Casio AW81 User Guide
Casio AW81 - Mens Manual
 |
UPC - 940356557349
View all Casio AW81 manuals
Add to My Manuals
Save this manual to your list of manuals |
Casio AW81 manual content summary:
- Casio AW81 | User Guide - Page 1
the display. Timekeeping Mode Telememo Mode World Time Mode Press C. Alarm Mode Countdown Timer Stopwatch Mode Hand Setting Mode Mode Timekeeping This watch features separate digital and analog timekeeping. The procedures for setting the digital time and analog time are different. ∑ In the - Casio AW81 | User Guide - Page 2
USER'S GUIDE for the number. 10. Press A to World Time Mode, which you enter by pressing C. Current time for the selected city code World Time The time settings of the Timekeeping Mode and the World Time Mode are independent of each other, so you must make separate settings for each. This watch - Casio AW81 | User Guide - Page 3
USER'S GUIDE 2747 Alarm Operation The alarm sounds at the preset time for about 10 seconds, regardless of the mode the watch is in. In the case of the snooze alarm, the alarm operation is performed a total of seven times, every five minutes, or until you turn the alarm off. • Alarm and Hourly Time
-
1 -
2 -
3
 |
 |
USER’S GUIDE 2747
1
MA0303-A
About This Manual
∑
Button operations are indicated using the letters shown
in the illustration.
∑
Each section of this manual provides you with the
information you need to perform operations in each
mode. Further details and technical information can be
found in the “Reference” section.
General Guide
∑
Press
C
to change from mode to mode. After you perform an operation (except for
B
) in any mode, pressing
C
returns to the Timekeeping Mode.
∑
In any mode, press
B
to illuminate the display.
Timekeeping
This watch features separate digital and analog timekeeping. The procedures for
setting the digital time and analog time are different.
∑
In the Timekeeping Mode, press
A
to toggle the display between the date screen
and the time screen.
Date Screen
Time Screen
Day of week
Month – Day
Hour : Minutes
PM indicator
Minute hand
Hour hand
Seconds
Digital Time and Date
Use the Timekeeping Mode to set and view a digital display of the current time and
date. When setting the digital time, you can also configure settings for summer time
(Daylight Saving time or DST).
To set the digital time and date
1. In the Timekeeping Mode, hold down
A
until the
seconds start to flash, which indicates the setting
screen.
2. Press
C
to move the flashing in the sequence shown
below to select the other settings.
To toggle between 12-hour and 24-hour timekeeping
In the Timekeeping Mode, press
D
to toggle between 12-hour timekeeping (indicated
by
A
or
P
on the display), or 24-hour timekeeping.
∑
With the 12-hour format, the
P
(PM) indicator appears on the display for times in the
range of noon to 11:59 p.m. and the
A
(AM) indicator appears for times in the range
of midnight to 11:59 a.m.
∑
With the 24-hour format, times are displayed in the range of 0:00 to 23:59, without
any indicator.
∑
The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is
applied in all modes.
Digital Time Daylight Saving Time (DST) Setting
Daylight Saving Time (summer time) advances the digital time setting by one hour
from Standard Time. Remember that not all countries or even local areas use Daylight
Saving Time.
To toggle the Timekeeping Mode digital time between DST and Standard Time
1. In the Timekeeping Mode, hold down
A
until the
seconds start to flash, which indicates the setting
screen.
2. Press
C
once to display the DST setting screen.
3. Press
D
to toggle between Daylight Saving Time
(
ON
displayed) and Standard Time (
OFF
displayed).
4. Press
A
to exit the setting screen.
∑
The
DST
indicator appears on the Timekeeping, Alarm,
and Hand Setting Mode to indicate that Daylight Saving
Time is turned on.
Setting the Analog Time
Perform the procedure below when the time indicated by the analog hands does not
match the time of the digital display.
To adjust the analog time
1. In the Timekeeping Mode, press
C
six times to enter
the Hand Setting Mode.
2. Hold down
A
until the current digital time starts to
flash, which indicates the analog setting screen.
3. Press
D
to advance the analog time setting by
20 seconds.
∑
Holding down
D
advances the analog time setting at
high speed.
Press
C
.
Timekeeping Mode
Telememo Mode
World Time Mode
Alarm Mode
Countdown Timer
Mode
Stopwatch Mode
Hand Setting Mode
Press
A
.
DST
Seconds
Day
Hour
Year
Month
Minutes
3. When the setting you want to change is flashing, use
B
and
D
to change it as
described below.
Screen
FA
OFF
P
10:08
CAAD
6-30
To do this:
Reset the seconds to
AA
.
Toggle between Daylight Saving Time (
ON
)
and Standard Time (
OFF
).
Change the hour or minutes.
Change the year.
Change the month or day.
Do this:
Press
D
.
Press
D
.
Use
D
(+) and
B
(–).
4. Press
A
to exit the setting screen.
∑
Resetting the seconds only (without changing the hour, minute, or DST setting)
causes the analog minute hand setting to be adjusted automatically. If you change
the hour, minute, or DST setting, you should also use the procedure under “To
adjust the analog time” to adjust the analog hands accordingly.
∑
See “Digital Time Daylight Saving Time (DST) Setting” for details about the DST
setting.
∑
Resetting the seconds to
AA
while the current count is in the range of 30 to 59
causes the minutes to be increased by 1. In the range of 00 to 29, the seconds are
reset to
AA
without changing the minutes.
∑
The day of the week is automatically displayed in accordance with the date (year,
month, and day) settings.
∑
The year can be set in the range of 2000 to 2099.
∑
The watch’s built-in full automatic calendar makes allowances for different month
lengths and leap years. Once you set the date, there should be no reason to change
it except after you have the watch’s battery replaced.
∑
If you need to advance the analog time a long way, press
D
and
B
at the same
time. This locks the high speed hand movement, so you can release the two
buttons. High-speed hand movement continues until you press any button. It will
also stop automatically after the time advances 12 hours or if an alarm (daily
alarm, Hourly Time Signal, or countdown alarm) starts to sound.
4. Press
A
to exit the setting screen.
∑
To return to the Timekeeping Mode, press
C
.