Casio FC-200V-S-IH User Guide

Casio FC-200V-S-IH Manual

Get Casio FC-200V-S-IH PDF manuals and user guides View all Casio FC-200V-S-IH manuals
Add to My Manuals
Save this manual to your list of manuals

Casio FC-200V-S-IH manual content summary:

  • Casio FC-200V-S-IH | User Guide - Page 1
    E FC-200V FC-100V User's Guide http://world.casio.com/edu_e/ RCA501407-001V03
  • Casio FC-200V-S-IH | User Guide - Page 2
    Important! CASIO COMPUTER CO., LTD. makes no guarantees concerning accuracy of the contents of this manual or their suitability for any commercial purpose or other particular purpose, or concerning the accuracy of calculation results (such as financial calculation simulation results) produced by
  • Casio FC-200V-S-IH | User Guide - Page 3
    About this Manual • This User's Guide covers use and operation of the CASIO FC-200V and FC-100V. Operations apply to both models, except in cases indicated by the text "FC-200V only". • Keycap markings indicate what a key inputs or what function it performs. Example: 1, 2, +, -, A, etc. SHIFT
  • Casio FC-200V-S-IH | User Guide - Page 4
    four arrows, indicating direction, as shown in the illustration nearby. In this User's Guide, cursor key operation is indicated as f, c, d, and e. REPLAY Some examples in this manual start out assuming that the calculator is set to a particular angle unit. This is indicated by the following marks
  • Casio FC-200V-S-IH | User Guide - Page 5
    . Angle Display Digits STAT Is initialized to this: End 365 CI Annual (FC-200V only) Date (FC-200V only) MDY PRF (FC-200V only) Quantity (FC-200V only) Off Deg Norm1 Off • For information about memory, see "Using Calculator Memory" on page E-35. • For information about shortcut keys settings, see
  • Casio FC-200V-S-IH | User Guide - Page 6
    . • Remove the battery if you do not plan to use the calculator for a long time. • Use only the type of battery specified for this calculator in this manual. Disposing of the Calculator • Never dispose of the calculator by burning it. Doing so can cause certain components to suddenly burst, creating
  • Casio FC-200V-S-IH | User Guide - Page 7
    Handling Precautions • Be sure to press the O key before using the calculator for the first time. • Even if the calculator is operating normally, replace the battery at least once every three years (FC-200V) or two years (FC-100V). A dead battery can leak, causing damage to and malfunction of the
  • Casio FC-200V-S-IH | User Guide - Page 8
    with a ballpoint pen or other pointed object. • Use a soft, dry cloth to clean the exterior of the calculator. If the calculator becomes very dirty, wipe it off with a cloth moistened in a weak solution of water and a mild neutral household detergent. Wring out all excess liquid before
  • Casio FC-200V-S-IH | User Guide - Page 9
    this Manual 1 Initializing the Calculator 3 Safety Precautions 4 Handling Precautions 5 Before Using the Calculator 10 kRemoving the Hard Case 10 kTurning Power On and Off 10 kAdjusting Display Contrast 10 kAbout the Display 11 kDisplay Indicators 11 Calculation Modes and Calculator Setup
  • Casio FC-200V-S-IH | User Guide - Page 10
    Financial Calculation 42 kSimple Interest Mode 42 kCompound Interest Mode 44 kCash Flow Mode 50 kAmortization Mode 55 kConversion Mode 59 kCost/Sell/Margin Mode 61 kDay Calculation Mode 64 kDepreciation Mode (FC-200V only 66 kBond Mode (FC-200V only 71 kBreak-Even Mode (FC-200V only 78
  • Casio FC-200V-S-IH | User Guide - Page 11
    kStack Limitations 136 kCalculation Ranges, Number of Digits, and Precision 137 kSpecial Financial Calculation Error Messages .. 139 kError Messages 140 kBefore assuming malfunction of the calculator... 142 Reference 143 kPower Requirements and Battery Replacement 143 Specifications 146 E-9
  • Casio FC-200V-S-IH | User Guide - Page 12
    as shown in the illustration below. k Turning Power On and Off • Press O to turn on the calculator. • Press 1A(OFF) to turn off the calculator. k Adjusting Display Contrast 1. Press s. 2. Use c to select "CONTRAST:EXE", and then press E. This displays the contrast adjustment screen. Use d and
  • Casio FC-200V-S-IH | User Guide - Page 13
    96-dot LCD screen. Example: Input expression { Calculation result Financial Calculation Mode k Display Indicators Sample Display: STAT This indicator is a value stored in independ- ent memory. E-37 STO RCL The calculator is standing by for input of a variable name to assign a value to the
  • Casio FC-200V-S-IH | User Guide - Page 14
    default angle unit is grads. FIX A fixed number of decimal places is in effect. SCI A fixed number of significant digits is in effect. Calculation history memory data is $` available and can be replayed, or there is more data above/below the E-33 current screen. Disp The display currently
  • Casio FC-200V-S-IH | User Guide - Page 15
    n E-59 Cost, selling price, or margin calculations o E-61 Day or date calculations D E-64 Depreciation calculations (FC-200V only) d E-66 Purchase price and annual yield calculations (FC-200V only) b E-71 Break-even point calculations (FC-200V only) B E-78 k Using the Setup Screen
  • Casio FC-200V-S-IH | User Guide - Page 16
    following are the procedures you need to perform to access and use the setup screen using the above operations. Important! FC-200V All of the example procedures presented in this manual use the s key procedure to display the setup screen. To display the setup screen with the s key 1. Press the
  • Casio FC-200V-S-IH | User Guide - Page 17
    of the setup screen depends on what mode you are currently in. 2. Use fc to select the setup item whose setting you want to change. You can also Date Mode Number of days in a year E-16 3 dn Odd period interest calculation E-16 4 Periods/Y Number of payment periods per year E-17 5 Bond Date
  • Casio FC-200V-S-IH | User Guide - Page 18
    2. Press 1(1:Begin) or 2(2:End) to select the setting you want. • You can also use fc to select a setting and then press E. 2 Date Mode: Simple Interest (SMPL) Mode, Day Calculation (DAYS) Mode, Bond (BOND) Mode (FC-200V only) This setting specifies the number of days in a year. 1:360 360 days 2:365
  • Casio FC-200V-S-IH | User Guide - Page 19
    a setting and then press E. 5 Bond Date: Bond (BOND) Mode (FC-200V only) This setting specifies use of either a date (Date) or a number of payments (Term) as the term for bond calculations. 1:Date Date 2:Term Number of payments 1. Use fc to select "Bond Date", and then press E. 2. Press 1(1:Date) or
  • Casio FC-200V-S-IH | User Guide - Page 20
    2. Press 1(1:PRF) or 2(2:r%) to select the setting you want. • You can also use fc to select a setting and then press E. 8 B-Even: Break-Even Point Calculation (BEV) Submode of Break-Even (BEVN) Mode (FC-200V only) This setting specifies use of either sales quantity (Quantity) or sales amount (Sales
  • Casio FC-200V-S-IH | User Guide - Page 21
    to select "Digit Sep.", and then press E. 2. Press 1(1:Superscript), 2(2:Subscript), or 3(3:Off) to select the setting you want. • You can also use fc to select a setting and then press E. 0 Angle: All modes This setting specifies the angle unit used for trigonometric functions. 90° = -π radians
  • Casio FC-200V-S-IH | User Guide - Page 22
    ), or 3(3:Gra) to select the setting you want. • You can also use fc to select a setting and then press E. ! Fix: All modes This setting specifies a fixed number of digits to the right of the decimal place. Calculation results are rounded off to the specified number of digits before being displayed
  • Casio FC-200V-S-IH | User Guide - Page 23
    previous settings made for ! Fix and @ Sci. Norm1: 10-2 > x, x > 1010 Norm2: 10-9 > x, x > 1010 Example: 1 ÷ 200 = 5 × 10-3 (Norm1) = 0.005 (Norm2) 1. Use fc to select "Norm", and then press E. 2. Press 1(Norm1) or 2(Norm2). $ STAT: Statistics (STAT) Mode, Cash Flow (CASH) Mode This setting
  • Casio FC-200V-S-IH | User Guide - Page 24
    screen cannot be used. A Initializing the Setup Screen Settings 1. O19(CLR) 2. "Setup:EXE" (fc), then E. 3. E(Yes) 4. A • To cancel initialization without doing anything, press E(Cancel) instead of E(Yes). • The calculator will automatically enter the COMP Mode after you initialize the setup screen
  • Casio FC-200V-S-IH | User Guide - Page 25
    E key to execute it. The calculator automatically judges the calculation priority sequence for addition, subtraction, multiplication 3'(, x'(, Abs(, Pol(, Rec(, Rnd( Example: sin 30 = z 1. t 2. "sin(" (fc), then E. 3. 30)E • Some commonly used functions can also be input using a direct key operation
  • Casio FC-200V-S-IH | User Guide - Page 26
    or random number: 20 × A, 2 × π, etc. A Final Closed Parenthesis You can omit one or more closed parentheses that come at the end of a calculation, immediately before the E key is pressed. For details, see "Omitting a Final Closed Parenthesis" on page E-29. A Displaying a Long Expression The display
  • Casio FC-200V-S-IH | User Guide - Page 27
    the current expression, the cursor changes shape to I to let you know. If the I cursor appears, terminate the expression at a convenient point and calculate the result. k Correcting an Expression This section explains how to correct an expression as you are inputting it. The procedure you should use
  • Casio FC-200V-S-IH | User Guide - Page 28
    or Function Example: To correct the expression 369 × × 12 so it becomes 369 × 12 Insert Mode: 369**12 dd Y Overwrite Mode: 369**12 ddd Y A Correcting a Calculation Example: To correct cos(60) so it becomes sin(60) Insert Mode: 12(cos)60) dddY 11(sin) Overwrite Mode: 12(cos)60) dddd 11
  • Casio FC-200V-S-IH | User Guide - Page 29
    If an error message (like "Math ERROR" or "Syntax ERROR") appears when you press E, press d or e. This will display the part of the calculation where the error occurred, with the cursor positioned at the error location. You can then make necessary corrections. Example: When you input 14 ÷ 0 × 2 = by
  • Casio FC-200V-S-IH | User Guide - Page 30
    of Decimal Places and Number of Significant Digits You can specify a fixed number of decimal places and significant digits for the calculation result. Example: 1 ÷ 6 = Initial default setting (Norm1) FIX 3 decimal places (Fix3) SCI 3 significant digits (Sci3) • For more information, see "Configuring
  • Casio FC-200V-S-IH | User Guide - Page 31
    ( ) ) immediately preceding operation of the E key at the end of a calculation. Example: (2 + 3) × (4 - 1) = 15 (2+3)* (4-1E k Percent Calculations Example 1: 2% = 0.02 21((%)E Example 2: 150 × 20% = 30 150*20 1((%)E Example 3: To calculate what percentage of 880 is 660. 660/880 1((%)E Example 4: To
  • Casio FC-200V-S-IH | User Guide - Page 32
    Example 5: To discount 3500 by 25%. 35003500* 251((%)E Example 6: To discount the sum of 168, 98, and 734 by 20%. 168+98+ 734E -G*201((%)E Example 7: If 300 grams are added to a test sample originally weighing 500 grams, what is the percentage increase in weight? 300+500 1.(A%) Example 8: What is
  • Casio FC-200V-S-IH | User Guide - Page 33
    Example 9: To calculate the selling price and profit when the purchase price is $480 and the profit rate to the selling price is 25%. 480*25 1.(A%) 480/25 1.(A%) Example 10: To calculate the bargain price and loss when the purchase price is $130 and the loss rate is 4%. 130*y4 1.(A%) 130/y4 1.(A%)
  • Casio FC-200V-S-IH | User Guide - Page 34
    execute them in sequence from left to right when you press E. Example: To create a multi-statement that performs the following two calculations: 3 + 3 and 3 × 3 Insert Mode: 1. 3+3 2. t 3. " : " (fc), then E. 4. 3*3 Disp E "Disp" indicates this is an intermediate result of a multi-statement. E E-32
  • Casio FC-200V-S-IH | User Guide - Page 35
    , and its result. You can use calculation history memory in the COMP Mode (g) only. A Recalling Calculation History Memory Contents Press f to back-step through calculation history memory contents. Calculation history memory shows both calculation expressions and results. Example: 1+1E 2+2E
  • Casio FC-200V-S-IH | User Guide - Page 36
    A Replay Function While a calculation result is on the display, you can press d or e to edit the expression you used for the previous calculation. Example: 4 × 3 + 2.5 = 14.5 4 × 3 - 7.1 = 4.9 4*3+2.5E A d YYYY -7.1E E-34
  • Casio FC-200V-S-IH | User Guide - Page 37
    memory. Variables Six variables named A, B, C, D, X, and Y can be used for storage of individual values. VARS The following are the names of the financial calculation variables: n, I, PV, PMT, FV, P/Y, C/Y, PM1, PM2, Dys. This section uses the COMP Mode (g) to demonstrate how you can use memory
  • Casio FC-200V-S-IH | User Guide - Page 38
    of 3 × 4 by 30 3*4E (Continuing)/30E Pressing / automatically inputs "Ans" command. • With the above procedure, you need to perform the second calculation immediately after the first one. If you need to recall Answer Memory contents after pressing A, press the G key. A Inputting Answer Memory
  • Casio FC-200V-S-IH | User Guide - Page 39
    memory contents Assign a specific value or result of the expression to independent memory 1. 3+5(for example) 2. 1t(STO) 3. "M:"(fc), then E. 4. E(Yes) • You can also store financial calculation value in independent memory. Example: In the SMPL Mode, store the value of SI in independent memory
  • Casio FC-200V-S-IH | User Guide - Page 40
    A key, change the calculation mode, or turn off the calculator. A Calculation Examples Using Independent Memory 53-6m 45*21m(M-) 99/3m Sm(M)E A Clearing Independent Memory 1. 0 2. 1t(STO) 3. "M:"(fc), then E. 4. E(Yes) • This clears independent memory and causes the "M" indicator to disappear from
  • Casio FC-200V-S-IH | User Guide - Page 41
    variable B Sn(A)*So(B)E • You can also assign a financial calculation value to a variable. Example: In the CMPD Mode, assign calculation mode, or turn off the calculator. Example: 9 × 5 6 × + 8 3 = 1.425 1. 9*6+3 2. 1t(STO) 3. "B:" (fc), then E. 4. E(Yes) 5. 5*8 6. 1t(STO) 7. "C:" (fc
  • Casio FC-200V-S-IH | User Guide - Page 42
    variables, and are referred to as such in the section explaining the COMP Mode. A To select an financial calculation variable in the COMP mode 1. Press 1t(VARS). 2. On the menu screen that appears, use fc to move the highlighting to the variable you want to select, and then press E. A Clearing the
  • Casio FC-200V-S-IH | User Guide - Page 43
    the variables. This procedure does not clear VARS memory contents. See "Clearing the Contents of VARS Memories Only" for more information. 1. O19(CLR) 2. "Memory:EXE" (fc), then E. 3. E(Yes) 4. A • To cancel the clear operation without doing anything, press E(Cancel) instead of E(Yes). E-41
  • Casio FC-200V-S-IH | User Guide - Page 44
    Financial Calculation k Simple Interest Mode • The Simple Interest (SMPL) Mode lets you calculate the interest amount and/or under "Configuring Settings" on page E-16. A Basic SMPL Mode Procedure Example 1: To calculate the interest amount (SI), and the simple future value (SFV) 1. Input the values
  • Casio FC-200V-S-IH | User Guide - Page 45
    to select 4 "PV", input 10000, and then press E. 2. Select the value you want to calculate. • For this example, use fc to select "ALL: Solve". 3. Press 9 to perform the calculation. • Pressing the E key returns to the value input screen. • To solve for the items that have "Solve" specified (such as
  • Casio FC-200V-S-IH | User Guide - Page 46
    . Note, however, that SMPL Mode variables are also used by other modes, so performing an input or calculation operation may change the values assigned to them. • Though SMPL Mode variables are financial calculation variables, they are also used by arithmetic and function operations in the COMP Mode
  • Casio FC-200V-S-IH | User Guide - Page 47
    • After specifying the 1 Payment Period (Payment) and inputting values for 7 Number of Annual Payments (P/Y) and 8 Number of Annual Compoundings, you can calculate any one of the following by inputting values for the other four: Number of Compound Periods, Interest Rate, Principal, Payment Amount
  • Casio FC-200V-S-IH | User Guide - Page 48
    "PMT", input -300, and then press E. • Use fc to select 7 "P/Y", input 12, and then press E. • Use fc to select 8 "C/Y", input 12, and then press E. Input Precautions • Before specifying the number of months when there is a partial month, see "Calculating the Number of Months when a Partial Month is
  • Casio FC-200V-S-IH | User Guide - Page 49
    The following example shows how to calculate the number of months (number of days/total days in the month) for the number of compound periods (n) when a partial month is include. Example 1: When the payment period is 16 months and 20 days 1. Use fc to select "n". 2. Input the division operation
  • Casio FC-200V-S-IH | User Guide - Page 50
    , first use Configuring Settings (page E-16) to select either compound interest or simple interest for the dn setting. A CMPD Mode Financial Calculation Variables (VARS) • Variables n, I, PV, PMT, FV, P/Y, and C/Y are used in the CMPD Mode. • The values of CMPD Mode variables are retained
  • Casio FC-200V-S-IH | User Guide - Page 51
    Screen) { I% 100 (P/Y = C/Y = 1) i = C/Y (1 + I % )P/Y -1..... (Other than 100 × [C/Y ] those above) u I% i (effective interest rate) i (effective interest rate) is calculated using Newton's Method. γ × PV + α × PMT + β × FV = 0 To I % from i (effective interest rate) {{ } i × 100
  • Casio FC-200V-S-IH | User Guide - Page 52
    be used keeping the above limitation in mind, or the results should be verified. • When you use f and c to select an item that can be calculated, the "=" changes to "7". You can perform a calculation by inputting the required values for the other items, and then pressing the l key. Performing the
  • Casio FC-200V-S-IH | User Guide - Page 53
    A Entering the CASH Mode • Press C to enter the CASH Mode. Value Input Screen A cash flow diagram like the one shown below helps to visualize the movement of funds. CF2 CF3 CF4 CF5 CF6 CF7 CF1 CF0 With this graph, the initial investment amount is represented by CF0. The cash flow one year later
  • Casio FC-200V-S-IH | User Guide - Page 54
    . • -1000 E(CF1) • 4500 E(CF2) • 5000 E(CF3) • 4000 E(CF4) 2. Press E to return to the value input screen. 3. Select the value you want to calculate. • For this example, use fc to select "NPV: Solve". 4. Press l to perform the calculation. • Pressing the E key returns to the value input screen. E-52
  • Casio FC-200V-S-IH | User Guide - Page 55
    in the STAT Mode. Conversely, values you input while "2-VAR" is selected are cleared when "1-VAR" is selected in the STAT Mode. A CASH Mode Financial Calculation Variables (VARS) • Variable I is used in the CASH Mode. • The value of the CASH Mode variable is retained even if you change to another
  • Casio FC-200V-S-IH | User Guide - Page 56
    • Though I is a financial calculation variable, it is also used by arithmetic and function operations in the COMP Mode. A Calculation Formulas u NPV NPV = CF0 + CF1 (1+ i) + CF2 (1 + i )2 + CF3 (1 + i )3 + ... + CFn (1 + i )n I % i = 100 n: natural number up to 79 u NFV NFV = NPV × (1
  • Casio FC-200V-S-IH | User Guide - Page 57
    k Amortization Mode • The Amortization (AMRT) Mode lets you calculate the principal balance, and the interest portion and principal portion of monthly payments, as well as interest and principal amounts paid to date. BAL : Principal
  • Casio FC-200V-S-IH | User Guide - Page 58
    e 1 payment d 1 PM1 PM2 Last Number of Payments d : Total principal paid from payment PM1 to payment PM2 (ΣPRN) e : Total interest paid from payment PM1 to payment PM2 (ΣINT) A Setting Values No. Display Name 1 Set*1 Payment Period (Payment) Values Used in Examples End Payment PM1 2 PM1 (
  • Casio FC-200V-S-IH | User Guide - Page 59
    be a value that was input or calculated in another mode. *4 Specify 2 fc to select 3 "PM2", input 28, and then press E. • Use fc to select 5 "I", input 2, and then press E. • Use fc to select 6 "PV", input 100000, and then press E. • Use fc to select 7 "PMT", input -920, and then press E. • Use fc
  • Casio FC-200V-S-IH | User Guide - Page 60
    calculate. • For this example, use fc to select "BAL: Solve". 3. Press l to perform the calculation. • Pressing the E key returns to the value input screen. A Other AMRT Mode Calculations Example 2: To calculate select "ΣPRN:Solve". A AMRT Mode Financial Calculation Variables (VARS) • Variables PM1,
  • Casio FC-200V-S-IH | User Guide - Page 61
    is performed after conversion from the nominal interest rate to the effective interest rate, and the result is used for all subsequent calculations. i = I%'÷100 k Conversion Mode • The Conversion (CNVR) Mode lets you convert between the nominal interest rate (APR) and effective interest rate (EFF
  • Casio FC-200V-S-IH | User Guide - Page 62
    rate (I) values from the Setting Values table above. • For this example, use fc to select 1 "n", input 6, and then press E. • Use fc to select 2 "I", input 3, and then press E. 2. Select the value you want to calculate. • For this example, use fc to select "EFF: Solve". 3. Press l to perform the
  • Casio FC-200V-S-IH | User Guide - Page 63
    an effective interest rate (EFF) to a nominal interest rate (APR) • In step 2 of the basic procedure (Example 1), select "APR: Solve". A CNVR Mode Financial Calculation Variables (VARS) • Variables n and I are used in the CNVR Mode. • A value is assigned to I whenever you perform an EFF or APR
  • Casio FC-200V-S-IH | User Guide - Page 64
    (SEL) values from the Setting Values table above. • For this example, use fc to select 1 "CST", input 40, and then press E. • Use fc to select 2 "SEL", input 100, and then press E. 2. Select the value you want to calculate. • For this example, use fc to select 3 "MRG". 3. Press l to perform the
  • Casio FC-200V-S-IH | User Guide - Page 65
    and cost 1. Input the margin (MRG) and cost (CST) values in step 1 of the basic procedure (Example 1). 2. Select 2 "SEL" in step 2. A COST Mode Financial Calculation Variables (VARS) • Variables CST, SEL, and MRG are used in the COST Mode. • These variables are used in the COST Mode only, and their
  • Casio FC-200V-S-IH | User Guide - Page 66
    a starting date, and the date that falls on a specific number of data prior to an ending date. • Starting date (d1) and ending date (d2) calculations are possible within the range of January 1, 1901 through December 31, 2099. A Entering the DAYS Mode • Press D to enter the DAYS Mode. Value Input
  • Casio FC-200V-S-IH | User Guide - Page 67
    to select 1 "Set:", and then press E. • Press 2 to select "365". • Use fc to select 2 "d1", input 11052004, and then press E. • Use fc to select 3 "d2", input 04272005, and then press E. 2. Select the value you want to calculate. • For this example, use fc to select "Dys". 3. Press l to perform the
  • Casio FC-200V-S-IH | User Guide - Page 68
    operation may change the values assigned to them. • Though DAYS Mode variables are financial calculation variables, variable "Dys" can be recalled in the COMP Mode. k Depreciation Mode (FC-200V only) • The Depreciation (DEPR) Mode lets you use any of the four methods for depreciation. SL : Straight
  • Casio FC-200V-S-IH | User Guide - Page 69
    the double declining balance (DDB) method. A Basic DEPR Mode Procedure Example 1: To calculate depreciation using Straight-Line depreciation 1. Input the values for 1, 2, 3, 4, 5, and 6 from the Setting Values table above. • For this example, use fc to select 1 "n", input 6, and then press E. E-67
  • Casio FC-200V-S-IH | User Guide - Page 70
    and then press E. 2. Select the value you want to calculate. • For this example, use fc to select "SL:Solve". 3. Press l to perform the calculation. • Pressing the E key returns to the value input screen. A Other DEPR Mode Calculations Example 2: To use the fixed percent method with a depreciation
  • Casio FC-200V-S-IH | User Guide - Page 71
    . Note, however, that DEPR Mode variables are also used by other modes, so performing an input or calculation operation may change the values assigned to them. • Though DEPR Mode variables are financial calculation variables, they are also used by arithmetic and function operations in the COMP Mode
  • Casio FC-200V-S-IH | User Guide - Page 72
    end of j th year I% : depreciation ratio u Sum-of-the-Year's Digits Method The sum-of-the-year's-digits method calculates depreciation for a given period. Z = n (n +1) 2 n' = n - YR1 12 Z' = (Intg (n' ) +1) (Intg (n' )+2 2 × Frac(n' )) SYD1 = n Z × YR1 12 (PV - FV ) SYDj
  • Casio FC-200V-S-IH | User Guide - Page 73
    depreciation charge for the j th year RDVj : remaining depreciable value at the end of j th year I% : factor k Bond Mode (FC-200V only) • The Bond (BOND) Mode lets you calculate purchase price and annual yield. A Entering the BOND Mode • Press b to enter the BOND Mode. Value Input Screen A Setting
  • Casio FC-200V-S-IH | User Guide - Page 74
    value -97.61645734 8 YLD Annual Yield 4% *1 • You can specify a date (Date) or a number of coupon payments (Term) as the term for bond calculations. See the "Bond Date" setting under "Configuring Settings" (page E-16). • You can specify once a year (Annual) or once every six months (Semi-Annual
  • Casio FC-200V-S-IH | User Guide - Page 75
    specific date (Date) 1. Input the values required for the calculation from the Setting Values table (pages E-71, E-72). fc to select 1 "Set:", and then press E. • Use fc to select "Periods/Y", and then press E. • Press 1 to select "Annual". • Use fc to select 1 "Set:", and then press E. • Use fc
  • Casio FC-200V-S-IH | User Guide - Page 76
    press E. 2. Select the value you want to calculate. • For this example, use fc to select "PRC". 3. Press l to perform the calculation. • Pressing the E key returns to the value input screen. A Other BOND Mode Calculations • Before performing a calculation based on a specific number of payments (Term
  • Casio FC-200V-S-IH | User Guide - Page 77
    replaces input items d1 and d2 with input item n. 2. Use fc to select 4 "n", input 3, and then press E. 3. Input -97.61645734 for PRC, without inputting anything for YLD. 4. In step 2, select "YLD". A BOND Mode Financial Calculation Variables (VARS) • The values of the following BOND Mode variables
  • Casio FC-200V-S-IH | User Guide - Page 78
    A Calculation Formulas D A B Redemption date (d2) Issue date Purchase date (d1) Coupon Payment dates PRC : price per $100 of face value CPN : coupon rate (%) YLD : annual yield (%) A :
  • Casio FC-200V-S-IH | User Guide - Page 79
    using Newton's Method, which produces approximate values whose precision can be affected by various calculation conditions. Because of this, annual yield calculation results produced by this calculator should be used keeping the above limitation in mind, or the results should be verified
  • Casio FC-200V-S-IH | User Guide - Page 80
    Mode (FC-200V only) • The Break-Even (BEVN) Mode has six sub-modes that you can use to perform various break-even point calculations. A Entering Degree of Financial Leverage DCL: Degree of Combined Leverage QTY CONV. (Quantity Conversion): Sales quantity and related values • Use fc to select the
  • Casio FC-200V-S-IH | User Guide - Page 81
    Screen A Setting Values No. Display Name 1 Set*1 2 PRC 3 VCU 4 FC 5 PRF*2 r%*2 6 QBE*3 SBE*3 Profit or Profit Ratio (PRF/Ratio) ,000 40% 10,000 units $1,000,000 *1 • You can configure break-even point calculations to use profit (PRF) or profit ratio (r%). See the "PRF/Ratio" setting under
  • Casio FC-200V-S-IH | User Guide - Page 82
    input 100, and then press E. • Use fc to select 3 "VCU", input 50, and then press E. • Use fc to select 4 "FC", input 100000, and then press E. • Use fc to select 5 "PRF" or "r%", input 0, and then press E. 2. Select the value you want to calculate. • For this example, use fc to select 6 "QBE". E-80
  • Casio FC-200V-S-IH | User Guide - Page 83
    ,000) 1. Select 2(Sales) for "B-Even" and input 400000 for PRF in step 1 of the basic procedure (Example 1). 2. In step 2, select "SBE". Example 5: To calculate the sales quantity (QBE) required to attain a profit ratio target (40%) • Select 2(r%) for "PRF/Ratio" and input 40 for r% in step 1 of the
  • Casio FC-200V-S-IH | User Guide - Page 84
    -mode Financial Calculation Variables (VARS) • Variables PRC, VCU, FC, PRF, r%, QBE, and SBE are used in the BEV sub-mode. • BEV sub-mode variable contents are cleared whenever you change to another mode other than the BEVN Mode sub-modes (BEV, MOS, DOL, DFL, DCL, QTY CONV.). A Calculation Formulas
  • Casio FC-200V-S-IH | User Guide - Page 85
    values from the Setting Values table above. • For this example, use fc to select 1 "SAL", input 1200000, and then press E. • Use fc to select 2 "SBE", input 1000000, and then press E. 2. Select the value you want to calculate. • For this example, use fc to select 3 "MOS". 3. Press l to perform the
  • Casio FC-200V-S-IH | User Guide - Page 86
    substituting the required values. A MOS Sub-mode Financial Calculation Variables (VARS) • Variables SAL, SBE, MOS, DOL, DFL, DCL, QTY CONV.). A Calculation Formula SAL - SBE MOS = SAL SAL : Degree of Operating Leverage (DOL) sub-mode lets you calculate how profit changes relative to a change in the
  • Casio FC-200V-S-IH | User Guide - Page 87
    Select the value you want to calculate. • For this example, use fc to select 4 "DOL". 3. Press l to perform the calculation. A Other DOL Sub-mode Calculations Example 2: To calculate the sales amount (SAL), variable cost (VC), and fixed cost (FC) • Use the basic procedure (Example 1), substituting
  • Casio FC-200V-S-IH | User Guide - Page 88
    DOL Sub-mode Financial Calculation Variables (VARS) • Variables SAL, VC, FC, and DOL are used in the DOL sub-mode. • DOL sub-mode variable contents are cleared whenever you change to another mode other than the BEVN Mode sub-modes (BEV, MOS, DOL, DFL, DCL, QTY CONV.). A Calculation Formula SAL - VC
  • Casio FC-200V-S-IH | User Guide - Page 89
    , use fc to select 3 "DFL". 3. Press l to perform the calculation. A Other DFL Sub-mode Calculations Example 2: To calculate earnings before interest and taxes (EBIT), and interest (ITR) • Use the basic procedure (Example 1), substituting the required values. A DFL Sub-mode Financial Calculation
  • Casio FC-200V-S-IH | User Guide - Page 90
    EIT : Earnings Before Interest and Taxes (EBIT) ITR : Interest DFL : Degree of Financial Leverage k Degree of Combined Leverage Submode (Break-Even Mode 5) • The Degree of Combined Leverage (DCL) sub-mode lets you calculate the degree of operating leverage (percent change in profit due to a change
  • Casio FC-200V-S-IH | User Guide - Page 91
    and interest (ITR) • Use the basic procedure (Example 1), substituting the required values. A DCL Sub-mode Financial Calculation Variables (VARS) • Variables SAL, VC, FC, ITR, and DCL are used in the DCL sub-mode. • DCL sub-mode variable contents are cleared whenever you change to another mode other
  • Casio FC-200V-S-IH | User Guide - Page 92
    after inputting the other two values. • You can also calculate the variable cost, unit variable cost, or sales quantity after inputting the other two values. A Entering the QTY CONV. Sub-mode 1. Press B to enter the Break-Even Mode. 2. Use fc to select "QTY CONV.:EXE". 3. Press E. Value Input Screen
  • Casio FC-200V-S-IH | User Guide - Page 93
    press E. 2. Select the value you want to calculate. • In this example, use fc to select 3 "QTY". 3. Press l to perform the calculation. • The result of a 3 "QTY" (sales quantity) calculation is also assigned to variable 6 "QTY". Example 2: To calculate the sales amount (SAL) and sales price (PRC
  • Casio FC-200V-S-IH | User Guide - Page 94
    calculate. • In this example, use fc to select 6 "QTY". 3. Press l to perform the calculation. • The result of a 6 "QTY" (sales quantity) calculation is also assigned to variable 3 "QTY". Example 4: To calculate values. A QTY CONV. Sub-mode Financial Calculation Variables (VARS) • Variables SAL, PRC
  • Casio FC-200V-S-IH | User Guide - Page 95
    A Calculation Formulas SAL = PRC × QTY VC = VCU × QTY SAL : Sales Amount PRC : Sales Price QTY : Sales Quantity VC : Variable Cost VCU : Unit Variable Cost E-93
  • Casio FC-200V-S-IH | User Guide - Page 96
    the same calculation or input the same data. A Using Shortcut Keys Example: To configure the shortcut keys to simplify calculation of the and C/Y. • See "Compound Interest Mode" (page E-44) for more information. 3. Use fc to select "n". 4. Press 1t(STO). • A number sign (#) next to "Shortcut1" or
  • Casio FC-200V-S-IH | User Guide - Page 97
    5. Use fc to select STO "Shortcut1", and then press E. 6. In response to PV) + (-PMT) × n)) × 0.9 + ((-PV) + (-PMT) × n) • "FV", "PV" and "n" are financial calculation variables (VARS). 3. Perform the same operation as steps 4, 5, and 6 under "To configure the SHORTCUT1 key" to assign the above
  • Casio FC-200V-S-IH | User Guide - Page 98
    to the 2(Shortcut2) key. 5. Press E. • Pressing the E key calculates the net amount received after application of a 10% tax to the interest amount. A Initializing the Custom Shortcut Settings 1. O19(CLR) 2. "Shortcut:EXE" (fc), then E. 3. 1(Shortcut1) or 2(Shortcut2) 4. A Note • STAT Mode data
  • Casio FC-200V-S-IH | User Guide - Page 99
    the following steps will replace any existing data with the new data. 4. Use fc to select "FMEM1", and then press E. 5. In response to the confirmation E in step 5. u To use the configured function memory key in a calculation Example: To recall the inverse sin function assigned to the FMEM1 key •
  • Casio FC-200V-S-IH | User Guide - Page 100
    to input. You can also use a direct key operation to input the following functions. FC-200V Rnd(, sin(, cos(, tan(, x2, '(, ^(, e^(, ln( FC-100V Rnd(, sin(, cos(, tan(, e^(, 10^(, ^(, ln(, log(, x'( All calculations in this section are performed in the COMP Mode (g). k Pi (π) and Natural Logarithm
  • Casio FC-200V-S-IH | User Guide - Page 101
    then E. 3. 0.5)E k Hyperbolic and Inverse Hyperbolic Functions Example: sinh 1 = 1.175201194, cosh-1 1 = 0 1. t 2. "sinh" (fc), then E. 3. 1)E 1. t 2. "cosh-1" (fc), then E. 3. 1)E k Converting an Input Value to the Calculator's Default Angle Unit After inputting a value, press 1G(DRG') to display
  • Casio FC-200V-S-IH | User Guide - Page 102
    then E. 3. y1)E Z 1. t 2. "cos-1" (fc), then E. 3. y1)E k Exponential Functions and Logarithmic Functions • For the logarithmic function "log(", you can specify base m using the syntax "log (m, n)". If you input only a single value, a base of 10 is used for the calculation. • "ln(" is a natural
  • Casio FC-200V-S-IH | User Guide - Page 103
    if no base is specified. Example 3: ln 90 (= loge90) = 4.49980967 1. t 2. "ln(" (fc), then E. 3. 90)E Example 4: ln e = 1 1. t 2. "ln(" (fc), then E. 3. S5(e))E Example 5: e10 = 22026.46579 1. t 2. "e^(" (fc), then E. 3. 10)E k Power Functions and Power Root Functions Example 1: 1.2 × 103 = 1200
  • Casio FC-200V-S-IH | User Guide - Page 104
    2t 2. "3" (fc), then E. 3. E Example 4: ('2 + 1) ('2 - 1) = 1 1. (t 2. " '(" (fc), then E. 3. 2)+1)(t 4. " '(" (fc), then E. 5. 2)-1)E Example 5: 5 32 = 2 1. 5t 2. " x'(" (fc), then E. 3. 32)E Example 6: 3'5 + 3 -27 = -1.290024053 1. t 2. " 3'(" (fc), then E. 3. 5)+t 4. " 3'(" (fc), then E. 5. y27
  • Casio FC-200V-S-IH | User Guide - Page 105
    X, while y is assigned to Y. • If you perform coordinate conversion inside of an expression instead of a stand-alone operation, the calculation is performed using only the first value (either the r-value or the X-value) produced by the conversion. Example: Pol ('2, '2) + 5 = 2 + 5 = 7 E-103
  • Casio FC-200V-S-IH | User Guide - Page 106
    1)(,)15(') 2))E Example 2: (r, θ) = (2, 30) → (X, Y) z 1. t 2. " Rec(" (fc), then E. 3. 21)(,)30)E k Other Functions This section explains how to use the functions shown below. !, of a value that is zero or a positive integer. Example: (5 + 3)! = 40320 1. (5+3)t 2. " ! " (fc), then E. 3. E E-104
  • Casio FC-200V-S-IH | User Guide - Page 107
    (Abs) When you are performing a real number calculation, this function simply obtains the absolute value. Example: Abs (2 - 7) = 5 1. t 2. "Abs(" (fc), then E. 3. 2-7)E A Random Number (Ran#) This function generates a 3-digit pseudo random number that is less than 1. Example: To generate three
  • Casio FC-200V-S-IH | User Guide - Page 108
    Combination (nCr) These functions make it possible to perform permutation and combination calculations. n and r must be integers in the range of 0 < r possible for a group of 10 people? 1. 10t 2. "P" (fc), then E. 3. 4E 1. 10t 2. "C" (fc), then E. 3. 4E A Rounding Function (Rnd) This function rounds
  • Casio FC-200V-S-IH | User Guide - Page 109
    (Calculation is performed internally using 15 digits.) FIX 200/7E FIX *14E The following performs the same calculation with rounding. FIX 200/7E (Round the value to the specified number of digits.) FIX 10(Rnd)E (Check rounded result.) FIX *14E E-107
  • Casio FC-200V-S-IH | User Guide - Page 110
    are performed in the STAT Mode (7). A Selecting a Statistical Calculation Type In the STAT Mode, display the statistical calculation type selection screen. k Statistical Calculation Types Use fc to select Item, and then press E. Menu Item 1-VAR A+BX _+CX2 In X e^X A•B^X A•X^B 1/X Statistical
  • Casio FC-200V-S-IH | User Guide - Page 111
    that the following functions are not available on the STAT editor screen: multiple operations in calculation history memory, multi-statement input, and assignment to financial calculation variables. • Pressing A while inputting data clears your current input. • After inputting a value, press E. This
  • Casio FC-200V-S-IH | User Guide - Page 112
    26 lines • The following types of input are not allowed on the STAT editor screen. • m, 1m(M-) operations • Assignment to variables (STO) • Financial Calculation Variables (VARS) A Precautions Concerning Sample Data Storage • The STAT Editor and the CASH Mode DataEditor store data in the same area
  • Casio FC-200V-S-IH | User Guide - Page 113
    a Line" and "Deleting All STAT Editor Contents" only when the STAT editor screen is on the display. k STAT Calculation Screen The STAT calculation screen is for performing statistical calculations with the data you input with the STAT editor screen. Pressing the A key while the STAT editor screen is
  • Casio FC-200V-S-IH | User Guide - Page 114
    Paired-variable Statistics A STAT Menu Items Common Items Select this menu item: When you want to do this: 1Type Display the statistical calculation type selection screen 2Data Display the STAT editor screen 3Edit Display the Edit sub-menu for editing STAT editor screen contents 4Sum
  • Casio FC-200V-S-IH | User Guide - Page 115
    appear when you select 4(Sum), 5(Var) or 6(MinMax) on the STAT menu while a single-variable statistical calculation type is selected. Calculation formula used for each command o = Σx n xσn = Σ (x - o)2 n xσn -1 = Σ (x - o)2 n - 1 Sum Sub-menu (17(S-MENU)4(Sum)) Select this menu item: 1Σx2
  • Casio FC-200V-S-IH | User Guide - Page 116
    obtain this: 1minX Minimum value 2maxX Maximum value Single-variable Statistical Calculation Example 1: To select single-variable (1-VAR) and input the following 4, 5, 6, 7, 8, 9, 10} (FREQ: ON) Preparation 1. s 2. "STAT" (fc), then E. 3. 1(On) 7 STAT E(1-VAR) 1E 2E 3E 4E STAT 5E 6E 7E 8E
  • Casio FC-200V-S-IH | User Guide - Page 117
    : ON) STAT 17(S-MENU)2(Data)e STAT c2E c2E 2E 2E 3E 4E 2E STAT A • Examples 4 through 7 all use the same data as Example 3. Example 4: To calculate sum of squares of the sample data and sum of the sample data. 17(S-MENU)4(Sum) STAT 1(Σx2)E E-115
  • Casio FC-200V-S-IH | User Guide - Page 118
    STAT 17(S-MENU)4(Sum) 2(Σx)E Example 5: To calculate number of samples, mean, and population standard deviation. 17(S-MENU)5(Var) STAT 1(n)E STAT 17(S-MENU)5(Var) 2(o)E STAT 17(S-MENU)5(Var) 3(xσn)E Example 6: To calculate minimum value and maximum value. 17(S-MENU)6(MinMax) STAT 1(minX)E STAT 17(S-
  • Casio FC-200V-S-IH | User Guide - Page 119
    or 7(Reg) on the STAT menu while linear regression is selected as the statistical calculation type. Calculation formula used for each command o = Σx n xσn = Σ (x - o)2 n xσn -1 = p = Σy n Σ (x - o)2 n - 1 yσn = Σ (y - p)2 n yσn -1 = Σ (y - p)2 n - 1 A = Σy - B.Σx n B = n.Σxy - n.Σx2
  • Casio FC-200V-S-IH | User Guide - Page 120
    Sum Sub-menu (17(S-MENU)4(Sum)) Select this menu item: When you want to obtain this: 1Σx2 Sum of squares of the X-data 2Σx Sum of the X-data 3Σy2 Sum of squares of the Y-data 4Σy Sum of the Y-data 5Σxy Sum of products of the X-data and Y-data 6Σx3 Sum of cubes of the X-data 7Σx2y Sum
  • Casio FC-200V-S-IH | User Guide - Page 121
    5n Estimated value of y Linear Regression Calculation • Examples 8 through 10 all use the data input in 1.2 1.1 2.4 1.6 1.5 1.2 2.5 1.7 1.6 1.3 2.7 1.8 1.9 1.4 3.0 2.0 1. s 2. "STAT" (fc), then E. 3. 2(Off) 7 STAT cE(A+BX) 1E 1.2E 1.5E 1.6E STAT 1.9E 2.1E 2.4E 2.
  • Casio FC-200V-S-IH | User Guide - Page 122
    STAT ce1E 1.1E 1.2E 1.3E 1.4E STAT 1.5E 1.6E 1.7E 1.8E 2E STAT A Example 8: 17(S-MENU)4(Sum) STAT 5(Σxy)E 17(S-MENU)5(Var) STAT 3(xσn)E 17(S-MENU) 6(MinMax) STAT 4(maxY)E E-120
  • Casio FC-200V-S-IH | User Guide - Page 123
    10: Estimated Value (y = -3 → m = ?) STAT y317(S-MENU) 7(Reg)4(m)E Estimated Value (x = 2 → n = ?) STAT 217(S-MENU) 7(Reg)5(n)E A Commands when Quadratic Regression Calculation (_+CX2) Is Selected With quadratic regression, regression is performed in accordance with the following model equation
  • Casio FC-200V-S-IH | User Guide - Page 124
    Calculation formula used for each command ( ) ( ) Σy Σx Σx2 A= n -B n -C n Sxy.Sx2x2 - Sx2y.Sxx2 B = Sxx.Sx2x2 - (Sxx )2 2 Sx2y.Sxx - Sxy.Sxx2 C = Sxx.Sx2x2 - (Sxx2)2 Sxx = Σx2- (Σx)2 n Sxy = Σxy - (Σx.Σy) n Sxx2 = Σ
  • Casio FC-200V-S-IH | User Guide - Page 125
    of samples, mean, standard deviation), and MinMax submenu (maximum value, minimum value) operations are the same those for linear regression calculations. Quadratic Regression Calculation • Examples 11 through 13 all use the data input in Example 7 (page E-119). Example 11: 17(S-MENU)1(Type) STAT
  • Casio FC-200V-S-IH | User Guide - Page 126
    formula of the command included in each regression type, refer to the indicated calculation formulas. Statistical Calculation Type Model Equation Logarithmic Regression (ln X) y = A + Bln X e Exponential Regression (e^X) y = AeBX ab Exponential Regression (A•B^X) y = ABX Power Regression
  • Casio FC-200V-S-IH | User Guide - Page 127
    Logarithmic Regression (ln X) Σy - B.Σlnx A = n n.Σ(lnx)y - Σlnx.Σy B = n.Σ(lnx)2 - (Σlnx)2 r = n.Σ(lnx)y - Σlnx.Σy {n.Σ(lnx)2 - (Σlnx)2}{n.Σy2 - (Σy)2} y - A m=e B n = A + Blnx e Exponential Regression (e^X) ( ) A = exp Σlny - B.Σx n n.Σxlny - Σx.Σlny B = n.Σx2 - (Σx)2 r = n.Σxlny -
  • Casio FC-200V-S-IH | User Guide - Page 128
    Power Regression (A•X^B) ( ) A = exp Σlny - B.Σlnx n n.Σlnxlny - Σlnx.Σlny B = n.Σ(lnx)2 - (Σlnx)2 r = n.Σlnxlny - Σlnx.Σlny {n.Σ(lnx)2 - (Σlnx)2}{n.Σ(lny)2 - (Σlny)2} ln y - ln A m=e B n = AxB Inverse Regression (1/X) Σy - B.Σx-1 A = n Sxy B = Sxx r = Sxy Sxx .Syy Sxx = Σ(x-1)2 -
  • Casio FC-200V-S-IH | User Guide - Page 129
    Comparison of Regression Curves • The following example uses the data input in Example 7 (page E-119). Example 14: To compare the correlation coefficient for logarithmic, e exponential, ab exponential, power, and inverse regression. (FREQ: OFF) 17(S-MENU)1(Type) cccE(In X)A STAT 17(S-MENU)7(Reg)
  • Casio FC-200V-S-IH | User Guide - Page 130
    Other Types of Regression Calculation Example 15: y = A + Blnx x y 1. s 29 1.6 2. "STAT" (fc), then E. 50 23.5 3. 2(Off) 74 38.0 103 46.4 118 48.9 7cccE(ln X) STAT 29E 50E 74E 103E 118E ce1.6E STAT 23.5E 38E 46.
  • Casio FC-200V-S-IH | User Guide - Page 131
    Example 16: y = AeBx x y 6.9 21.4 1. s 2. "STAT" (fc), then E. 12.9 15.7 3. 2(Off) 19.8 12.1 26.7 8.5 35.1 5.2 7ccccE(e^X) 6.9E 12.9E STAT 19.8E 26.7E 35.1E ce21.4E STAT 15.7E 12.
  • Casio FC-200V-S-IH | User Guide - Page 132
    Example 17: y = ABx x y 1. s -1 0.24 2. "STAT" (fc), then E. 3 4 3. 2(Off) 5 16.2 10 513 7cccccE(A•B^X) STAT y1E 3E 5E 10E STAT ce0.24E 4E 16.2E 513E STAT A17(S-MENU) 7(Reg)1(A)E STAT 17(S-MENU) 7(
  • Casio FC-200V-S-IH | User Guide - Page 133
    Example 18: y = AxB x y 1. s 28 2410 2. "STAT" (fc), then E. 30 3033 3. 2(Off) 33 3895 35 4491 38 5717 7ccccccE(A•X^B) STAT 28E 30E 33E 35E 38E ce2410E 3033E STAT 3895E 4491E 5717E STAT A17(S-
  • Casio FC-200V-S-IH | User Guide - Page 134
    Example 19: y = A + -Bx- x y 1. s 1.1 18.3 2. "STAT" (fc), then E. 2.1 2.9 9.7 6.8 3. 2(Off) 4.0 4.9 4.9 4.1 7cccccccE(1/X) 1.1E 2.1E STAT 2.9E 4E 4.9E ce18.3E STAT 9.7E 6.8E 4.9E 4.1E STAT A17(S-MENU) 7(Reg)1(A)E STAT 17(S-MENU) 7(Reg)2(B)E STAT
  • Casio FC-200V-S-IH | User Guide - Page 135
    A Command Usage Tips • The commands included in the Reg sub-menu can take a long time to execute in logarithmic, e exponential, ab exponential, or power regression calculation when there are a large number of data samples. E-133
  • Casio FC-200V-S-IH | User Guide - Page 136
    : Multiplication sign omitted immediately before π, e, variables (2π, 5A, πA, etc.), functions with parentheses (2'(3), Asin(30), etc.) 7. Addition and subtraction: +, - If a calculation contains a negative value, you may need to enclose the negative value in parentheses. If you want to square the
  • Casio FC-200V-S-IH | User Guide - Page 137
    (fc), then E. 4. E (-2)2 = 4 1. (y2) 2. t 3. "2" (fc), then E. 4. E Multiplication and division, and multiplication where the sign is omitted are the same priority (Priority 6), so these operations are performed from left to right when both types are mixed in the same calculation. Enclosing
  • Casio FC-200V-S-IH | User Guide - Page 138
    uses memory areas called stacks to temporarily store lower calculation priority sequence values, commands, and functions. The 23 34 45 54 Command Stack 1҂ 2 3 4ѿ 5҂ 6 7ѿ A Stack ERROR occurs when the calculation you are performing causes the capacity of either stack to be exceeded. E-136
  • Casio FC-200V-S-IH | User Guide - Page 139
    Precision for exponential display is ±1 at the least significant digit. Errors are cumulative in the case of consecutive calculations. Function Calculation Input Ranges and Precision Functions Input Range sinx DEG 0Ϲ ȊxȊ Ͻ9҂109 cosx RAD 0Ϲ ȊxȊ Ͻ157079632.7 GRA 0Ϲ ȊxȊ Ͻ1҂1010 DEG 0Ϲ ȊxȊ Ͻ9҂109
  • Casio FC-200V-S-IH | User Guide - Page 140
    Range and Precision" on page E-137. • ^(xy), x'y, 3', x!, nPr, nCr type functions require consecutive internal calculation, which can cause accumulation of errors that occur with each calculation. • Error is cumulative and tends to be large in the vicinity of a function's singular point and
  • Casio FC-200V-S-IH | User Guide - Page 141
    1902 through December 31, 2097 (BOND Mode only) Positive natural number Natural number from 1 to 12 k Special Financial Calculation Error Messages Compound Interest Mode When calculating "n" I < -100 Math ERROR When calculating "I" "PV", "PMT", "FV" are the same sign Math ERROR n < 0 Math ERROR
  • Casio FC-200V-S-IH | User Guide - Page 142
    error message appeared. You can then reinput and re-execute the calculation, if you want. Note that in this case, the original calculation will not be retained in calculation history memory. • See "Special Financial Calculation Error Messages" (E-139) for information about error messages that may
  • Casio FC-200V-S-IH | User Guide - Page 143
    expression so it does not exceed the capacity of the stack. • Try splitting the calculation into two or more parts. Syntax ERROR Cause • There is a problem with the format of the calculation you are performing. Action • Make necessary corrections. Insufficient MEM Error Cause • The number of
  • Casio FC-200V-S-IH | User Guide - Page 144
    and calculate the result. Argument ERROR Cause • Financial conditions insufficient for financial calculations (such calculator... Perform the following steps whenever an error occurs during a calculation or when calculation results are not what you expected. If one step does not correct the problem
  • Casio FC-200V-S-IH | User Guide - Page 145
    Reference k Power Requirements and Battery Replacement FC-200V Your calculator uses a TWO WAY POWER system that combines a solar cell with G13 type button battery (LR44). Normally, calculators equipped with a solar cell alone can operate only when relatively bright light is present. The TWO WAY
  • Casio FC-200V-S-IH | User Guide - Page 146
    operation. Do not skip it. • Replacing the battery initializes the calculator, including the custom shortcut keys and function shortcut keys. See "Initializing the Calculator" (page E-3) for more information. FC-100V This calculator is powered by a single AAA-size battery (R03 (UM-4)). A Replacing
  • Casio FC-200V-S-IH | User Guide - Page 147
    place with its screws. 6. Perform the following key operation: (1) O19(CLR) (2) "All:EXE" (fc), then E (3) E(Yes) (4) A • Make sure you perform the above key operation. Do not skip it. Auto Power Off Your calculator will turn off automatically if you do not perform any operation for about six
  • Casio FC-200V-S-IH | User Guide - Page 148
    Specifications FC-200V Power Requirements: Solar Cell: Built into the front of the calculator Button Battery: G13 Type (LR44) × 1 (D) Approximate Weight: 105g (3.7 oz) including the battery Bundled Items: Hard Case FC-100V Power Requirements: AAA-size battery: R03 (UM-4) × 1 Battery Life:
  • Casio FC-200V-S-IH | User Guide - Page 149
    CASIO COMPUTER CO., LTD. 6-2, Hon-machi 1-chome Shibuya-ku, Tokyo 151-8543, Japan SA0409-C Printed in China
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
FC-200V
FC-100V
User's Guide
RCA501407-001V03
E