMENTS, YOU THE CUSTOMER ARE RESPONSIBLE FOR INSPECTING THE SCANNED IMAGES AND VERIFYING THAT DATA IS INTACT. THE MAXIMUM LIABILITY OF CANON ELECTRONICS INC. UNDER THIS WARRANTY IS LIMITED TO THE PURCHASE PRICE
  • Canon imageFORMULA DR-M1060 | User Guide - Page 4
    you for purchasing the Canon imageFORMULA DR-M1060 Document Scanner. Please read the following manuals carefully and familiarize yourself with the functions of the scanner before use to ensure you sufficiently understand the functions and make the most of the scanner's capabilities. After reading
  • Canon imageFORMULA DR-M1060 | User Guide - Page 5
    are used in this manual to explain procedures, restrictions, handling precautions, and instructions that should be observed for safety. WARNING Indicates a warning concerning operations that may lead to death or injury to persons if not performed correctly. To use the scanner safely, always pay
  • Canon imageFORMULA DR-M1060 | User Guide - Page 6
    56 Common Problems and Solutions 56 Software Troubleshooting 58 Useful tips 59 Clearing Paper Jams, Skewed Documents, Stapled Documents, and Feed Errors 61 Uninstalling the Software 63 Appendix 64 Specifications 64 Replacement Parts 65 Option 65 About the Flatbed Scanner Unit 101
  • Canon imageFORMULA DR-M1060 | User Guide - Page 7
    of December 2019. For the latest software support information, go to the Products page on the Canon website. Other requirements • An ISIS- vary, depending on the specification of the computer and the environment. • The scanner drivers provided with the scanner do not necessarily operate on
  • Canon imageFORMULA DR-M1060 | User Guide - Page 8
    is properly connected to the computer, the (CaptureOnTouch) icon appears on the taskbar as follows. If the taskbar icon appears as , the scanner is not properly connected to the computer. Check the status of the power switch and USB cable. Turning Off the Power Press and hold the
  • Canon imageFORMULA DR-M1060 | User Guide - Page 9
    documents using the straight path, provide adequate space in back of the scanner for scanned document scanner. Do not use the AC adapter provided with the scanner with other products. ● If you have any questions regarding the power supply, contact your local authorized Canon dealer or service
  • Canon imageFORMULA DR-M1060 | User Guide - Page 10
    button to turn it OFF, and disconnect the power plug from the power outlet. Then, contact your local authorized Canon dealer or service representative to have the unit serviced. ● Before moving the scanner, be sure to push the power button to turn it OFF, and disconnect the power plug from the power
  • Canon imageFORMULA DR-M1060 | User Guide - Page 11
    Then, contact your local authorized Canon dealer or service representative to have the unit serviced. ● Do not install the scanner in a humid or dusty location ensure safe operation, follow the instructions of the warning carefully. Disposal When disposing of this scanner, be sure to follow all
  • Canon imageFORMULA DR-M1060 | User Guide - Page 12
    The main features of the DR-M1060 document scanner are described below. ● Highly Efficient Scanning with A3 Compatibility The front-side input/output U-turn path design allows smooth feeding and output of documents. The scanner supports a variety of document sizes, handling documents that are up to
  • Canon imageFORMULA DR-M1060 | User Guide - Page 13
    the operating panel buttons. By default, Job No.1 is assigned to Scanning Shortcut, which allows you to easily scan a document by just following the instructions on the screen. ● Auto Start The scanner is equipped with an auto start function, which enables scanning to be automatically started when
  • Canon imageFORMULA DR-M1060 | User Guide - Page 14
    Raise this to stop the leading edge of ejected documents and prevent them from falling off of the scanner. H Document Eject Tray / Upper Unit Scanned documents are output here. Open this when cleaning the inside of the scanner or replacing rollers. I Operating Panel A range of scanning operations
  • Canon imageFORMULA DR-M1060 | User Guide - Page 15
    together. (See p. 19) L LED Indicator (Orange) This lights during non separation feeding mode. M Document Guides Align the document guides with both edges of the document to ensure that the document feeds straightly. Back View A1 2 B C3 D A Straight Path Tray When using the straight path
  • Canon imageFORMULA DR-M1060 | User Guide - Page 16
    when the upper unit is open. : displayed when a paper jam is detected. : displayed when a double feed is detected while scanning. : displayed when skewed documents, staples, or feed errors are detected. : displayed for other errors. Other Displays When the straight path tray is opened or closed, the
  • Canon imageFORMULA DR-M1060 | User Guide - Page 17
    exceeding 432 mm (17") size are fed one sheet at a time. • Scanning documents before the ink is dry can cause problems with the scanner. Always make sure that the ink on a document is dry before scanning it. • Scanning documents that are written in pencil or similar material may make the rollers and
  • Canon imageFORMULA DR-M1060 | User Guide - Page 18
    tears. There are clips or staples. The surface is coated. Extremely thin document such as semi-transparent thin paper. Documents with excessive paper dust particles. Business Card Size: Width: 50.8 mm to ] check box in the [Feeding] tab on the scanner driver settings screen. (See p. 25) 18
  • Canon imageFORMULA DR-M1060 | User Guide - Page 19
    the Feed and Eject Methods Switch the feed and eject methods based on the type of document you are scanning. The U-turn path is used when the straight path tray at the rear of the scanner is closed, and the straight path is used when it is opened. U-turn path Straight path
  • Canon imageFORMULA DR-M1060 | User Guide - Page 20
    at the rear of the scanner closed (U-turn path). When scanning business cards, plastic cards, or other documents you do not want to document type, see p. 19. Straight path 2 Open the document feed tray. 4 If you are scanning long documents with the U-turn path, extend the document feed support
  • Canon imageFORMULA DR-M1060 | User Guide - Page 21
    ), extend the feed support and eject support extensions. 6 Place the document. 5 Adjust the document guides to fit the width of the document to be scanned. After placing the document, align the document guides with both edges of the document. IMPORTANT • When placing documents into the feed tray
  • Canon imageFORMULA DR-M1060 | User Guide - Page 22
    card. • When scanning cards, clear the [Detect by Ultrasonic] check box in the [Feeding] tab on the scanner driver settings screen. (See p. 25) Placing Folded Documents Folio scanning allows you to scan documents that are larger than A3 and that do not fit in the feeder. To use the function, fold
  • Canon imageFORMULA DR-M1060 | User Guide - Page 23
    432 mm (17"), but you can scan documents up to 3,000 mm (118.1") long by setting the scanner to the Long Document mode. IMPORTANT By selecting the Long Document mode and setting the [Page Size] in the scanner driver settings screen to auto-detection, documents of up to 3,000 mm (118.1") (2,700
  • Canon imageFORMULA DR-M1060 | User Guide - Page 24
    ], [Canon DR-M1060], and [Canon imageFORMULA Utility]. Hint Canon imageFORMULA Utility is registered to the following location in Windows 8.1. 3 Click [CANON DR-M1060 USB] and click [Properties]. Scanner properties are displayed. 4 Click the [Maintenance] tab, and then select a Long Document mode
  • Canon imageFORMULA DR-M1060 | User Guide - Page 25
    whether to save the scanned image after scanning has finished and continue scanning the document (double feed detection ignore function). To use the double feed detection function, you must first open the scanner driver settings screen and enable double feed detection. It is also necessary to set
  • Canon imageFORMULA DR-M1060 | User Guide - Page 26
    to do when a double feed is detected When not using the double feed detection ignore function If a document double feed is detected during scanning, document feeding stops when the double fed documents are ejected. When this happens, the following error code is displayed in the Job No. Indicator of
  • Canon imageFORMULA DR-M1060 | User Guide - Page 27
    that exceeds a fixed angle, thereby preventing damage to the document. This function is useful for documents that are 148 mm (5.9") or larger in width. To use the skew detection function, open the scanner driver settings screen and enable the skew detection function beforehand. Setting procedure
  • Canon imageFORMULA DR-M1060 | User Guide - Page 28
    feed error occurs, thereby preventing damage to the document. The feed error detection function is useful for documents that are 148 mm (5.9") or larger in width. To use the staple detection or feed error detection function, open the scanner driver settings screen and enable the staple detection or
  • Canon imageFORMULA DR-M1060 | User Guide - Page 29
    error code Hint • When [Rapid recovery system] is enabled in the [Others] tab of the scanner driver settings screen, the following screen appears instead of the above message screen. In such cases, place the document again, and then click [Yes] to resume scanning. • When sensors at both sides of
  • Canon imageFORMULA DR-M1060 | User Guide - Page 30
    Scanning methods Scanning with CaptureOnTouch What is CaptureOnTouch? CaptureOnTouch is a scanning application that enables you to scan a document with a simple operation merely by selecting the screen panel. For details about the operations and functions, see the help of CaptureOnTouch. 30
  • Canon imageFORMULA DR-M1060 | User Guide - Page 31
    size will be set to A4 and this cannot be modified. When you scan a document in an ISIS compatible application or TWAIN compatible application (CaptureOnTouch, etc.), open the scanner driver and configure the scanning conditions and other settings. This section describes the configuration and
  • Canon imageFORMULA DR-M1060 | User Guide - Page 32
    scanning conditions. If the scanner driver is opened in such an application, setting items related to the functions provided by the scanner driver other than scanning conditions will the processing method for scanned images. [Feeding] tab Specify scanner operations related to document feeding. 32
  • Canon imageFORMULA DR-M1060 | User Guide - Page 33
    This section provides an overview of the basic setting items that are the minimum requirements when configuring the scanner settings. Confirming Basic Conditions for Scanning When you scan a document, make sure you confirm the [Color mode], [Page Size], [Dots per inch], and [Scanning Side] basic
  • Canon imageFORMULA DR-M1060 | User Guide - Page 34
    in larger file sizes and slower scanning. • When [Detect automatically] is specified, the resolution is detected automatically from the content printed in the document. • The [Moire Reduction] setting in the [Image processing] tab is enabled when the resolution is 300 dpi or lower, while the [Image
  • Canon imageFORMULA DR-M1060 | User Guide - Page 35
    ] is set to [400 dpi], a 400dpi image will be generated from the image scanned at 600 dpi. The scanning speed will be slightly reduced. Scanning Documents of Unregistered Page Sizes You can register a non-standard page size that has not been registered as a page size by naming and registering it as
  • Canon imageFORMULA DR-M1060 | User Guide - Page 36
    to be scanned. Specifying an area Specify the area of the document to be scanned in the Scan Area dialog box, which is opened from the [Area] button on the [Basic] tab. Configuring Scanner Settings According to Purpose Set the scanning conditions according to the scanning purpose. When you want
  • Canon imageFORMULA DR-M1060 | User Guide - Page 37
    When you do not want to scan colored lines and text Specify the color (red, green, blue, all colors) to be ignored (dropped out) in the color drop-out settings on the [Image processing] tab, and that color will be removed from the scanned image. When you want to enhance contours in images Adjust
  • Canon imageFORMULA DR-M1060 | User Guide - Page 38
    text, and if the background is non-uniform, it is processed to enhance text readability. • Advanced Text Enhancement II is suitable for scanning a document with a uniform background color and light text and background. If the background is non-uniform, such as a pattern, the background may not be
  • Canon imageFORMULA DR-M1060 | User Guide - Page 39
    , you can separate a batch at the timing with which each next document is placed and scanned. (Only enabled for applications that support batch separation.) In this case, set the scanner driver as follows. • Set [Feeding Option] on the [Feeding] tab to [Panel-Feeding] or [Automatic Feeding]. When
  • Canon imageFORMULA DR-M1060 | User Guide - Page 40
    then configure the setting items in the following order. A When you want to specify different scanning conditions for the front and back pages of a document, select [Skip Blank Page] or [Both] for [Scanning Side] on the [Basic] tab in advance. B Specify the number of scanning conditions to apply in
  • Canon imageFORMULA DR-M1060 | User Guide - Page 41
    images. When you want to save a scanner driver setting When you finish configuring a setting, click the [Save] button of [User Preference] to save the setting. See Help for details about settings. When you want to remove dots and notches that appear in documents You can remove dots and notches
  • Canon imageFORMULA DR-M1060 | User Guide - Page 42
    Function Restrictions Depending on Mode Setting Some of the setting items in each of the driver tabs are disabled as follows depending on the setting for [Color Mode] on the [Basic] tab. [Brightness] tab [Others] Tab Setting value Contrast Setting value
  • Canon imageFORMULA DR-M1060 | User Guide - Page 43
    Advanced Scanning Methods Using a Patchcode for Scanning DR-M1060 supports batch separation (automatic file separation) functions by using patchcodes. By tucking patchcode sheets supplied with this scanner into a document and scanning it, the scanner can automatically separate files by images of
  • Canon imageFORMULA DR-M1060 | User Guide - Page 44
    do not bend, fold or crease the sheet. 2 Place the documents in the scanner after inserting the patchcode sheet in front of the page that as the original. 5 mm (0.2") Patchcode 5 mm (0.2") 3 Open the scanner driver settings screen and select [Patchcode] in [Batch Separation] on the [Others]
  • Canon imageFORMULA DR-M1060 | User Guide - Page 45
    the cloth. After finishing a large scanning job, turn OFF the scanner and then clean out any paper particles remaining inside the scanner. Cleaning the Sensor Glass and the Rollers If scanned images contain streaks, or if the scanned documents become dirty, the sensor glass or rollers inside the
  • Canon imageFORMULA DR-M1060 | User Guide - Page 46
    3 Use a dry cloth, for example, to remove dust and paper particles from the inside of the scanner. Use compressed air to remove any dust that cannot be removed with the cloth. Scanning Glass CAUTION Do on the sensor glass, contact your local authorized Canon dealer or service representative. 46
  • Canon imageFORMULA DR-M1060 | User Guide - Page 47
    the retard roller and feed roller. (See p. 51, p. 52) IMPORTANT Remove the retard roller and feed roller from the scanner to clean them, and be sure to reattach them to the scanner when cleaning is finished. 8 Reattach the retard roller and feeding roller. (See p. 51, p. 52) 9 Close the upper unit
  • Canon imageFORMULA DR-M1060 | User Guide - Page 48
    document feed tray. Hint Canon imageFORMULA Utility is registered to the following location in Windows 8.1. Adjusting the Reduction Ratio As the rollers installed in the scanner , and then click [All Programs], [Canon DR-M1060], and [Canon imageFORMULA Utility]. imageFORMULA Utility starts. 48
  • Canon imageFORMULA DR-M1060 | User Guide - Page 49
    3 Click [Canon DR-M1060 USB] and click [Properties]. Scanner properties are displayed. 4 Click the [Maintenance] tab and retard roller wear with scanning. If the feed roller and retard roller are worn, documents may not feed correctly and paper jams and double feeds may occur. When more than 250
  • Canon imageFORMULA DR-M1060 | User Guide - Page 50
    that it is completely closed. Hint The location of each of the consumable parts is shown below. Feed Roller (inside the upper unit) 4 Close the document feed tray. Retard roller 50
  • Canon imageFORMULA DR-M1060 | User Guide - Page 51
    Replacing the Retard Roller TEMPERATURE WARNING The inside of the scanner can become very hot after continuous operation. Do not touch the scanning glass and metallic portions of the retard roller directly. Be sure to allow
  • Canon imageFORMULA DR-M1060 | User Guide - Page 52
    6 Press the roller cover to close it. 3 Lower the feed roller toward you while removing it from the left. Replacing the Feed Roller 1 Lift the securing lever for the feed roller forward. 4 Remove the feed roller. 2 Slide the securing lever for the feed roller to the left. 5 Attach the right
  • Canon imageFORMULA DR-M1060 | User Guide - Page 53
    starts. Resetting the counter 1 Start Windows and log in as a user with administrator privileges. 2 Click the Start button, and then click [All Programs], [Canon DR-M1060], and [Canon imageFORMULA Utility]. 3 Click [Canon DR-M1060 USB] and click [Properties]. Scanner properties are displayed. 53
  • Canon imageFORMULA DR-M1060 | User Guide - Page 54
    resets. 5 Click [OK] to close the scanner properties. Auto Power Off Setting The scanner automatically turns off if 4 hours elapse without and then click [All Programs], [Canon DR-M1060], and [Canon imageFORMULA Utility]. Hint Canon imageFORMULA Utility is registered to the following location
  • Canon imageFORMULA DR-M1060 | User Guide - Page 55
    3 Click [Canon DR-M1060 USB] and click [Properties]. Scanner properties are displayed. 4 Click the [Maintenance] tab and then clear the [Turn off automatically after 4 hours] check box. 5 Click [OK] to close the scanner properties. 55
  • Canon imageFORMULA DR-M1060 | User Guide - Page 56
    directly to the computer. Problem 3 Documents feed askew (scanned images are slanted). Solutions (1) Align the document guides to fit the documents as closely as possible, and load the documents so that they feed straightly. (2) Enable [Skew Detection] in the scanner driver settings. (3) If many
  • Canon imageFORMULA DR-M1060 | User Guide - Page 57
    scanner driver's setting screen, a scanning operation will not continue after all of the documents are fed, as the scanner awaits additional documents to be fed. You can finish the operation and send the scanned images to the application by pressing the Stop button on the operating panel. Problem
  • Canon imageFORMULA DR-M1060 | User Guide - Page 58
    This section describes troubleshooting problems and solutions for operating the supplied software (CaptureOnTouch scanner directly to the computer. If scanned image files cannot be opened in an application (1) Scanned images saved as multi-page TIFF files can be opened only by programs that support
  • Canon imageFORMULA DR-M1060 | User Guide - Page 59
    vertically. Specify the size of the card (or [Match original size]) in the scanner settings, and then scan. For details, see p. 22. How do I load and scan documents with mixed sizes? Set [Page Size] to [Match original size] on the scanner driver setting screen, then scan. For details, see p. 34. 59
  • Canon imageFORMULA DR-M1060 | User Guide - Page 60
    or photos? Set [Page Size] to [Match original size] on the scanner driver setting screen, then scan. Alternatively, register the size of the cards or be printed, attached in an e-mail, or shared using various cloud services. • The plug-in can be installed by selecting its checkbox when installing
  • Canon imageFORMULA DR-M1060 | User Guide - Page 61
    , and Feed Errors When paper jams and skewed documents are detected during scanning, the following error codes are displayed in the scanner's display panel and scanning is interrupted. Paper jam error code 2 Raise the OPEN lever, and open the upper unit. Skew, staple, or feed error detection
  • Canon imageFORMULA DR-M1060 | User Guide - Page 62
    . Hint When the [Rapid recovery system] check box is enabled in the scanner driver settings screen, you can resume a scanning operation even if it is interrupted by a paper jam by removing the document and resuming from the document that was being fed when the interruption occurred. As the image of
  • Canon imageFORMULA DR-M1060 | User Guide - Page 63
    Uninstalling the Software If the ISIS/TWAIN driver, CaptureOnTouch is not operating normally, follow the procedure below to uninstall them. Then, re-install the software from the Setup disc. IMPORTANT Log on to
  • Canon imageFORMULA DR-M1060 | User Guide - Page 64
    Appendix Specifications Main Unit Type Desktop sheetfed scanner Scanning Document Size Plain Paper Size Width: 50.8 mm to 300 mm (2" to 11.8") Length: 70 mm to 432 mm (2.8" to 17") (You can scan documents up to 3,000 mm (118.1") long by setting the scanner to the Long Document mode.)
  • Canon imageFORMULA DR-M1060 | User Guide - Page 65
    to and used with a DR scanner. Connecting the unit to this scanner enables you to use this scanner as a flatbed scanner with an automatic document feeder. Flatbed scanner unit 201 (product code:6240Bxxx) A flatbed scanner unit that can be used by connecting to a DR scanner and supports A3 size paper
  • Canon imageFORMULA DR-M1060 | User Guide - Page 66
    memory, CaptureOnTouch cannot be restarted by pressing the start button on Flatbed Scanner Unit after you end CaptureOnTouch. About Setting up the Scanner Driver When functions of this scanner cannot be selected with the Flatbed Scanner Unit settings dialog box, click [Option] in the dialog box to
  • Canon imageFORMULA DR-M1060 | User Guide - Page 67
    15, 26 Documents Card 22 Folded documents, placing 22 Loading Documents 19 Double feed detection 25 F Flatbed scanner unit 102 65 Flatbed scanner unit 201 65 Reset Counter 53 Rollers Cleaning 45 Replacing 49 S Scanner Driver Basic Settings 33 Configuring Settings According to Purpose 36
  • Canon imageFORMULA DR-M1060 | User Guide - Page 68
    Safety-related markings on the machine Marquages de sécurité sur la machine Marcature di sicurezza sulla macchina Sicherheitshinweise auf der Maschine Marcas de la máquina relacionadas con la seguridad Veiligheidsmarkeringen op de machine Makine üzerindeki güvenlik i㶆aretleri [English] [Français] [
  • Canon imageFORMULA DR-M1060 | User Guide - Page 69
    -Off) Commutateur (Appuyer pour mettre en marche/Appuyer pour arrêter) Interruttore a pulsante bistabile (On/Off) Schalter (Ein- und Ausschalten durch Drücken) Interruptor (pulsado para encendido/apagado) Schakelaar (Push-On/Push-Off) Anahtar (Bas-Aç/Bas-Kapa) Power on/off (no standby current) Sous
  • Canon imageFORMULA DR-M1060 | User Guide - Page 70
    [English] [Français] [Italiano] [Deutsch] [Español] [Nederlands] [Türkçe] DC symbol Indicates direct current Symbole CC Indique qu'il s'agit de courant continu Simbolo corrente continua (C.C.) Indica la corrente continua Gleichstrom-Symbol Kennzeichnet Gleichstrom Símbolo CC Indica
  • Canon imageFORMULA DR-M1060 | User Guide - Page 71
    SHIBAKOEN, MINATO-KU, TOKYO 105-0011, JAPAN CANON U.S.A. INC. ONE CANON PARK, MELVILLE, NY 11747, U.S.A. CANON CANADA INC. 8000 Mississauga Road Brampton, Ontario L6Y 5Z7, CANADA CANON EUROPA N.V. BOVENKERKERWEG 59, 1185 XB AMSTELVEEN, THE NETHERLANDS CANON AUSTRALIA PTY. LTD. BUILDING A, THE PARK
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
User Manual
• Please read this manual before operating this
scanner.
• After you finish reading this manual, store it in
a safe place for future reference.