Canon imagePROGRAF iPF8300 iPF8300 Basic Guide No.1
Canon imagePROGRAF iPF8300 Manual
 |
View all Canon imagePROGRAF iPF8300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Canon imagePROGRAF iPF8300 manual content summary:
- Canon imagePROGRAF iPF8300 | iPF8300 Basic Guide No.1 - Page 1
Sheets in the Printer 20 Removing Sheets 22 Consumables 23 Replacing Ink Tanks 24 Replacing the Maintenance Cartridge 30 Replacing the Printhead 36 Menu Map 42 Troubleshooting 2 Troubleshooting 2 If Roll Paper Jams 20 If a Sheet Jams 22 If Paper is Soiled 24 If Printing is Faint 26 - Canon imagePROGRAF iPF8300 | iPF8300 Basic Guide No.1 - Page 2
immediately and remove the power plug from the power outlet. Contact the nearest service center. █ Cleaning the Printer • For cleaning, use a cloth dampened in water. Never use flammable solvents such as alcohol, benzene, or thinner. If these substances come into contact with electrical components - Canon imagePROGRAF iPF8300 | iPF8300 Basic Guide No.1 - Page 3
disconnect the power cable from the outlet before cleaning the printer. If the printer is switched on accidentally, moving parts inside the printer may cause personal injuries. █ Printhead, Ink Tanks, and Maintenance Cartridge • Always store consumables in a safe location out of the reach of small - Canon imagePROGRAF iPF8300 | iPF8300 Basic Guide No.1 - Page 4
matches the connection point on the printer. • During printing, turn on the ventilation system in the room. • We recommend ensuring ample space for installation. Trademarks Canon, the Canon logo, and imagePROGRAF are trademarks or registered trademarks of CANON INC. Microsoft and Windows are - Canon imagePROGRAF iPF8300 | iPF8300 Basic Guide No.1 - Page 5
from imagePROGRAF Support Information. • User Manual The User Manual gives detailed operating instructions for the printer, as well as troubleshooting tips in case of printing issues. • Paper Reference Guide The Paper Reference Guide identifies the types of paper you can use with the printer and - Canon imagePROGRAF iPF8300 | iPF8300 Basic Guide No.1 - Page 6
in this document. Printer part names Example: Open the Top Cover. Figures and software screens • Screens depicted in this document for the printer driver or other software may look different from the actual screens because of subsequent updates. • Windows XP screens are used in explanations of - Canon imagePROGRAF iPF8300 | iPF8300 Basic Guide No.1 - Page 7
FCC Regulations (U.S.A) Canon Large Format Printer iPF8300 This device complies with Part 15 of the FCC Rules. Operation . This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference - Canon imagePROGRAF iPF8300 | iPF8300 Basic Guide No.1 - Page 8
m Maintenance Cartridge n Carrying Handles o Maintenance Cartridge Cover p Stand Operation Open this cover to install the Printhead, load paper, and remove any jammed paper from inside the printer as needed. Paper is cut (using the cutter or manually with scissors) over this groove. Guides printed - Canon imagePROGRAF iPF8300 | iPF8300 Basic Guide No.1 - Page 9
moves across the platen to print. Vacuum holes on the platen hold paper in place. For catching ink outside the edges of paper during borderless printing. When cleaning inside the printer under the Top Cover, use this brush to sweep away paper dust on the Platen. Also use the brush to move the - Canon imagePROGRAF iPF8300 | iPF8300 Basic Guide No.1 - Page 10
screen. (→ , Menu Map) Cancels print jobs in progress and ends the ink drying period. Turns the printer on and off. The power button is lit when the printer is on or in Sleep mode. Enables you to check instructions for loading and removing paper or replacing ink tanks or printheads, as well as - Canon imagePROGRAF iPF8300 | iPF8300 Basic Guide No.1 - Page 11
as follows. After the printer starts up, the Tab Paper Menu Plain Paper ISO A2 Roll Parts (Paper tab A tab indicating status and showing menus related to paper. (Ink tab A tab indicating status and showing menus related to ink. (Job tab A tab indicating status and showing menus related to print - Canon imagePROGRAF iPF8300 | iPF8300 Basic Guide No.1 - Page 12
ends of the roll. Misalignment may cause feeding problems. • For details on supported sizes and types of rolls, see "Paper Sizes" or the Paper Reference Guide. (→"Paper Sizes," User Manual), (→"Types of Paper," User Manual) • To view instructions as you attach the Roll Holder, press the Navigate - Canon imagePROGRAF iPF8300 | iPF8300 Basic Guide No.1 - Page 13
with the holes (b) of the Holder Stopper and insert it firmly. No attachment is needed. b a • Using rolls with a 3-inch paper core Holder Stopper Side Align the tips (a) of 3-Inch Paper Core Attachment #2 with the holes (b) of the Holder Stopper and insert it firmly. b a Roll Holder Side - Canon imagePROGRAF iPF8300 | iPF8300 Basic Guide No.1 - Page 14
. • Always load rolls when the printer is on. If the printer is off when you load a roll, the paper may not be advanced correctly when you turn the printer on. • Before loading rolls, make sure the printer is clean inside the Top Cover and around the Ejection Guide. If these areas are dirty, we - Canon imagePROGRAF iPF8300 | iPF8300 Basic Guide No.1 - Page 15
Slot, fully into the slot. ba Loading Rolls in the Printer ab • Be careful not to drop the roll and hurt yourself printing quality. • If the paper is wrinkled or warped, straighten it out before loading it. • For paper that tends to curl, lift the Release Lever and manually pull the roll paper - Canon imagePROGRAF iPF8300 | iPF8300 Basic Guide No.1 - Page 16
in the Printer 6 Lower the Ejection Guide. 7 Holding the edge of the roll paper, lift the Release Lever. 8 Hold the edge of the roll paper as you gently pull it evenly with both hands to the position of the Ejection Guide a (a). Align the right side of the roll paper with the Paper Alignment - Canon imagePROGRAF iPF8300 | iPF8300 Basic Guide No.1 - Page 17
10 Press ▲ or ▼ to select the type of paper, and then press the OK button. • For details on types of paper to select, see the Paper Reference Guide. (→ , Types of Manuals) Loading Rolls in the Printer 17 - Canon imagePROGRAF iPF8300 | iPF8300 Basic Guide No.1 - Page 18
, a barcode is printed on the leading edge of the roll. • Do not remove the roll before the barcode is printed. You will be unable to keep track of the amount of roll paper left. (→"Keeping Track of the Amount of Roll Paper Left," User Manual) 5 Open the Top Cover and lift the Ejection Guide. 18 - Canon imagePROGRAF iPF8300 | iPF8300 Basic Guide No.1 - Page 19
the Roll Holder Slot. a • See the following procedure for instructions on removing the Roll Holder from the roll. (→"Removing Rolls From the Roll Holder," User Manual) 8 Lower the Ejection Guide and close the Top Cover. • To load new paper in the printer at this point, see the following procedure - Canon imagePROGRAF iPF8300 | iPF8300 Basic Guide No.1 - Page 20
and tape it. • Before loading sheets, make sure the printer is clean inside the Top Cover and around the Ejection Guide. If these areas are dirty, we recommend cleaning them in advance. (→ , If Paper is Soiled) • Store unused paper in the original package, away from high temperature, humidity, and - Canon imagePROGRAF iPF8300 | iPF8300 Basic Guide No.1 - Page 21
or ▼ to select the type of paper, and then press the OK button. The printer now starts feeding the paper. • For details on types of paper to select, see the Paper Reference Guide. (→ , Types of Manuals) • When using the Output Stacker, if you will print on large, stiff sheets, we recommend adjusting - Canon imagePROGRAF iPF8300 | iPF8300 Basic Guide No.1 - Page 22
Removing Sheets This section describes how to remove sheets from the printer. 1 On the Tab Selection screen of the Control Panel, press ◄ or ► to select the Paper tab ( ). Ready OK: Paper Menu Plain Paper ISO A2 • If the Tab Selection screen is not displayed, press the Menu button. 2 Press the - Canon imagePROGRAF iPF8300 | iPF8300 Basic Guide No.1 - Page 23
Tank PFI-704Y • M Ink Tank PFI-704M • PM Ink Tank PFI-704PM • R Ink Tank PFI-704R • G Ink Tank PFI-704G • B Ink Tank PFI-704B • PGY Ink Tank PFI-704PGY • GY Ink Tank PFI-704GY • BK Ink Tank PFI-704BK Printhead • Printhead PF-05 Maintenance Cartridge The maintenance cartridge is provided with a shaft - Canon imagePROGRAF iPF8300 | iPF8300 Basic Guide No.1 - Page 24
are supported. (→ , Consumables) Precautions when handling ink tanks Take the following precautions when handling ink tanks. • There may be ink around the ink supply section of ink tanks you removed. Handle ink tanks carefully during replacement. The ink may stain clothing. • We recommend using up - Canon imagePROGRAF iPF8300 | iPF8300 Basic Guide No.1 - Page 25
Tab Selection screen of the Control Panel, press ◄ or ► to select the Ink tab ( ). Printing OK: Ink Menu PCM YMP RGB P G B B G C K M YYK • If the Tab Selection screen is not displayed, press the Menu button. 2 Press the OK button. The Ink Menu is displayed. 3 Press ▲ or ▼ to select Rep - Canon imagePROGRAF iPF8300 | iPF8300 Basic Guide No.1 - Page 26
stopper (a) of the Ink Tank Lock Lever for the color to replace. Lift the Ink Tank Lock Lever until it stops, and then push it down to the front. PM M BK R GG B PM M BK R GG B B a 330 ml tanks PM M BK R GG B PM M BK R GG B B a 700 ml tanks • Push the Ink Tank Lock Lever down - Canon imagePROGRAF iPF8300 | iPF8300 Basic Guide No.1 - Page 27
Open the pouch and remove the Ink Tank. 330 ml tanks 700 ml tanks • Never touch the ink hole or electrical contacts. This may cause stains, damage the Ink Tank, and affect printing quality. • Do not remove and agitate ink tanks that have already been installed in the printer. Ink may leak out. 27 - Canon imagePROGRAF iPF8300 | iPF8300 Basic Guide No.1 - Page 28
not fit in the holder, do not force it into the holder. Make sure the color of the Ink Tank Lock Lever matches the color of the Ink Tank, and check the orientation of the Ink Tank before reloading it. 4 Lift the Ink Tank Lock Lever until it stops, and then push it down until it clicks - Canon imagePROGRAF iPF8300 | iPF8300 Basic Guide No.1 - Page 29
Tank Lock Lever may not be closed completely. Make sure all ink tank lock levers are fully closed. • To close the Ink Tank Cover when no Ink Tank is installed (as when moving the printer), push the release lever (a) as shown while returning the Ink Tank Lock Lever to the original position. PM M BK - Canon imagePROGRAF iPF8300 | iPF8300 Basic Guide No.1 - Page 30
the instructions in "Replace the maintenance cartridge." 䇭䇭Maintenance cartridge full. Replace the maintenance cartridge. • Do not replace the Maintenance Cartridge during initialization immediately after turning on the printer, during Printhead cleaning, or when ink is being absorbed. Ink may - Canon imagePROGRAF iPF8300 | iPF8300 Basic Guide No.1 - Page 31
Replacing the Maintenance Cartridge Access the menu for maintenance cartridge replacement 1 On the Tab Selection screen of the Control Panel, press ◄ or ► to select the Settings/Adj. tab ( ). Printing OK:Setting/Adj. Menu Maint. cart. The level is low • If the Tab Selection screen is not - Canon imagePROGRAF iPF8300 | iPF8300 Basic Guide No.1 - Page 32
removal and storage. If you drop a used Maintenance Cartridge or store it at an angle, ink may leak and cause stains. • The remaining Maintenance Cartridge capacity is recorded on each printer. Do not install a used Maintenance Cartridge in another printer. 3 Open the box, remove the plastic - Canon imagePROGRAF iPF8300 | iPF8300 Basic Guide No.1 - Page 33
. Replacing the Maintenance Cartridge • Always put the used Maintenance Cartridge back in the box and store the box on a flat surface. Otherwise, ink may leak and cause stains. 6 Wipe away any soiling on the Maintenance Cartridge Cover. • Support the Maintenance Cartridge Cover from underneath - Canon imagePROGRAF iPF8300 | iPF8300 Basic Guide No.1 - Page 34
Replacing the Maintenance Cartridge 9 Press the OK button. The printer now initializes the Maintenance Cartridge. Next, replace the Shaft Cleaner. 34 - Canon imagePROGRAF iPF8300 | iPF8300 Basic Guide No.1 - Page 35
it. a 4 Holding the new Shaft Cleaner by the grips (a), attach it to the Carriage. a • Be sure to put the used Shaft Cleaner in the small box before putting it in the larger box with the used Maintenance Cartridge for disposal. 5 Close the Top Cover. The Carriage moves back into position. 35 - Canon imagePROGRAF iPF8300 | iPF8300 Basic Guide No.1 - Page 36
from the printer menu Replace any printheads with poor printing performance. Canon dealer has advised you to replace the Printhead Replace the Printhead as directed. Compatible printheads Use ink around the nozzles of the Printhead you remove. Handle the Printhead carefully during replacement. The ink - Canon imagePROGRAF iPF8300 | iPF8300 Basic Guide No.1 - Page 37
new Ink Tank when ink levels are low. • Your hands may become dirty during Printhead replacement. Use the gloves provided with the new Printhead for replacement. 1 If the roll is not ejected because of the cutting method selected, cut it manually and remove it. (→"Cutting Roll Paper After Printing - Canon imagePROGRAF iPF8300 | iPF8300 Basic Guide No.1 - Page 38
touch the metal contacts of the Carriage. This may damage the printer. 3 If the ventilation duct (a) is dirty, use a damp cloth that you have wrung out completely to wipe it clean. a Move the Carriage out of the way manually if the Carriage is concealing the ventilation duct, and then clean - Canon imagePROGRAF iPF8300 | iPF8300 Basic Guide No.1 - Page 39
completely. 6 Pull up the Printhead Fixer Cover to open it completely. 7 Remove the Printhead and press the OK button. Replacing the Printhead • Dispose of the used Printhead in accordance with local regulations. 39 - Canon imagePROGRAF iPF8300 | iPF8300 Basic Guide No.1 - Page 40
grips (a). Never touch the nozzles (b) or metal contacts (c). This may damage the Printhead and affect printing quality. • Never touch the ink supply section (d). This may cause printing problems. a d c b • If you need to put a Printhead somewhere temporarily before installation, do not keep the - Canon imagePROGRAF iPF8300 | iPF8300 Basic Guide No.1 - Page 41
down toward the front to lock the Printhead in place. Replacing the Printhead 12 Push the Printhead Fixer Lever toward the back of the printer until it clicks. 13 Push the Carriage Cover down toward the front. 14 Close the Top Cover. Ink now fills the system. It takes about 13 minutes for - Canon imagePROGRAF iPF8300 | iPF8300 Basic Guide No.1 - Page 42
when you install the printer driver from the User Software CD-ROM or if you change paper information by using the Media Configuration Tool. *2: For information on the sizes of paper the printer supports, refer to the User Manual. (→"Paper Sizes," User Manual) *3: Available only if ManageRemainRoll - Canon imagePROGRAF iPF8300 | iPF8300 Basic Guide No.1 - Page 43
mm:ss xxxsec. xxxxxxxxsq.mm USB Network HDD (The total amount of ink consumed and ink colors are displayed here.) xxx.xxx ml Set./Adj. Menu Test Print Adjust Printer OK Back Nozzle Check Status Print Interface Print Paper Details Print Job Log Menu Map Head Posi. Adj. Feed Priority OK Back Auto - Canon imagePROGRAF iPF8300 | iPF8300 Basic Guide No.1 - Page 44
*15 Ethernet Driver *15 System Setup Interface Print *15 Return Defaults *15 Sleep Timer Buzzer Contrast Adj. F IPv4 IPv4 Mode Protocol *9 IPv4 Settings *16 DNS Settings *16 IPv6 IPv6 Support IPv6 StlessAddrs *11 DHCPv6 *11 DNS Settings *11*16 NetWare Frame Type *10 Print Service *10 On - Canon imagePROGRAF iPF8300 | iPF8300 Basic Guide No.1 - Page 45
Map c Take-up Reel *17 Prep.MovePrinter *15 Admin. Menu Printer Info OK Back d Date & Time *15 Date Format *15 Language Time Zone *15 Length Unit Detect Mismatch Paper Size Basis Keep Paper Size Rep.P.head Print Nozzle Check CarriageScanWdth Use RemoteUI *15 Reset PaprSetngs *15 Erase HDD Data *15 - Canon imagePROGRAF iPF8300 | iPF8300 Basic Guide No.1 - Page 46
Numerics 2-Inch Paper Core Attachment 12 3-Inch Paper Core Attachment 12 C Consumables 23 F Flange 13 I imagePROGRAF Support Information 5 Ink hole 26 Ink Lamp 25, 29 Ink tab 11, 25 Ink Tank Lock Lever 26, 28 Ink tank replacement 24 J Job tab 11 M Maintenance cartridge replacement 30 - Canon imagePROGRAF iPF8300 | iPF8300 Basic Guide No.1 - Page 47
- Canon imagePROGRAF iPF8300 | iPF8300 Basic Guide No.1 - Page 48
, Middlesex, UB11 1ET United Kingdom Canon (China) Co., Ltd. 15F Jinbao Building No.89 Jinbao Street, Dongcheng District, Beijing 100005, China Canon Australia Pty. Ltd. 1 Thomas Holt Drive, North Ryde, Sydney, N.S.W.2113, Australia QT5-2367-V1 ©CANON INC. 2010 * QT 5 2 3 6 7V1 * Printed in JAPAN
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
 |
 |
1
Printer Operations
Basic Guide
Read this manual before attempting to operate the printer.
Keep this manual in a handy location for future referencing.
Printer Operations
1
This Basic Guide includes three booklets.
Large-Format Printers
2
Troubleshooting
3
Printer Relocation
Printer Driver Installation
ENG
Read this manual
fi
rst.
Safety Precautions
........................................
2
Types of Manuals
.............................................
5
Documentation Conventions
............................
6
Parts
.................................................................
8
Attaching the Roll Holder to Rolls
...................
12
Loading Rolls in the Printer
............................
14
Removing the Roll from the Printer
................
18
Loading Sheets in the Printer
.........................
20
Removing Sheets
...........................................
22
Consumables
..................................................
23
Replacing Ink Tanks
.......................................
24
Replacing the Maintenance Cartridge
............
30
Replacing the Printhead
.................................
36
Menu Map
.......................................................
42
Troubleshooting
................................................
2
If Roll Paper Jams
..........................................
20
If a Sheet Jams
...............................................
22
If Paper is Soiled
............................................
24
If Printing is Faint
............................................
26
If Vertical Lines are Warped or Colors are
Misaligned
..................................................
27
If Banding Occurs
...........................................
29
If Line Length Does Not Match
.......................
31
Error Messages
..............................................
33
Preparing to Transfer the Printer
......................
2
Reinstalling the Printer
.....................................
8
Installing the Printer Driver (Windows)
...........
12
Installing the Printer Driver (Mac OS X)
.........
14
Convenient Printer Driver Features
................
16