Canon imageFORMULA R10 Setup Guide for

6T3-0114-01

XXXXXXXX

© CANON ELECTRONICS INC. 2020

PRINTED IN JAPAN

More Information

For detailed explanations on the scanner and CaptureOnTouch

Lite, refer to the user manual.

https://software.canon-elec.co.jp/ims/r10/

The user manual can also be displayed by double-clicking the

[manual] icon on the original pop-up screen. See

3

of “How to

Scan”.

Help

Technical support

USA

By internet: www.usa.canon.com/support

By phone: 1-800-423-2366

Canada

By internet: www.canon.ca/support

By phone: 1-800-OK-CANON (652-2666)

When the Software Update Notice

Screen Appears

Click the [Yes] button.

Click

The Web browser appears and downloading of the

update file begins.

Follow the instructions on the screen to

install the update.

Tips

● When scanning a card

Turn the card face up, and insert the card straight into

the card slot.

1

2

Open the built in software

(CaptureOnTouch Lite).

• A pop-up screen will be displayed with the software

icon.

Windows

Click

OS X

Click

• Pressing the scanner start button does not start

CaptureOnTouch Lite.

Raise the document guide.

Load the document.



Turn the document upside down with the back

side facing you, and load it into the feed tray.

3

4

5

How to Scan

Connect the scanner and computer.

Open the feed tray to turn on the

scanner.

1

USB cable

2

Press the release lever

while raising the feed tray

Start button lights up blue and

the

scanner turns on.

Check the included items

Setup Guide



Align the document guides with both edges of

the loaded document.

• Press the document beneath

the tabs of the document guides.

Select the document type and scanned

image storage location.

• Clicking

allows you to change the scan type and

select a location to save your document.

• Clicking [New Document] allows you to add new

settings.

• Clicking [New output] allows you to add new storage

locations.

Click the [SCAN] button.

Click

• When the software is open, you can also start

scanning with pressing the start button on the

scanner.

After confirming the scanned image,

click the [Finish] button.

Click

Tab

6

7

8

If CaptureOnTouch Lite does not start, take the

following measures.

• Disconnect and reconnect the USB cable.

• If the scanner and computer are connected via a

USB hub, remove the USB hub and connect them

directly with a USB cable.

•

Check whether access to USB devices is prohibited

by security software, and allow access if it is

prohibited.

•

In Windows, AutoPlay for USB memory devices

may be off. In that case, open Explorer and run the

[CaptureOnTouch Lite] icon in [Devices and drives].

There is no need to install any software

or scanner driver.

Double-click the [CaptureOnTouch Lite

Launcher] icon.

Canon imageFORMULA R10 Setup Guide for

Canon imageFORMULA R10 Manual

Canon imageFORMULA R10 manual content summary: